u-boot.git/board/synopsys, branch v2015.04

board: axs10x - support v3 mother-board

2015-04-09T17:00:46+00:00

There're 2 versions of motherboards that could be used in ARC SDP.
The only important difference for U-Boot is different NAND IC in use:
 [1] v2 board (we used to support up until now) sports MT29F4G08ABADAWP
while
 [2] v3 board sports MT29F4G16ABADAWP

They are almost the same except data bus width 8-bit in [1] and 16-bit
in [2]. And for proper support of 16-bit data bus we have to pass
NAND_BUSWIDTH_16 option to NAND driver core - which we do now knowing
board type we're running on.

Signed-off-by: Alexey Brodkin

board: AXS10x - update SDIO clock value

2015-04-03T06:47:50+00:00

With the most recent board firmware correct SDIO clock is 50MHz as
opposed to 25 MHz before.

Also set max frequency of MMC data exchange equal to SDIO clock -
because there's no way to transfer data faster than interface clock.

Signed-off-by: Alexey Brodkin

arc: add selection of endianess in Kconfig

2015-02-09T13:41:20+00:00

This change allows to keep board description clean and minimalistic.
This is especially helpful if one board may house different CPUs with
different features.

It is applicable to both FPGA-based boards or those that have CPUs
mounted on interchnagable daughter-boards.

Signed-off-by: Alexey Brodkin

board/synopsys: remove selection of CPU from the board

2015-01-15T19:40:49+00:00

Both ARCangel4 and AXS10x are FPGA-based boards so they may have
different CPUs. For now we have only 1 option (ARC700) and we define
this as default in arch Kconfig.

Signed-off-by: Alexey Brodkin

kconfig: remove redundant "string" type in arch and board Kconfigs

2014-09-13T20:43:55+00:00

Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
are specified in arch/Kconfig.

We can delete the ones in arch and board Kconfig files.

This commit can be easily reproduced by the following command:

find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
    N
    s/\n[[:space:]]*string//
}
'

Signed-off-by: Masahiro Yamada

axs101: Fix type mismatch warning

2014-08-26T14:54:02+00:00

Initialization of pointer from integer shall be designated by explicit
type cast.

Signed-off-by: Vasili Galka 
Cc: Alexey Brodkin

Add board MAINTAINERS files

2014-07-30T12:48:06+00:00

We have switched to Kconfig and the boards.cfg file is going to
be removed. We have to retrieve the board status and maintainers
information from it.

The MAINTAINERS format as in Linux Kernel would be nice
because we can crib the scripts/get_maintainer.pl script.

After some discussion, we chose to put a MAINTAINERS file under each
board directory, not the top-level one because we want to collect
relevant information for a board into a single place.

TODO:
Modify get_maintainer.pl to scan multiple MAINTAINERS files.

Signed-off-by: Masahiro Yamada 
Suggested-by: Tom Rini 
Acked-by: Simon Glass

kconfig: add board Kconfig and defconfig files

2014-07-30T12:48:01+00:00

This commit adds:
 - arch/${ARCH}/Kconfig
    provide a menu to select target boards
 - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
 - configs/${TARGET_BOARD}_defconfig
    default setting of each board

(This commit was automatically generated by a conversion script
based on boards.cfg)

In Linux Kernel, defconfig files are located under
arch/${ARCH}/configs/ directory.
It works in Linux Kernel since ARCH is always given from the
command line for cross compile.

But in U-Boot, ARCH is not given from the command line.
Which means we cannot know ARCH until the board configuration is done.
That is why all the "*_defconfig" files should be gathered into a
single directory ./configs/.

Signed-off-by: Masahiro Yamada 
Acked-by: Simon Glass

axs101: flush DMA buffer descriptors before DMA transactons starts

2014-03-28T19:06:30+00:00

CPU sets DMA buffer descriptors with data required for inetrnal DMA such as:
 * Ownership of BD
 * Buffer size
 * Pointer to data buffer in memory

Then we need to make sure DMA engine of NAND controller gets proper data.
For this we flush buffer rescriptor.

Then we're  ready for DMA transaction.

Signed-off-by: Alexey Brodkin 

Cc: Vineet Gupta 
Cc: Tom Rini

arc: arcangel4: set board entry to fix a build error

2014-03-04T17:15:31+00:00

There are no source files in board/synopsys/arcangel4/
directory.

Signed-off-by: Masahiro Yamada 
Cc: Alexey Brodkin