u-boot.git/board/udoo, branch v2017.03

udoo: neo: Fix indentation

2017-01-02T16:55:58Z

The standard way is to put ifdef/endif in the very first column. Signed-off-by: Fabio Estevam

udoo_neo: Remove USDHC3 entry

2017-01-02T16:01:35Z

Commit c94981efa20cc58 ("udoo_neo: Remove USDHC3 support") removed the SDHC3 support, but missed to remove the entry from the usdhc_cfg structure, so just remove it. Signed-off-by: Fabio Estevam

udoo_neo: Add Ethernet support

2016-12-16T09:21:29Z

UDOO Neo boards has one FEC port connected to KSZ8091, add support for it. Tested on a UDOO Neo Full with "dhcp zImage" command. Signed-off-by: Breno Lima

udoo_neo: Add PFUZE300 PMIC support

2016-12-16T09:21:29Z

UDOO Neo boards has a PFUZE300 connected to I2C1 bus. Tested on a UDOO Neo Full with "pmic PFUZE3000 dump" command. Signed-off-by: Breno Lima

udoo_neo: Staticize board_string()

2016-12-16T09:20:17Z

Change board_string() function to static because it's being used locally. Signed-off-by: Breno Lima Reviewed-by: Fabio Estevam

udoo_neo: Remove USDHC3 support

2016-12-16T09:09:24Z

It's not necessary to support USDHC3 in U-Boot as it's being used for the WLAN. Signed-off-by: Breno Lima Reviewed-by: Fabio Estevam

mx6sx: Add initial support for UDOO Neo Board

2016-11-29T15:48:20Z

UDOO Neo Board is a development board from Seco that has three models: - UDOO Neo Basic - UDOO Neo Basic Kick Starter - UDOO Neo Extended - UDOO Neo Full All versions are based on the i.MX6 SoloX processor. For more details about the UDOO Neo board, please refer to: http://www.udoo.org/udoo-neo/ This work is based on a previous commit of Francesco Montefoschi : https://github.com/fmntf/u-boot/commit/877b71184a5105e708024f232d36aed574961844 Only tested on the UDOO Neo Full board. Signed-off-by: Breno Lima Reviewed-by: Fabio Estevam

udoo: Add a README file

2016-10-06T07:40:34Z

Add a README file to explain how to build and flash the SD card for Udoo boards. Signed-off-by: Fabio Estevam

treewide: replace #include with

2016-09-23T21:55:42Z

Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap ) Replace all include directives for with . Signed-off-by: Masahiro Yamada [trini: Fixup include/clk.] Signed-off-by: Tom Rini

mx6: ddr: Allow changing REFSEL and REFR fields

2016-09-06T16:22:48Z

Currently MX6 SPL DDR initialization hardcodes the REF_SEL and REFR fields of the MDREF register as 1 and 7, respectively for DDR3 and 0 and 3 for LPDDR2. Looking at the MDREF initialization done via DCD we see that boards do need to initialize these fields differently: $ git grep 0x021b0020 board/ board/bachmann/ot1200/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800 board/ccv/xpress/imximage.cfg:DATA 4 0x021b0020 0x00000800 /* MMDC0_MDREF */ board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x7800 board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qsabreauto/mx6dl.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qsabreauto/mx6qp.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6sabresd/mx6dlsabresd.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6slevk/imximage.cfg:DATA 4 0x021b0020 0x00001800 board/freescale/mx6sxsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00000800 board/freescale/mx6sxsabresd/imximage.cfg:DATA 4 0x021b0020 0x00000800 board/warp/imximage.cfg:DATA 4 0x021b0020 0x00001800 So introduce a mechanism for users to be able to configure REFSEL and REFR fields as needed. Keep all the mx6 SPL users in their current REF_SEL and REFR values, so no functional changes for the existing users. Signed-off-by: Fabio Estevam Reviewed-by: Eric Nelson