u-boot.git/board, branch v2010.03 Unnamed repository; edit this file 'description' to name the repository. mpc86xx: set the DDR BATs after calculating true DDR size 2010-03-30T15:50:22+00:00 Timur Tabi timur@freescale.com 2010-03-29T17:51:07+00:00 9ff32d8ccf0e23b5577c25610f001af8d761b4a2 After determining how much DDR is actually in the system, set DBAT0 and IBAT0 accordingly. This ensures that the CPU won't attempt to access (via speculation) addresses outside of actual memory. On 86xx systems, DBAT0 and IBAT0 (the BATs for DDR) are initialized to 2GB and kept that way. If the system has less than 2GB of memory (typical for an MPC8610 HPCD), the CPU may attempt to access this memory during speculation. The zlib code is notorious for generating such memory reads, and indeed on the MPC8610, uncompressing the Linux kernel causes a machine check (without this patch). Currently we are limited to power of two sized DDR since we only use a single bat. If a non-power of two size is used that is less than CONFIG_MAX_MEM_MAPPED u-boot will crash. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 
After determining how much DDR is actually in the system, set DBAT0 and
IBAT0 accordingly.  This ensures that the CPU won't attempt to access
(via speculation) addresses outside of actual memory.

On 86xx systems, DBAT0 and IBAT0 (the BATs for DDR) are initialized to 2GB
and kept that way.  If the system has less than 2GB of memory (typical for
an MPC8610 HPCD), the CPU may attempt to access this memory during
speculation.  The zlib code is notorious for generating such memory reads,
and indeed on the MPC8610, uncompressing the Linux kernel causes a machine
check (without this patch).

Currently we are limited to power of two sized DDR since we only use a
single bat.  If a non-power of two size is used that is less than
CONFIG_MAX_MEM_MAPPED u-boot will crash.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
ml300: remove support for broken, orphaned board 2010-03-27T23:18:58+00:00 Wolfgang Denk wd@denx.de 2010-03-24T11:19:19+00:00 a574cff121b1479c8e962b7a2a29310020387260 The ml300 board has a number of issues, but nobody cares about this long-orphaned board any more. Remove it. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Michal Simek <monstr@monstr.eu> 
The ml300 board has a number of issues, but nobody cares about this
long-orphaned board any more.  Remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Michal Simek <monstr@monstr.eu>
mod change 755 => 644 for multiple files 2010-03-21T21:22:53+00:00 Thomas Weber swirl@gmx.li 2010-03-13T22:14:45+00:00 5647f78d04174b0b99857d2a7cbf25141bd14a45 I executed 'find . -name "*.[chS]" -perm 755 -exec chmod 644 {} \;' Signed-off-by: Thomas Weber <swirl@gmx.li> Add some more: neither Makefile nor config.mk need execute permissions. Signed-off-by: Wolfgang Denk <wd@denx.de> 
I executed 'find . -name "*.[chS]" -perm 755 -exec chmod 644 {} \;'

Signed-off-by: Thomas Weber <swirl@gmx.li>
Add some more: neither Makefile nor config.mk need execute permissions.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Prepare v2010.03-rc1 2010-03-12T22:06:04+00:00 Wolfgang Denk wd@denx.de 2010-03-12T22:06:04+00:00 93910edb595a88d394da3eb2cf5148096155dfe9 Coding style cleanup, update CHANGELOG. Signed-off-by: Wolfgang Denk <wd@denx.de> 
Coding style cleanup, update CHANGELOG.

Signed-off-by: Wolfgang Denk <wd@denx.de>
mpc82xx: Remove SL8245 board and the now orpahned sk98lin network driver. 2010-03-12T08:49:23+00:00 Detlev Zundel dzu@denx.de 2010-03-08T13:02:57+00:00 9c9cbe78dcb0afad081670cb1bdc82d227095cae This code has compile problems and the company does not even exist any more. So we take the liberty to drop support for it. Signed-off-by: Detlev Zundel <dzu@denx.de> CC: Wolfgang Denk <wd@denx.de> CC: Ben Warren <biggerbadderben@gmail.com> 
This code has compile problems and the company does not even exist any
more.  So we take the liberty to drop support for it.

