u-boot.git/board/xilinx, branch v2015.10

zynqmp: usb: Add usb dwc3 driver support for zynqmp

2015-08-19T09:27:30Z

Added usb dwc3 driver support for zynqmp this also supports the DFU and LTHOR to download the linux images on to RAM and cen be booted from those linux images. Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek

board: Xilinx: zynqmp: Define checkboard() function

2015-08-19T09:26:59Z

Define checkboard() function for zynqMP Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek

of: clean up OF_CONTROL ifdef conditionals

2015-08-18T17:46:05Z

We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada Reviewed-by: Tom Rini Reviewed-by: Simon Glass Acked-by: Linus Walleij

zynq: Fix typo in Makefile about custom ps7_init file

2015-07-28T09:56:28Z

Trivial fix. Signed-off-by: Michal Simek

zynqmp: Show EL level where U-Boot runs

2015-07-28T09:56:27Z

Add one more print to make clear which EL level U-Boot runs. Signed-off-by: Michal Simek

ARM: zynqmp: Wire up SATA for the board

2015-07-28T09:56:27Z

Enable SATA for the ZynqMP targets. Signed-off-by: Michal Simek

ARM: zynqmp: Wire up ethernet controllers

2015-07-28T09:56:27Z

Wire up ethernet controllers and enable MII and BOOTP options. Signed-off-by: Michal Simek

zynqmp: Define ep config for ZynqMP

2015-07-28T09:56:19Z

Define a new config "zynqmp_ep" for ZynqMP instead of xilinx_zynqmp. This defconfig supports all emulation platforms of ZynqMP. Also renamed TARGET_XILINX_ZYNQMP to ARCH_ZYNQMP. Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek

zynqmp: Kconfig: Move zynqmp Kconfig

2015-07-28T09:56:19Z

Move the zynqmp Kconfig from board to arch as there may be different boards under same architecture. Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek

ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70x

2015-05-25T08:52:36Z

Due to licensing issues, the files ps7_init.c/h are not able to be distributed with U-Boot source code. Recent Xilinx tools also provide the GPL variants (ps7_init_gpl.c/h), compatible with U-Boot license. Prior to this commit, we had to copy ps7_init files into board/xilinx/zynq/ before the compile. To be more user-friendly, let's include ps7_init_gpl.c/h for Zedboard, MicroZed, ZC702, ZC706. These init code have been taken from the hwplatform_templates directory of Xilinx SDK 2014.4. You can still use customized ps7_init_gpl.c/h by enabling CONFIG_ZYNQ_CUSTOM_INIT. The recommended directory for storing them is now board/xilinx/zynq/custom_hw_platform, but board/xilinx/zynq is still supported for backward compatibility. The latter emits a warning message to prompt users to gradually switch to the new directory. Signed-off-by: Masahiro Yamada Acked-by: Sören Brinkmann Acked-by: Joe Hershberger Signed-off-by: Michal Simek