u-boot.git/board, branch v2010.09-rc2Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/board?h=v2010.09-rc22010-09-19T10:31:02Zsocrates: adjust TEXT_BASE to increase U-Boot image size2010-09-19T10:31:02ZWolfgang Denkwd@denx.de2010-09-10T21:47:00Zurn:sha1:3adfd1143bd55608fa9ec81f98999d478c9313ba
We need more room for the U-Boot image.
Shift TEXT_BASE as needed.
Signed-off-by: Wolfgang Denk <wd@denx.de>
x86: Remove Unmaintained Boards2010-09-12T21:20:02ZGraeme Russgraeme.russ@gmail.com2010-08-22T06:26:00Zurn:sha1:215e1cb33ca676c62d96dfd3aa1053b7a92b7997
The SC520 CDP boards originally implemented by Daniel Engström are now
very broken. Attempts to contact Daniel via the email address on the
copyright notice have failed. Remove these boards from mainline
Prepare v2010.09-rc12010-09-09T22:16:19ZWolfgang Denkwd@denx.de2010-09-09T22:16:19Zurn:sha1:2d941de9d5c7ba00dc19787dfa0aac2949fd00fb
Coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Merge branch 'master' of git://git.denx.de/u-boot-ti2010-09-09T17:55:02ZWolfgang Denkwd@denx.de2010-09-09T17:55:02Zurn:sha1:a78ded13111dde555ed5de99cff10f41ae674cb1ARMV7: Fix pad mux for Panda LEDs2010-09-08T18:51:51ZRicardo Salveti de Araujoricardo.salveti@canonical.com2010-09-07T23:17:52Zurn:sha1:6696ac19adb160b86aaccc38d1d6818606a44f97
Correctly set PAD1_FREF_CLK4_REQ and PAD0_FREF_CLK4_OUT to enable and
activate both LEDs while setting pad mux.
Since this increases the line length, this patch also adjusts the white
space in this section of code to allign the pad mux signal description
comments.
Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
ARMV7: OMAP: Overo: Autodetect presence/absence of transceiver on mmc22010-09-08T18:51:45ZSteve Sakomansteve@sakoman.com2010-08-24T17:37:29Zurn:sha1:a06e1629f4f53db7d1b9fefec6dfabf6438b2d55
An upcoming version of Overo uses a Wifi/BT module with 1.8V signaling,
eliminating the need for an external transceiver to handle the level
shifting. This patch detects whether an external transceiver is present
and adjusts the pinmux settings as appropriate.
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
ARMV7: OMAP3: Add support for Beagle xM2010-09-08T18:51:40ZSteve Sakomansteve@sakoman.com2010-08-20T03:56:11Zurn:sha1:08cbba2abf2d581d2431c982d21be1cbf055da78
This patch adds support for the Beagle xM. It uses the board ID
GPIO bits to recognize this revision and perform appropriate setup.
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
ARMV7: OMAP: Configure Overo's second network chip2010-09-08T18:50:47ZSteve Sakomansteve@sakoman.com2010-08-13T04:07:02Zurn:sha1:ba9a11e4ea27d43bfc3d9f1787117fe4826b3ce7
Confiures GPMC timings for both chips and also configures pinmux
for GPIO_65, which is used as the interrupt signal for the second chip
Signed-off-by: Scott Ellis <scott@jumpnowtek.com>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
ARMV7: OMAP: Add detection and support for Beagle C4 revision2010-09-08T18:50:42ZSteve Sakomansteve@sakoman.com2010-08-12T22:17:37Zurn:sha1:06b95bd50d5a3a09c21271fcf54d2cb849cc453c
This patch enhances the revision detection function and adds
support for the C4 revision. The board revision is printed
and approriate revision specific setup is done automatically.
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
ARMV7: OMAP: Add board revision detection for Overo2010-09-08T18:50:38ZSteve Sakomansteve@sakoman.com2010-08-12T22:13:02Zurn:sha1:c2d5b341206f44c13f4de3c4bb80916d085dfdea
The latest Overo COM modules encode their revision number on
GPIOs 115, 113, and 112. All boards to date have no pullups on these pins
and hence appear as revision 0.
This patch reads and prints the revision information.
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>