u-boot.git/board, branch v2018.01-rc3

Merge branch 'master' of git://git.denx.de/u-boot-rockchip

2018-01-01T14:04:35Z

ARM: omap3: evm: Refactor 'board_eth_init'

2018-01-01T14:04:19Z

This commit clears 'ethaddr' before calling 'smc911x_initialize' to allow the SROM MAC address to be assigned properly. Signed-off-by: Derald D. Woods

rockchip: rk3399-puma: reduce env size to 8kiB

2018-01-01T13:45:37Z

This commit changes the size of the enviroment (for the RK3399-Q7) to 8kiB for all possible locations of the environment (i.e. even when the environment is saved to SD card). With the default of 32kiB, the environment overwrites the SPL stage which lives at 16kiB. Signed-off-by: Jakob Unterwurzacher Acked-by: Philipp Tomsich Reviewed-by: Philipp Tomsich Tested-by: Philipp Tomsich [Reworked commit-message:] Signed-off-by: Philipp Tomsich

Merge git://git.denx.de/u-boot-imx

2017-12-29T14:27:04Z

ARM: imx6: Disable DDR DRAM calibration DHCOM i.MX6 PDK

2017-12-29T10:18:59Z

The DDR DRAM calibration doesn't work on T-topology sometimes, so disable it. Signed-off-by: Marek Vasut Cc: Stefano Babic

warp: imximage.cfg: Handle the CONFIG_SECURE_BOOT case

2017-12-29T10:18:59Z

Secure boot is not enabled in warp imximage.cfg, add support for it. Signed-off-by: Breno Lima Reviewed-by: Fabio Estevam

mx6slevk: imximage.cfg: Handle the CONFIG_SECURE_BOOT case

2017-12-29T10:18:59Z

Secure boot is not enabled in mx6slevk imximage.cfg, add support for it. Signed-off-by: Breno Lima Reviewed-by: Fabio Estevam Acked-by: Peng Fan

mx6sxsabresd: Load the correct dtb for revA board

2017-12-29T10:18:59Z

Currently only imx6sx-sdb.dtb is loaded, but if revA board is used the correct dtb is imx6sx-sdb-reva.dtb, so make this possible. While at it, remove an extra 'mmc dev'. Signed-off-by: Fabio Estevam

imx: Add a common way for detecting NXP boards revision

2017-12-29T10:18:59Z

NXP development boards based on i.MX6/i.MX7 contain the board revision information stored in the fuses. Introduce a common function that can be shared by different boards and convert mx6sabreauto to use this new mechanism. Signed-off-by: Fabio Estevam

ARM: imx: cm_fx6: remove esdhc init code from board file

2017-12-29T10:18:59Z

Commit 5248930ebf48 ("dm: imx: cm_fx6: Enable more driver model support") enabled driver model support for MMC. Remove the old mmc init code, which is no longer used, from the board file. Signed-off-by: Christopher Spinrath Reviewed-by: Fabio Estevam Reviewed-by: Simon Glass