u-boot.git/board/thecus, branch next Unnamed repository; edit this file 'description' to name the repository. arm: mvebu: Enable gpio-fan for Thecus N2350 board 2023-07-13T08:26:27+00:00 Tony Dinh mibodhi@gmail.com 2023-06-20T23:20:22+00:00 71222816d2e66ccc24f8edc8ae9d9a6f1c75f63c Add gpio-fan in the DTS and enable the GPIO in board file to start the fan during boot. Note that this patch depends on https://patchwork.ozlabs.org/project/uboot/patch/20230606214539.4229-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> 
Add gpio-fan in the DTS and enable the GPIO in board file to start the fan
during boot.

Note that this patch depends on
https://patchwork.ozlabs.org/project/uboot/patch/20230606214539.4229-1-mibodhi@gmail.com/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
arm: mvebu: Power up 2nd SATA port for Thecus N2350 2023-02-13T09:14:50+00:00 Tony Dinh mibodhi@gmail.com 2023-02-07T01:00:11+00:00 384e2d396c378063749849739e6b528be59c4071 Currently, only the 1st SATA port is powered up (by GPIO1 12). Add GPIO1 13 in board initialization to power up the 2nd SATA port. Note that this patch depends on the initial add-support patch: https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> 
Currently, only the 1st SATA port is powered up (by GPIO1 12).
Add GPIO1 13 in board initialization to power up the 2nd SATA port.

Note that this patch depends on the initial add-support patch:
https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
arm: mvebu: Add support for Thecus N2350 (Armada 385) board 2023-02-13T09:14:50+00:00 Tony Dinh mibodhi@gmail.com 2023-02-01T23:13:05+00:00 3fdd09f90f829e8f4e576c65772e9c80d8930d7d Thecus N2350 is a NAS based on Marvell Armada 385 SoC. Specification: - Processor: Marvel MV88F6820 Dual Core at 1GHz - 1 GiB DDR4 RAM - 4MB Macronix mx25l3205d SPI flash - 512MB Hynix H27U4G8F2DTR-BC NAND flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 2x SATA (hot swap slots) - 3x buttons - 10x LEDS - serial console Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> 
Thecus N2350 is a NAS based on Marvell Armada 385 SoC.

Specification:

- Processor: Marvel MV88F6820 Dual Core at 1GHz
- 1 GiB DDR4 RAM
- 4MB Macronix mx25l3205d SPI flash
- 512MB Hynix H27U4G8F2DTR-BC NAND flash
- I2C
- 2x USB 3.0
- 1x GBE LAN port (PHY: Marvell 88E1510)
- 2x SATA (hot swap slots)
- 3x buttons
- 10x LEDS
- serial console

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>