u-boot.git/board/warp, branch v2017.09

imx: reorganize IMX code as other SOCs

2017-07-12T08:17:44Z

Change is consistent with other SOCs and it is in preparation for adding SOMs. SOC's related files are moved from cpu/ to mach-imx/. This change is also coherent with the structure in kernel. Signed-off-by: Stefano Babic CC: Fabio Estevam CC: Akshay Bhat CC: Ken Lin CC: Marek Vasut CC: Heiko Schocher CC: "Sébastien Szymanski" CC: Christian Gmeiner CC: Stefan Roese CC: Patrick Bruenn CC: Troy Kisky CC: Nikita Kiryanov CC: Otavio Salvador CC: "Eric Bénard" CC: Jagan Teki CC: Ye Li CC: Peng Fan CC: Adrian Alonso CC: Alison Wang CC: Tim Harvey CC: Martin Donnelly CC: Marcin Niestroj CC: Lukasz Majewski CC: Adam Ford CC: "Albert ARIBAUD (3ADEV)" CC: Boris Brezillon CC: Soeren Moch CC: Richard Hu CC: Wig Cheng CC: Vanessa Maegima CC: Max Krummenacher CC: Stefan Agner CC: Markus Niebel CC: Breno Lima CC: Francesco Montefoschi CC: Jaehoon Chung CC: Scott Wood CC: Joe Hershberger CC: Anatolij Gustschin CC: Simon Glass CC: "Andrew F. Davis" CC: "Łukasz Majewski" CC: Patrice Chotard CC: Nobuhiro Iwamatsu CC: Hans de Goede CC: Masahiro Yamada CC: Stephen Warren CC: Andre Przywara CC: "Álvaro Fernández Rojas" CC: York Sun CC: Xiaoliang Yang CC: Chen-Yu Tsai CC: George McCollister CC: Sven Ebenfeld CC: Filip Brozovic CC: Petr Kulhavy CC: Eric Nelson CC: Bai Ping CC: Anson Huang CC: Sanchayan Maity CC: Lokesh Vutla CC: Patrick Delaunay CC: Gary Bisson CC: Alexander Graf CC: u-boot@lists.denx.de Reviewed-by: Fabio Estevam Reviewed-by: Christian Gmeiner

mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT

2017-07-12T07:44:22Z

CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT is not the correct method to set I/O to 1.8. To boards that does not support vqmmc-supply, use vs18_enable in fsl_esdhc_cfg. If regulator is supported, use fixed 1.8V regulator for vqmmc-supply. Signed-off-by: Peng Fan Cc: Jaehoon Chung Cc: York Sun Cc: Stefano Babic

imx: s/docs\/README.imximage/doc\/README.imximage/g

2016-10-26T14:53:16Z

Fixed typo for doc/README.imximage on respective imximage.cfg files. Cc: Tom Rini Cc: Stefano Babic Cc: Fabio Estevam Acked-by: Peng Fan Signed-off-by: Jagan Teki

warp: Fix RAM size runtime detection

2016-09-06T16:22:48Z

Since commit a13d3757f7df ("warp: Use imx_ddr_size() for calculating the DDR size") warp board no longer boots. The reason for the breakage is that the warp board is using the DDR configuration from mx6slevk. A fundamental difference between warp and mx6slevk is that warp only uses one DDR chip select while mx6slevk uses two. The imx_ddr() function calculates the RAM size in runtime by reading the values of registers MDCTL and MDMISC. So in order to fix this warp boot issue, create a imximage DDR file specific to warp, where the MDCTL register is configured to only activates a single chip select. Reported-by: Breno Lima Signed-off-by: Fabio Estevam Tested-by: Breno Lima

warp: Use imx_ddr_size() for calculating the DDR size

2016-07-28T11:27:20Z

imx_ddr_size() can be used to calculate the DDR size in runtime. By using this function we no longer need to define PHYS_SDRAM_SIZE. Signed-off-by: Fabio Estevam

Use correct spelling of "U-Boot"

2016-02-06T11:00:59Z

Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng Reviewed-by: Heiko Schocher Reviewed-by: Simon Glass Reviewed-by: Minkyu Kang

mx6: remove SYS_SOC from board Kconfig

2015-09-13T08:37:29Z

Remove duplicated SYS_SOC Kconfig entry from board Kconfig, because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Heiko Schocher Cc: Christian Gmeiner Cc: Stefan Roese Cc: Troy Kisky Cc: Nikita Kiryanov Cc: "Eric Bénard" Cc: Fabio Estevam Cc: Tim Harvey Cc: Marek Vasut Cc: Markus Niebel Cc: Otavio Salvador Acked-by: Stefan Roese Acked-by: Marek Vasut Acked-by: Christian Gmeiner Acked-by: Markus Niebel Acked-by: Troy Kisky Acked-by: Igor Grinberg

warp: Add MAX77696 support

2015-07-26T10:12:04Z

Warp has a MAX77696 PMIC connected via I2C1 bus. Add support for it. Signed-off-by: Fabio Estevam

warp: Fix the 'saveenv' command

2015-05-28T10:10:41Z

After the mx6 config consolidation, 'save' command is no longer recognized. Pass the full command name 'saveenv' instead. Signed-off-by: Fabio Estevam

warp: README: Fix typo

2015-05-15T17:21:24Z

Fix the spelling of 'successful'. Signed-off-by: Fabio Estevam