u-boot.git/board/xen, branch master Unnamed repository; edit this file 'description' to name the repository. treewide: Remove empty board_init() function from all boards 2025-07-24T19:30:19+00:00 Sam Protsenko semen.protsenko@linaro.org 2025-07-17T02:44:26+00:00 70a4d1fa1ddb2f5f8f9a27442563f182549abbb5 Commit 86acdce2ba88 ("common: add config for board_init() call") introduced CONFIG_BOARD_INIT option. This option can be disabled for the boards where board_init() function is not needed. Remove empty board_init() calls for all boards where it's possible, and disable CONFIG_BOARD_INIT in all related defconfigs. This cleanup was made semi-automatically using these scripts: [1]. No functional change, but the binary size for the modified boards is reduced a bit. [1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon Tested-by: Bryan Brattlof <bb@ti.com> Acked-by: Peng Fan <peng.fan@nxp.com> #NXP boards 
Commit 86acdce2ba88 ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.

This cleanup was made semi-automatically using these scripts: [1].

No functional change, but the binary size for the modified boards is
reduced a bit.

[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon
Tested-by: Bryan Brattlof <bb@ti.com>
Acked-by: Peng Fan <peng.fan@nxp.com>  #NXP boards
fdt: Swap the signature for board_fdt_blob_setup() 2024-12-18T21:18:59+00:00 Simon Glass sjg@chromium.org 2024-11-02T17:49:42+00:00 fc37a73e667916e15e01e0f9d189da792df2b351 This returns a devicetree and updates a parameter with an error code. Swap it, since this fits better with the way U-Boot normally works. It also (more easily) allows leaving the existing pointer unchanged. No yaks were harmed in this change, but there is a very small code-size reduction. For sifive, the OF_BOARD option must be set for the function to be called, so there is no point in checking it again. Also OF_SEPARATE is defined always. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> [trini: Update total_compute] Signed-off-by: Tom Rini <trini@konsulko.com> 
This returns a devicetree and updates a parameter with an error code.
Swap it, since this fits better with the way U-Boot normally works. It
also (more easily) allows leaving the existing pointer unchanged.

No yaks were harmed in this change, but there is a very small code-size
reduction.

For sifive, the OF_BOARD option must be set for the function to be
called, so there is no point in checking it again. Also OF_SEPARATE is
defined always.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
[trini: Update total_compute]
Signed-off-by: Tom Rini <trini@konsulko.com>
Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet" 2024-05-20T19:35:03+00:00 Tom Rini trini@konsulko.com 2024-05-20T19:35:03+00:00 03de305ec48b0bb28554372abb40ccd46dbe0bf9 As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" 2024-05-19T14:16:36+00:00 Tom Rini trini@konsulko.com 2024-05-19T02:20:43+00:00 d678a59d2d719da9e807495b4b021501f2836ca5 When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
board: xen: Remove <common.h> and add needed includes 2024-05-07T14:00:40+00:00 Tom Rini trini@konsulko.com 2024-05-01T02:43:14+00:00 816055e20dd42134295ab8a7b32f34c3006cc6f0 Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> 
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
xen: xenguest_arm64: map all VIRTIO MMIO region 2024-03-01T23:34:08+00:00 Peng Fan peng.fan@nxp.com 2024-01-26T10:29:38+00:00 15f832a7dc1082f0fff87e07b3752fe8c324ee48 When run `virtio scan` on i.MX95, there is abort when accessing virtio mmio region. The issue is the mmio region is not mapped. So let's map all virtio mmio regions. Signed-off-by: Peng Fan <peng.fan@nxp.com> 
When run `virtio scan` on i.MX95, there is abort when accessing virtio
mmio region. The issue is the mmio region is not mapped. So let's map
all virtio mmio regions.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
board: xen: introduce virtio-blk support 2023-10-11T14:46:23+00:00 Andrii Chepurnyi Andrii_Chepurnyi@epam.com 2023-10-03T08:58:28+00:00 0501c997a0aa647ec6995a6e662b677db037ee5c Added new xenguest_arm64_virtio_defconfig which enables support for virtio-blk using various types of transport like virtio-pci, vrtio-mmio. Currently supported: up to 2 PCI host bridges and 10 MMIO devices. Note: DT parsing code was partly taken from pci-uclass.c Limitation: All memory regions should be below 4GB address space. Signed-off-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com> 
Added new xenguest_arm64_virtio_defconfig which
enables support for virtio-blk using various types
of transport like virtio-pci, vrtio-mmio. Currently
supported: up to 2 PCI host bridges and 10 MMIO devices.
Note: DT parsing code was partly taken from pci-uclass.c
Limitation: All memory regions should be
below 4GB address space.