Signed-off-by: Detlev Zundel <dzu@denx.de>
CC: Wolfgang Denk <wd@denx.de>
CC: Ben Warren <biggerbadderben@gmail.com>
TQM8xx: add device tree support for TQM8xx based boards. 2010-03-11T23:04:52+00:00 Heiko Schocher hs@denx.de 2010-02-09T14:50:21+00:00 6ed3b9d44c359bc829e9acd0a55fcd1c3e82b6ae Also use hwconfig to configure whether the board has a FEC or not. We then can adjust the DTS to tell Linux if there is a FEC present. syntax: hwconfig=fec:on if hardware has a FEC hwconfig=fec:off if hardware has no FEC Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de> 
Also use hwconfig to configure whether the board has a FEC or not.
We then can adjust the DTS to tell Linux if there is a FEC present.

syntax:

hwconfig=fec:on   if hardware has a  FEC
hwconfig=fec:off  if hardware has no FEC

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
AT91: Update otc570 board to new SoC access 2010-03-07T18:36:37+00:00 Daniel Gorsulowski Daniel.Gorsulowski@esd.eu 2010-02-11T13:57:04+00:00 6258b04e9a41ee60f21547358a58fbcb9087735d * convert otc570 board to use c stucture SoC access * change gpio access to at91_gpio syntax Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu> 
* convert otc570 board to use c stucture SoC access
* change gpio access to at91_gpio syntax

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
arm: kirkwood: suen3: fixed build warning 2010-03-07T18:36:36+00:00 Prafulla Wadaskar prafulla@marvell.com 2010-03-03T09:57:37+00:00 637833c2d669f9a370706e275e7103454c3c83ec This patch fixes following build warning Invalid Kwbimage command Type - valid names are: BOOT_FROM, NAND_ECC_MODE, NAND_PAGE_SIZE, SATA_PIO_MODE, DDR_INIT_DELAY, DATA, , spi, nand, sata, pex, uart Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> 
This patch fixes following build warning

Invalid Kwbimage command Type - valid names are: BOOT_FROM, NAND_ECC_MODE, NAND_PAGE_SIZE, SATA_PIO_MODE, DDR_INIT_DELAY, DATA, , spi, nand, sata, pex, uart

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
MX51: removed warnings for the mx51evk 2010-03-07T18:36:36+00:00 Stefano Babic sbabic@denx.de 2010-03-05T16:54:37+00:00 e4d34492017c95e4041ea0c581e1ab8d1d49381b The patch removes warnings at compile time and provides some cleanup code: - Removed comment on NAND (not yet supported) from lowlevel_init.S - Removed NFMS bit definition from imx-regs.h The bit is only related to MX.25/35 and can lead to confusion - Moved is_soc_rev() to soc specific code (removed from mx51evk.c) Signed-off-by: Stefano Babic <sbabic@denx.de> 
The patch removes warnings at compile time and provides
some cleanup code:
- Removed comment on NAND (not yet supported) from lowlevel_init.S
- Removed NFMS bit definition from imx-regs.h
  The bit is only related to MX.25/35 and can lead to confusion
- Moved is_soc_rev() to soc specific code (removed from mx51evk.c)

Signed-off-by: Stefano Babic <sbabic@denx.de>
SPEAr : Supporting new mach ids for spear310 and spear320 2010-03-07T18:36:36+00:00 Vipin Kumar vipin.kumar@st.com 2010-03-02T05:16:52+00:00 9d69e33d8d0f112fe3a089101d023e87431684d1 Supporting new machine ids for SoCs spear310 and spear320 include/asm-arm/mach-types.h has to be updated before applying this patch for build to work Signed-off-by: Vipin Kumar <vipin.kumar@st.com> 
Supporting new machine ids for SoCs spear310 and spear320

include/asm-arm/mach-types.h has to be updated before applying
this patch for build to work

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>