u-boot.git/board/toradex, branch v2017.01

arm: imx: initial support for colibri imx6

2016-12-16T09:03:43Z

This adds board support for the Toradex module family Colibri iMX6. The familiy consists of a module with i.MX6 DualLite, i.MX6 Solo, both with a version for commercial and industrial temperature range. Signed-off-by: Max Krummenacher

arm: imx: initial support for apalis imx6

2016-12-16T09:02:45Z

This adds board support for the Toradex module family Apalis iMX6. The familiy consists of a module with i.MX6 Dual, i.MX6 Quad with commercial and industrial temperature range. Signed-off-by: Max Krummenacher

colibri_vf: use same NAND clock as Linux uses

2016-12-16T08:56:38Z

Currently a divider of 6 has been used, leading to following NAND Flash Controller (NFC) clocks: VF61: 27.7 MHz (166.7MHz bus clock) VF50: 22 MHz (132MHz bus clock) The NAND Flash Memory used on VF50 allows to use clock speed of up to 33MHz, while the Flash Memory of VF61 allows 50MHz. We can use the same divider of 4 on both modules to configure the maximal possible clock speeds: VF61: 41.7 MHz VF50: 33 MHz Signed-off-by: Stefan Agner

colibri_vf: cleanup USB clock initialization

2016-12-16T08:56:38Z

Use the same preprocessor define to enable clocks as we use to enable the driver. Make sure that the necessary PLL's are on (they get enabled by boot ROM by default, so this is more for completness). Signed-off-by: Stefan Agner

colibri_vf: use device-tree for MTD partitions

2016-12-16T08:56:38Z

Use device-tree fixup to communicate the MTD partitions to the kernel. U-Boot's mtdparts environment variable will be used as partition source for the device-tree based partition table too. Signed-off-by: Stefan Agner

toradex: allow custom fdt board setup in board file

2016-12-16T08:56:38Z

The config block support currently uses the ft_board_setup function to patch the device tree with config block information. However, this does not allow to patch the device tree with board specific information. Rename the common setup function to ft_common_board_setup and use the call it from the board files directly. Signed-off-by: Stefan Agner

toradex: fix USB Download gadget fixup callback

2016-12-16T08:56:38Z

Use the proper config option to guard the USB Download Function fixup callback. Signed-off-by: Stefan Agner

colibri_vf: usb gadget: toradex pid is now set generically

2016-11-28T20:10:33Z

remove now unused CONFIG_TRDX_PID_XXX Signed-off-by: Marcel Ziswiler Acked-by: Stefan Agner Acked-by: Max Krummenacher

apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handling

2016-11-28T20:10:33Z

With our common code in place actually make use of it across all our modules. Signed-off-by: Marcel Ziswiler Acked-by: Max Krummenacher

toradex: config block handling

2016-11-28T20:10:32Z

Add Toradex factory configuration block handling. The config block is a data structure which gets stored to flash during production testing. The structure holds such information as board resp. hardware revision, product ID and serial number which is used as the NIC part of the Ethernet MAC address as well. The config block will be read upon boot by the show_board_info() function, displayed as part of the board information and passed to Linux via device tree or ATAGs. Signed-off-by: Marcel Ziswiler Acked-by: Max Krummenacher