u-boot.git/board, branch v2017.09-rc1

ti: Default to ENV_IS_IN_FAT if MMC_OMAP_HS

2017-07-31T16:21:25Z

When we have MMC available we assume that we want to put the env as a file on FAT. Cc: Lokesh Vutla Signed-off-by: Tom Rini

x86: dfi-bt700: Add xHCI USB support

2017-07-30T02:30:25Z

Change from EHCI to xHCI on the DFI BayTrail SoM. The xHCI USB hub is connected to an GPIO on the DFI BayTrail SoM. For correct operation, it needs to get reset upon power-up. Otherwise it may happen that the hub is not detected after a software reboot. This patch also configures this GPIO in the dts for correct operation. Signed-off-by: Stefan Roese Cc: Simon Glass Reviewed-by: Bin Meng

x86: conga-qeval20-qa3-e3845: Select CONFIG_BOARD_LATE_INIT

2017-07-30T02:30:25Z

This config option is needed on the congatec x86 BayTrail board, as otherwise the USB hub will not get initialized correctly. This patch selects this Kconfig option again. Signed-off-by: Stefan Roese Cc: Simon Glass Reviewed-by: Bin Meng

x86: Add Intel Edison board files

2017-07-30T02:30:25Z

Add Intel Edison board which is using U-Boot. The patch is based on work done by the following people (in alphabetical order): Aiden Park Dukjoon Jeon eric.park Fabien Chereau Felipe Balbi Scott D Phillips Sebastien Colleur Steve Sakoman Vincent Tinelli In case we're building for Intel Edison, we must have 4096 bytes of zeroes in the beginning on u-boot.bin. This is done in board/intel/edison/config.mk. First run sets hardware_id environment variable which is read from System Controller Unit (SCU). Serial number (serial# environment variable) is generated based on eMMC CID. MAC address on USB network interface is unique to the board but kept the same all over the time. Set mac address from U-Boot using following scheme: OUI = 02:00:86 next 3 bytes of MAC address set from eMMC serial number This allows to have a unique mac address across reboot and flashing. Signed-off-by: Vincent Tinelli Signed-off-by: Felipe Balbi Signed-off-by: Andy Shevchenko Reviewed-by: Bin Meng Reviewed-by: Simon Glass [bmeng: Add MAINTAINERS file for Intel Edison board] Signed-off-by: Bin Meng

dm: power: Convert as3722 to driver model

2017-07-28T18:02:47Z

Convert this PMIC driver to driver model and fix up other users. The regulator and GPIO functions are now handled by separate drivers. Update nyan-big to work correct. Three boards will need to be updated by the maintainers: apalis-tk1, cei-tk1-som. Also the TODO in the code re as3722_sd_set_voltage() needs to be completed. Signed-off-by: Simon Glass Reviewed-by: Lukasz Majewski Tested-by: Marcel Ziswiler Tested-on: Jetson-TK1 Tested-by: Stephen Warren

rockchip: puma-rk3399: remove duplicate code (merge artifact)

2017-07-27T12:59:04Z

A few lines (defines and declarations) had been duplicated when the puma-rk3399 board was initially merged. This removes the duplicates and changes the style to use local constants instead of pasted literals. Signed-off-by: Kever Yang [fixed up commit-message & converted to use 'const u32':] Signed-off-by: Philipp Tomsich

ram: stm32: migrate fmc defines in driver file

2017-07-26T15:29:07Z

Migrate all FMC defines from arch/arm/include/asm/arch-stm32f7/fmc.h to drivers/ram/stm32_sdram.c This will avoid to add an additionnal arch-stm32xx/fmc.h file when a new stm32 family soc will be introduced. Signed-off-by: Patrice Chotard Reviewed-by: Vikas Manocha Reviewed-by: Simon Glass

serial: stm32x7: migrate serial struct to driver

2017-07-26T15:26:54Z

This allow to remove include/dm/platform_data/serial_stm32x7.h which was included in the past by stm32x7 driver and by stm32f746-disco.c board file. Since patch 42bf5e7c27 "serial: stm32f7: add device tree support" this file is no more needed in board file. Signed-off-by: Patrice Chotard Acked-by: Vikas MANOCHA

board: ti: x15: Add support for beagle_X15 revC

2017-07-26T15:26:49Z

BeagleBoard X15 revC board is similar to X15 revB1 except with a SR2.0 where revB1 uses a SR1.1. Add board detection support for revC. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini

board: ti: am57xx: Fix detection of board version

2017-07-26T15:26:49Z

board_is*("rev", board_ti_get_rev()) uses strncmp() for revison detection and assumes it is success if return value is <= 0. This will fail in case of multiple versions, as revb will be true for board_is_*revb() and board_is_*reva(). Fix it by looking for exact match of the string. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini