u-boot.git/board, branch v2016.03 Unnamed repository; edit this file 'description' to name the repository. mx6slevk: Fix the power up of the Ethernet PHY 2016-03-13T13:50:02+00:00 Fabio Estevam fabio.estevam@nxp.com 2016-03-11T13:50:22+00:00 ae765f3a8243faa39d4a32ba2baede638e40c768 GPIO4_21 is the LAN8720 power pin, not the LAN8720 reset pin. Fix that, so that we can have Ethernet functional again. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> 
GPIO4_21 is the LAN8720 power pin, not the LAN8720 reset pin.

Fix that, so that we can have Ethernet functional again.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
board: tbs2910: Fix eMMC BOOTCFG value 2016-03-02T13:51:05+00:00 Soeren Moch smoch@web.de 2016-02-09T15:53:27+00:00 b112b007162f5d7d523b135b413a37ced15793f9 Fix the BOOTCFG value for eMMC in the same way as commit 214c3f0f9921250eb336c7effadcc16158ea9df5 [imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failure] did for sabresd. Signed-off-by: Soeren Moch <smoch@web.de> 
Fix the BOOTCFG value for eMMC in the same way as commit
  214c3f0f9921250eb336c7effadcc16158ea9df5
  [imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failure]
did for sabresd.

Signed-off-by: Soeren Moch <smoch@web.de>
mx6qarm2: Update maintainer's emails 2016-03-02T13:49:13+00:00 Fabio Estevam fabio.estevam@nxp.com 2016-02-22T17:52:55+00:00 9feec162af89fac56dfec2fc3a5de13c19a5f9ae Use the new NXP emails. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> 
Use the new NXP emails.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
MAINTAINERS: Update Peng Fan's email address 2016-03-02T13:48:52+00:00 Fabio Estevam fabio.estevam@nxp.com 2016-02-21T12:57:23+00:00 047cc75df6f5190c30b7813aace2d8a333ab5edf Use Peng Fan's new NXP email address in MAINTAINERS files. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> 
Use Peng Fan's new NXP email address in MAINTAINERS files.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
sniper: Various minor cleanups, missing Kconfig configs and reorganisation 2016-02-29T19:49:37+00:00 Paul Kocialkowski contact@paulk.fr 2016-02-26T12:18:47+00:00 23a004a63f617d565a9f714873fe60f31c9c548b This introduces some minor cleanups, regarding aspects such as board name, code and headers organization as well as deprecated and missing config options. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com> 
This introduces some minor cleanups, regarding aspects such as board name, code
and headers organization as well as deprecated and missing config options.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-02-24T23:44:15+00:00 Tom Rini trini@konsulko.com 2016-02-24T19:25:54+00:00 e1417c7b66f4e0051a3aa242f655e85c1c96eef2 






rpi: set board serial number in environment
2016-02-24T23:44:12+00:00

Lubomir Rintel
lkundrak@v3.sk

2016-02-22T21:06:47+00:00

757cd149b9c6928734fab0b831a7624168a0b71c

Gets propagated into the device tree and then into /proc/cpuinfo where
users often expect it.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>





Gets propagated into the device tree and then into /proc/cpuinfo where
users often expect it.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>







arm: am437x: cm-t43: set MPU and CORE voltages on boot
2016-02-24T23:44:09+00:00

Nikita Kiryanov
nikita@compulab.co.il

2016-02-19T17:19:49+00:00

43e568c4ae9a35e2458737c7d995b183e21b8a6f

During boot, U-Boot raises the CPU frequency but the CORE and MPU regulators
are not updated. This is not a problem in cold boot since the default values
that the pmic outputs are correct, but if Linux were to switch the module to a
low power OPP, the new voltage values will be retained after a reboot and the
module will likely hang once U-Boot raises the CPU frequency back up.

Set both CORE and MPU regulators to to 1.1V on boot.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>





During boot, U-Boot raises the CPU frequency but the CORE and MPU regulators
are not updated. This is not a problem in cold boot since the default values
that the pmic outputs are correct, but if Linux were to switch the module to a
low power OPP, the new voltage values will be retained after a reboot and the
module will likely hang once U-Boot raises the CPU frequency back up.

Set both CORE and MPU regulators to to 1.1V on boot.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>







arm: am437x: cm-t43: get rid of enable_vtt_regulator()
2016-02-24T23:44:08+00:00

Nikita Kiryanov
nikita@compulab.co.il

2016-02-19T17:19:48+00:00

e038e2a89b213640143d6ab1bbf73b134292e4dc

CM-T43 does not have a vtt regulator. Remove the function that's supposed
to enable it.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>





CM-T43 does not have a vtt regulator. Remove the function that's supposed
to enable it.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>







arm: am437x: cm-t43: set tps fseal bit
2016-02-24T23:44:08+00:00

Nikita Kiryanov
nikita@compulab.co.il

2016-02-19T17:19:47+00:00

dccaaaeb990828573dfa242dfc6c29851d38e32c

Set TPS65218 FSEAL bit to 1 so that RTC could be powered using on-board
3V battery. This is necessary so that time and date will survive reboots and
power offs.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>





Set TPS65218 FSEAL bit to 1 so that RTC could be powered using on-board
3V battery. This is necessary so that time and date will survive reboots and
power offs.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>