u-boot.git/board/xilinx, branch v2012.07

microblaze: Wire up LL_TEMAC driver initialization

2012-04-04T14:36:44Z

Initialize ll_temac driver. Reported-by: Michal Simek Signed-off-by: Stephan Linz

microblaze: Add faked LL_TEMAC driver configuration

2012-04-04T14:36:38Z

Expand the specific configuration for the microblaze-generic board in xparameters.h with a faked setup to enable the LL_TEMAC driver. Note: From now the microblaze-generic board is no longer a valid board configuration for a real piece of hardware. Rather than, we use the file config.mk and xparameters.h as a faked board configuration to force the compilation of all potential driver code for Microblaze systems. Signed-off-by: Stephan Linz

microblaze: Wire up axi_ethernet driver initialization

2011-10-24T05:50:21Z

Initialize axi_ethernet driver. Signed-off-by: Michal Simek

net: xilinx_enet: drop unused !NET_MULTI driver

2011-10-23T21:34:20Z

This driver doesn't support the NET_MULTI framework, and I can't find any boards/configs/files that reference this subdir, so punt it all. Signed-off-by: Mike Frysinger

net: emaclite: Move RX/TX ping pong initialization to

2011-10-23T21:32:44Z

Init RX/TX ping pong directly from board not in the driver. Signed-off-by: Michal Simek

punt unused clean/distclean targets

2011-10-15T20:20:36Z

The top level Makefile does not do any recursion into subdirs when cleaning, so these clean/distclean targets in random arch/board dirs never get used. Punt them all. MAKEALL didn't report any errors related to this that I could see. Signed-off-by: Mike Frysinger

Handle most LDSCRIPT setting centrally

2011-04-29T22:59:47Z

Currently, some linker scripts are found by common code in config.mk. Some are found using CONFIG_SYS_LDSCRIPT, but the code for that is sometimes in arch config.mk and sometimes in board config.mk. Some are found using an arch-specific rule for looking in CPUDIR, etc. Further, the powerpc config.mk rule relied on CONFIG_NAND_SPL when it really wanted CONFIG_NAND_U_BOOT -- which covered up the fact that not all NAND_U_BOOT builds actually wanted CPUDIR/u-boot-nand.lds. Replace all of this -- except for a handful of boards that are actually selecting a linker script in a unique way -- with centralized ldscript finding. If board code specifies LDSCRIPT, that will be used. Otherwise, if CONFIG_SYS_LDSCRIPT is specified, that will be used. If neither of these are specified, then the central config.mk will check for the existence of the following, in order: $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds $(TOPDIR)/$(CPUDIR)/u-boot.lds Some boards (sc3, cm5200, munices) provided their own u-boot.lds that were dead code, because they were overridden by a CPUDIR u-boot.lds under the old powerpc rules. These boards' own u-boot.lds have bitrotted and no longer work -- these lds files have been removed. Signed-off-by: Scott Wood Tested-by: Graeme Russ

xilinx-ppc4xx-generic: Fix Makefile to work with MAKEALL

2011-01-11T09:58:55Z

config.mk only mkdirs $(obj), but we have objects shared with other boards located on other dirs. This patch mkdirs the needed dirs for the xlnx-generic boards. Signed-off-by: Stefan Roese

xilinx-ppc4xx-generic: Use common u-boot.lds

2010-12-17T08:44:40Z

Use common ppc4xx linker script for xilinx ppc440 and ppc405 related boards. Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Stefan Roese

do_reset: unify duplicate prototypes

2010-11-28T20:47:24Z

The duplication of the do_reset prototype has gotten out of hand, and they're not all in sync. Unify them all in command.h. Signed-off-by: Mike Frysinger