u-boot.git/board/synopsys, branch v2018.07

ARC: EMDK: Add readme

2018-06-21T11:55:01Z

Signed-off-by: Alexey Brodkin

ARC: HSDK: Add readme

2018-06-15T12:54:43Z

Signed-off-by: Alexey Brodkin

ARC: HSDK: Add tool and make target to generate bsp

2018-06-15T12:54:43Z

HSDK board has preloader that reads SPI flash pages and searches for a special image header to fetch and load binary. Add tool, make target (bsp-generate) to generate update script and u-boot binary image with header for preloader. Also add script to default environment to apply updates. Signed-off-by: Eugeniy Paltsev Signed-off-by: Alexey Brodkin

ARC: Add support for EM Development Kit board

2018-05-31T17:13:29Z

Synopsys DesignWare ARC EM Development Kit (ARC EMDK) is an FPGA-based development platform from Synopsys aimed to speed-up development of software for ARC EM cores and entire subsystems based on ARC EM like Data Fusion, Secure and Sensor & Control subsystems. U-Boot is supposed to be used as a primary bootloader on EMDK allowing users to easily load and start their application from micro-SD card. Signed-off-by: Alexey Brodkin

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

ARC: HSDK: Add platform-specific commands

2018-04-02T09:27:56Z

This patch add support of hsdk platform-specific commands: hsdk_clock set - set clock from axi_freq, cpu_freq and tun_freq environment variables/command line arguments hsdk_clock get - save clock frequencies to axi_freq, cpu_freq and tun_freq environment variables hsdk_clock print - show CPU, AXI, DDR and TUNNEL current clock frequencies. hsdk_clock print_all - show all currently used clock frequencies. hsdk_init - setup board HW in one of pre-defined configuration (hsdk_hs34 / hsdk_hs36 / hsdk_hs36_ccm / hsdk_hs38 / hsdk_hs38_ccm / hsdk_hs38x2 / hsdk_hs38x3 / hsdk_hs38x4) hsdk_go - run baremetal application on hsdk configured by hsdk_init command. This patch changes default behaviour of 'bootm' command: now we are able to set number of CPUs to be kicked by setting 'core_mask' environment variable before 'bootm' command run. Signed-off-by: Eugeniy Paltsev Signed-off-by: Alexey Brodkin

ARC: bootm: Refactor GO and PREP subcommands implementation

2018-03-23T12:57:51Z

Refactor GO and PREP subcommands implementation for a simpler override in the boards platform code. Signed-off-by: Eugeniy Paltsev Signed-off-by: Alexey Brodkin

ARC: HSDK: Fixup DW SDIO CIU frequency to 50000000Hz

2017-12-11T08:36:22Z

DW SDIO controller has external CIU clock divider controlled via register in the SDIO IP. Due to its unexpected default value (we expected it to divide by 1 but in reality it divides by 8) SDIO IP uses wrong CIU clock (it should be 100000000Hz but actual is 12500000Hz) and works unstable (see STAR 9001204800). So increase SDIO CIU frequency from actual 12500000Hz to 50000000Hz by switching from the default divisor value (div-by-8) to the minimum possible value of the divisor (div-by-2) in HSDK platform code. Signed-off-by: Eugeniy Paltsev Signed-off-by: Alexey Brodkin

arc: Add support for HS Development Kit board

2017-06-29T16:34:10Z

ARC HS Development Kit board is a new low-cost development platform sporting ARC HS38 in real silicon with nice set of features such as: * Quad-core ARC HS38 with 512 kB L2 cache and running @1GHz * 4Gb of DDR (we use only lowest 1Gb out of it now) * Lots of DesigWare peripherals * Different connectivity modules: - Synopsys HAPS HT3 - Arduino-compatible connector - MikroBUS This initial commit supports the following peripherals: * UART (DW 8250) * Ethernet (DW GMAC) * SD/MMC (DW Mobile Storage) * USB 1.1 & 2.0 Signed-off-by: Alexey Brodkin

axs103: Support slave core kick-start on axs103 v1.1 firmware

2017-03-31T19:09:36Z

In axs103 v1.1 procedure to kick-start slave cores has changed quite a bit compared t previous implementation. In particular: * We used to have a generic START bit for all cores selected by CORE_SEL mask. But now we don't touch CORE_SEL at all because we have a dedicated START bit for each core: bit 0: Core 0 (master) bit 1: Core 1 (slave) * Now there's no need to select "manual" mode of core start Additional challenge for us is how to tell which axs103 firmware we're dealing with. For now we'll rely on ARC core version which was bumped from 2.1c to 3.0. Signed-off-by: Alexey Brodkin