u-boot.git/board/toradex, branch v2018.03

libfdt: move headers to and

2018-03-05T15:16:28Z

Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include -> #include #include -> #include Reported-by: Thomas Petazzoni Signed-off-by: Masahiro Yamada

toradex: imx6: Rework PF0100 fuse programming commands to not be in SPL

2018-01-12T13:28:04Z

The code for programming the OTP fuses on the PMIC PF0100 can only be used in full U-Boot, so do not build / link it into SPL. Cc: Max Krummenacher Cc: Stefano Babic Cc: Fabio Estevam Signed-off-by: Tom Rini Reviewed-by: Fabio Estevam Tested-by: Max Krummenacher

imx: Include header file

2017-10-12T15:31:16Z

When building with W=1 errors like the one below is seen: board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning: no previous prototype for ‘overwrite_console’ [-Wmissing-prototypes] int overwrite_console(void) Fix the build warnings by including . Signed-off-by: Diego Dorta Reviewed-by: Fabio Estevam

colibri_imx6: Avoid calling setup_display() from SPL code

2017-10-12T15:30:32Z

There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic Signed-off-by: Fabio Estevam

apalis_imx6: Avoid calling setup_display() from SPL code

2017-10-12T15:30:32Z

There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic Signed-off-by: Fabio Estevam

toradex: imx6: Move g_dnl_bind_fixup() into common SPL code

2017-09-20T13:34:59Z

Instead of having every board file to add its own g_dnl_bind_fixup() implementation, move it to the common imx6 SPL code. Signed-off-by: Fabio Estevam Reviewed-by: Łukasz Majewski

imx: imx7d: remove CamelCase from ENET_xMHz macros

2017-09-18T15:15:28Z

Update these macros to use all upper-case to avoid checkpatch warnings: ENET_25MHz, ENET_50MHz, ENET_125MHz, Signed-off-by: Eric Nelson Reviewed-by: Stefano Babic

blk: Remove various places that do flush cache after read

2017-09-15T12:05:10Z

All these places seem to inherit the codes from the MMC driver where a FIXME was put in the comment. However the correct operation after read should be cache invalidate, not flush. The underlying drivers should be responsible for the cache operation. Remove these codes completely. Signed-off-by: Bin Meng Reviewed-by: Stefan Roese Reviewed-by: York Sun Reviewed-by: Joe Hershberger Reviewed-by: Simon Glass Tested-by: York Sun

imx: imx6: Move gpr_init() function to soc.c

2017-08-28T07:48:53Z

Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D, MX6Q and MX6QP processors move it to the soc.c file. Signed-off-by: Breno Lima Acked-by: Stefano Babic Reviewed-by: Lukasz Majewski Reviewed-by: Fabio Estevam

apalis/colibri_imx6: use independent USB PID for SPL

2017-08-23T08:41:58Z

Use a completely independent USB Product ID for SPL. This allows to differentiate a SDP running in SPL and SDP running in a U-Boot which could not read the config block successfully. Signed-off-by: Stefan Agner Acked-by: Max Krummenacher Reviewed-by: Łukasz Majewski