u-boot.git/board/xes, branch v2012.10

doc: cleanup - move board READMEs into respective board directories

2012-07-29T13:42:02+00:00

Also drop a few files referring to no longer / not yet supported
boards.

Signed-off-by: Wolfgang Denk 
Cc: Prafulla Wadaskar 
Cc: Stefan Roese 
Cc: Kim Phillips 
Cc: Andy Fleming 
Cc: Jason Jin 
Cc: Stefano Babic 
Cc: Daniel Schwierzeck 
Acked-by: Stefano Babic 
Acked-by: Daniel Schwierzeck

punt unused clean/distclean targets

2011-10-15T20:20:36+00:00

The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used.  Punt them all.

MAKEALL didn't report any errors related to this that I could see.

Signed-off-by: Mike Frysinger

powerpc/mpc85xx: Display a warning for unsupported DDR data rates

2011-07-11T18:24:20+00:00

If DDR initialziation uses a speed table and the speed is not matched,
print a warning message instead of silently ignoring.

Signed-off-by: York Sun 
Signed-off-by: Kumar Gala

Fix incorrect use of getenv() before relocation

2011-05-12T17:48:42+00:00

A large number of boards incorrectly used getenv() in their board init
code running before relocation.  In some cases this caused U-Boot to
hang when certain environment variables grew too long.
Fix the code to use getenv_r().

Signed-off-by: Wolfgang Denk 
Cc: Stefan Roese 
Cc: The LEOX team 
Cc: Michael Schwingen 
Cc: Georg Schardt 
Cc: Werner Pfister 
Cc: Dirk Eibach 
Cc: Peter De Schrijver 
Cc: John Zhan 
Cc: Rishi Bhattacharya 
Cc: Peter Tyser

powerpc/8xxx: Refactor fsl_ddr_get_spd into common code from board

2011-04-04T14:24:41+00:00

Move fsl_ddr_get_spd into common mpc8xxx/ddr/main.c as most boards
pretty much do the same thing.  The only variations are in how many
controllers or DIMMs per controller exist.  To make this work we
standardize on the names of the SPD_EEPROM_ADDRESS defines based on the
use case of the board.

We allow boards to override get_spd to either do board specific fixups
to the SPD data or deal with any unique behavior of how the SPD eeproms
are wired up.

Signed-off-by: Kumar Gala

powerpc/8xxx: Replace fsl_ddr_get_mem_data_rate with get_ddr_freq()

2011-04-04T14:24:40+00:00

Every 85xx board implements fsl_ddr_get_mem_data_rate via get_ddr_freq()
and every 86xx board uses get_bus_freq().  If implement get_ddr_freq()
as a static inline to call get_bus_freq() we can remove
fsl_ddr_get_mem_data_rate altogether and just call get_ddr_freq()
directly.

Signed-off-by: Kumar Gala

powerpc: Move cpu specific lmb reserve to arch_lmb_reserve

2011-04-04T14:24:40+00:00

We've been utilizing board_lmb_reserve to reserve the boot page for MP
systems.  We can just move this into arch_lmb_reserve for 85xx & 86xx
systems rather than duplicating in each board port.

Signed-off-by: Kumar Gala

rename _end to __bss_end__

2011-03-27T17:18:37+00:00

Currently, _end is used for end of BSS section.  We want _end to mean
end of u-boot image, so we rename _end to __bss_end__ first.

Signed-off-by: Po-Yu Chuang

Replace "FLASH" strings with "Flash" or "flash"

2011-01-18T23:02:37+00:00

There's no compelling reason to have the output on bootup or the
"flinfo" command print "flash" in uppercase, so use the proper case
where appropriate.

Signed-off-by: Peter Tyser

powerpc/8xxx: Rework XES boards pci_init_board to use common FSL PCIe code

2011-01-14T07:32:20+00:00

Remove duplicated code in MPC8xxx XES boards and utilize the common
fsl_pcie_init_board().

Signed-off-by: Kumar Gala 
CC: Peter Tyser