u-boot.git/board/toradex, branch v2020.01

colibri_imx6: fix broken fsl_esdhc_imx conversion

2019-12-27T08:35:29Z

Not all CONFIG_FSL_ESDHC defines were properly replaced with CONFIG_FSL_ESDHC_IMX, which broke U-boot proper booting on Colibri iMX6 SoMs. U-boot is stuck after this message: Commercial temperature grade DDR3 timings, 64bit bus width. Trying to boot from MMC1 Fixes: e37ac717d7("Convert to use fsl_esdhc_imx for i.MX platforms") Signed-off-by: Igor Opaniuk

Merge tag 'u-boot-atmel-fixes-2020.01-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

2019-12-11T13:16:16Z

- First set of u-boot-atmel fixes for 2020.01 cycle: This set includes a small fix for gpio bank names, one for removing unused headers (also touches some other boards), and a fix for the QSPI env read on one of the boards.

board: colibri_imx7: reserve DDR memory for Cortex-M4

2019-12-06T11:09:30Z

i.MX 7's Cortex-M4 core can run from DDR and uses DDR memory for the rpmsg communication. Both use cases need a fixed location of memory reserved. For the rpmsg use case the reserved area needs to be in sync with the kernel's hardcoded vring descriptor location. Use the linux,usable-memory property to carve out 1MB of memory in case the M4 core is running. Also make sure that the i.MX 7 specific rpmsg driver does not get loaded in case we do not carve out memory. Signed-off-by: Stefan Agner Signed-off-by: Igor Opaniuk Reviewed-by: Oleksandr Suvorov

board: Remove unnecessary inclusion of micrel.h from boards

2019-12-03T08:17:25Z

Several boards still unnecessarily included micrel.h but no longer require it since the switch to Device Tree configuration. Signed-off-by: James Byrne

common: Move some board functions out of common.h

2019-12-02T23:25:21Z

A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

common: Move some cache and MMU functions out of common.h

2019-12-02T23:23:55Z

These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

ARM: dts: imx6ull-colibri: change hierarchy of DTS files

2019-11-03T16:04:16Z

Introduce imx6ull-colibri-u-boot.dtsi for u-boot specific properties to keep original imx6ull-colibri.dts in sync with Linux. Move all contents of imx6ull-colibri.dts to imx6ull-colibri.dtsi + additionally fix checkpatch warnings. Reviewed-by: Oleksandr Suvorov Reviewed-by: Fabio Estevam Signed-off-by: Igor Opaniuk

colibri_imx7: provide proper node name to pmic_get

2019-10-13T20:49:12Z

Implementation of pmic_get() uses uclass_find_device_by_name(), which behaviour was changed in 4213609cc7 ("drivers: core: use strcmp when find device by name"). Now we have to supply full node name with unit address. Fixes boot issue: U-Boot 2019.07-00788-g0ef6e69a1e-dirty (Jul 19 2019 - 15:27:02 +0300) CPU: Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 41C Reset cause: POR DRAM: 512 MiB initcall sequence 9ffd3a4c failed at call 87803c61 (err=-19) ERROR Please RESET the board Fixes: 4213609cc7("drivers: core: use strcmp when find device by name") Signed-off-by: Igor Opaniuk Reviewed-by: Oleksandr Suvorov

imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB

2019-10-08T14:36:37Z

CONFIG_SECURE_BOOT is too generic and forbids to use it for cross architecture purposes. If Secure Boot is required for imx, this means to enable and use the HAB processor in the soc. Signed-off-by: Stefano Babic

apalis_imx6: fix broken fsl_esdhc_imx conversion

2019-10-08T14:35:16Z

Commit e37ac717d796 ("Convert to use fsl_esdhc_imx for i.MX platforms") converted FSL_ESDHC to FSL_ESDHC_IMX, but the config check for apalis_imx6 wasn't updated accordantly. Signed-off-by: Ricardo Salveti Reviewed-by: Peng Fan Acked-by: Max Krummenacher