u-boot.git/board/technexion, branch v2017.05

ti: boot: Register the MMC controllers in SPL in the same way as in u-boot

2017-03-20T02:17:14Z

To keep a consistent MMC device mapping in SPL and in u-boot, let's register the MMC controllers the same way in u-boot and in the SPL. In terms of boot time, it doesn't hurt to register more controllers than needed because the MMC device is initialized only prior being accessed for the first time. Having the same device mapping in SPL and u-boot allows us to use the environment in SPL whatever the MMC boot device. Signed-off-by: Jean-Jacques Hiblot

mmc: move more driver config options to Kconfig

2017-01-11T10:40:15Z

Move (and rename) the following CONFIG options to Kconfig: CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI) CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS) CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC) CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS) CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA) CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI) They are the same option names as used in Linux. This commit was created as follows: [1] Rename the options with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e ' s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g ' [2] Commit the changes [3] Create entries in driver/mmc/Kconfig. (copied from Linux) [4] Move the options with the following command tools/moveconfig.py -y -r HEAD \ MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI [5] Sort and align drivers/mmc/Makefile for readability Signed-off-by: Masahiro Yamada Reviewed-by: Marek Vasut

imx: s/docs\/README.imximage/doc\/README.imximage/g

2016-10-26T14:53:16Z

Fixed typo for doc/README.imximage on respective imximage.cfg files. Cc: Tom Rini Cc: Stefano Babic Cc: Fabio Estevam Acked-by: Peng Fan Signed-off-by: Jagan Teki

Various, accumulated typos collected from around the tree.

2016-10-07T00:57:40Z

Fix various misspellings of: * deprecated * partition * preceding,preceded * preparation * its versus it's * export * existing * scenario * redundant * remaining * value * architecture Signed-off-by: Robert P. J. Day Reviewed-by: Jagan Teki Reviewed-by: Stefan Roese

pico-imx6ul: Directly write to register LDOGCTL

2016-09-06T16:22:48Z

Register LDOGCTL contains only bit 0 as a valid bit, so there is no need to do a read-modify-write operation. Simplify the code by writing directly to this register. Signed-off-by: Fabio Estevam

pico-imx6ul: Add PMIC support

2016-07-19T17:52:12Z

Add PMIC support. Tested by command "pmic PFUZE3000 dump". Signed-off-by: Vanessa Maegima Reviewed-by: Fabio Estevam

pico-imx6ul: Add USB Host support

2016-07-12T15:58:50Z

Add USB host support. Tested by connecting a USB pen drive: => usb start starting USB... USB0: Port not available. USB1: USB EHCI 1.00 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Signed-off-by: Vanessa Maegima Reviewed-by: Fabio Estevam

pico-imx6ul: Add a README file

2016-07-12T15:58:49Z

Add a README file to help users to install U-boot binary into the eMMC. Signed-off-by: Vanessa Maegima Reviewed-by: Fabio Estevam

pico-imx6ul: Add Ethernet support

2016-07-12T15:58:49Z

Pico-imx6ul has a KSZ8081 Ethernet PHY. Add support for it. Signed-off-by: Diego Dorta Acked-by: Fabio Estevam Reviewed-by: Stefano Babic

Add initial support for Technexion's PICO-IMX6UL-EMMC board

2016-04-19T14:37:36Z

Add support for Technexion's PICO-IMX6UL-EMMC board. For information about this board, please visit: http://www.technexion.com/products/pico/pico-som/pico-imx6-emmc Signed-off-by: Richard Hu Signed-off-by: Fabio Estevam