Signed-off-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
Convert CONFIG_CONS_INDEX et al to Kconfig 2021-12-27T13:41:38+00:00 Tom Rini trini@konsulko.com 2021-12-11T19:55:51+00:00 f76750d1113380462413bad94d7a400af1aa4909 This converts the following to Kconfig: CONFIG_CONS_INDEX CONFIG_DEBUG_UART_CLOCK CONFIG_FSL_TZPC_BP147 CONFIG_GENERIC_ATMEL_MCI CONFIG_IDENT_STRING CONFIG_LIBATA CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_LPC32XX_GPIO CONFIG_MP CONFIG_MPC8XXX_GPIO CONFIG_MTD_PARTITIONS CONFIG_MVGBE CONFIG_MXC_GPIO CONFIG_NR_DRAM_BANKS CONFIG_OF_BOARD_SETUP CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_OF_SYSTEM_SETUP CONFIG_PREBOOT CONFIG_ROCKCHIP_SERIAL CONFIG_RTC_ENABLE_32KHZ_OUTPUT CONFIG_RTC_MV CONFIG_SCSI_AHCI CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_SPEED CONFIG_SOFT_SPI CONFIG_SPI_FLASH_EON CONFIG_SPI_FLASH_MACRONIX CONFIG_SPI_FLASH_MTD CONFIG_SPI_FLASH_SPANSION CONFIG_SPI_FLASH_SST CONFIG_SPI_FLASH_STMICRO CONFIG_SUPPORT_RAW_INITRD CONFIG_SYS_ARCH_TIMER CONFIG_SYS_BOARD CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE CONFIG_SYS_DCACHE_OFF CONFIG_SYS_FDT_SAVE_ADDRESS CONFIG_SYS_FLASH_CFI CONFIG_SYS_FSL_ERRATUM_ESDHC135 CONFIG_SYS_HAS_SERDES CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_LITTLE_ENDIAN CONFIG_SYS_LOAD_ADDR CONFIG_SYS_MMCSD_FS_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR CONFIG_SYS_NS16550 CONFIG_SYS_PLLFIN CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_TIMER_SYS_TICK_CH CONFIG_USB_EHCI_FSL CONFIG_U_QE CONFIG_VERSION_VARIABLE Signed-off-by: Tom Rini <trini@konsulko.com> 
This converts the following to Kconfig:
   CONFIG_CONS_INDEX
   CONFIG_DEBUG_UART_CLOCK
   CONFIG_FSL_TZPC_BP147
   CONFIG_GENERIC_ATMEL_MCI
   CONFIG_IDENT_STRING
   CONFIG_LIBATA
   CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE
   CONFIG_LPC32XX_GPIO
   CONFIG_MP
   CONFIG_MPC8XXX_GPIO
   CONFIG_MTD_PARTITIONS
   CONFIG_MVGBE
   CONFIG_MXC_GPIO
   CONFIG_NR_DRAM_BANKS
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_PREBOOT
   CONFIG_ROCKCHIP_SERIAL
   CONFIG_RTC_ENABLE_32KHZ_OUTPUT
   CONFIG_RTC_MV
   CONFIG_SCSI_AHCI
   CONFIG_SF_DEFAULT_BUS
   CONFIG_SF_DEFAULT_CS
   CONFIG_SF_DEFAULT_SPEED
   CONFIG_SOFT_SPI
   CONFIG_SPI_FLASH_EON
   CONFIG_SPI_FLASH_MACRONIX
   CONFIG_SPI_FLASH_MTD
   CONFIG_SPI_FLASH_SPANSION
   CONFIG_SPI_FLASH_SST
   CONFIG_SPI_FLASH_STMICRO
   CONFIG_SUPPORT_RAW_INITRD
   CONFIG_SYS_ARCH_TIMER
   CONFIG_SYS_BOARD
   CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
   CONFIG_SYS_DCACHE_OFF
   CONFIG_SYS_FDT_SAVE_ADDRESS
   CONFIG_SYS_FLASH_CFI
   CONFIG_SYS_FSL_ERRATUM_ESDHC135
   CONFIG_SYS_HAS_SERDES
   CONFIG_SYS_L2CACHE_OFF
   CONFIG_SYS_LITTLE_ENDIAN
   CONFIG_SYS_LOAD_ADDR
   CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
   CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
   CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
   CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
   CONFIG_SYS_NS16550
   CONFIG_SYS_PLLFIN
   CONFIG_SYS_SPI_U_BOOT_OFFS
   CONFIG_TIMER_SYS_TICK_CH
   CONFIG_USB_EHCI_FSL
   CONFIG_U_QE
   CONFIG_VERSION_VARIABLE

Signed-off-by: Tom Rini <trini@konsulko.com>
sandbox: Remove OF_HOSTFILE 2021-10-27T20:38:26+00:00 Ilias Apalodimas ilias.apalodimas@linaro.org 2021-10-26T06:12:33+00:00 e7fb789612e39653f9f20ad08ad40896c7f61742 OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> 
OF_HOSTFILE is used on sandbox configs only.  Although it's pretty
unique and not causing any confusions,  we are better of having simpler
config options for the DTB.

So let's replace that with the existing OF_BOARD.  U-Boot would then
have only three config options for the DTB origin.
- OF_SEPARATE, build separately from U-Boot
- OF_BOARD, board specific way of providing the DTB
- OF_EMBED embedded in the u-boot binary(should not be used in production

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
WS cleanup: remove trailing empty lines 2021-09-30T12:08:56+00:00 Wolfgang Denk wd@denx.de 2021-09-27T15:42:36+00:00 66356b4c06c934021f6cb58d93877427162b369f Signed-off-by: Wolfgang Denk <wd@denx.de> 
Signed-off-by: Wolfgang Denk <wd@denx.de>