u-boot.git/board, branch v2018.05-rc2

x86: Rename coreboot-x86 to coreboot

2018-04-16T14:38:53Z

We only use coreboot as a target on x86 platforms, since on ARM platforms U-Boot always runs as the primary boot loader. Rename the coreboot-x86 platform to reflect this. Signed-off-by: Simon Glass Reviewed-by: Bin Meng

Merge git://git.denx.de/u-boot-imx

2018-04-15T12:43:50Z

Signed-off-by: Tom Rini

mx6cuboxi: Fix some memory configuration errors

2018-04-15T09:56:21Z

These changes bring mainline back into line with the configurations that were originally set in our stable BSP. Signed-off-by: Jon Nettleton Signed-off-by: Fabio Estevam

mx31ads: Delete

2018-04-15T09:54:02Z

This platform has been marked as orphaned since September 2013, remove. Signed-off-by: Tom Rini

imx31_phycore: Delete

2018-04-15T09:52:39Z

This platform has been marked as orphaned since September 2013, remove. Signed-off-by: Tom Rini

boot: script: The boot.scr file for K+P's boards

2018-04-15T09:47:35Z

By using this file one can avoid cluttering .h file with u-boot HUSH commands necessary for booting target device. With such approach the commands are stored only in one place and can be reused if needed. Signed-off-by: Lukasz Majewski Reviewed-by: Stefano Babic

imx: board: Add support for the K+P's kp_imx6q_tpc board

2018-04-15T09:47:19Z

This commit provides support for Kieback & Peter GmbH IMX6Q based TPC board. U-boot console output: U-Boot SPL 2018.05-rc1-00005-g631e2d01fd (Apr 04 2018 - 21:16:24 +0200) Trying to boot from MMC1 U-Boot 2018.05-rc1-00005-g631e2d01fd (Apr 04 2018 - 21:16:24 +0200) CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 37C Reset cause: POR Board: K+P KP_IMX6Q_TPC i.MX6Q Watchdog enabled I2C: ready DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: FEC [PRIME] Autoboot in 3 seconds

board: ge: bx50v3: enable backlight on demand

2018-04-15T09:46:20Z

Enable display backlight only if a message needs to be displayed. The kernel re-initializes the backlight, which results in some unwanted artifacts. Signed-off-by: Ian Ray Signed-off-by: Sebastian Reichel

warp7: Set u-boot serial# based on OTP value

2018-04-15T09:44:13Z

u-boot has a standard "serial#" environment variable that is suitable for storing the iSerial number we will supply via the USB device descriptor. serial# is automatically picked up by the disk subsystem in u-boot - thus providing a handy unique identifier in /dev/disk/by-id as detailed below. Storing the hardware serial identifier in serial# means we can change the serial# if we want before USB enumeration - thus making iSerial automatic via OTP but overridable if necessary. This patch reads the defined OTP fuse and sets environment variable "serial#" to the value read. With this patch in place the USB mass storage device will appear in /dev/disk/by-id with a unique name based on the OTP value. For example /dev/disk/by-id/usb-Linux_UMS_disk_0_WaRP7-0xf42400d3000001d4-0:0 Signed-off-by: Bryan O'Donoghue Cc: Fabio Estevam Cc: Rui Miguel Silva Cc: Ryan Harkin Reviewed-by: Fabio Estevam

ARM: rmobile: Convert TPL to SPL

2018-04-13T21:41:45Z

There is currently no use for building the SPL anymore, since the SPI loader can easily be replaced by TPL and TPL does load U-Boot directly. Upgrade TPL to SPL and replace what used to be SPL with it. This way we build the U-Boot sources only twice, not thrice. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu