u-boot.git/board, branch v2018.09 Unnamed repository; edit this file 'description' to name the repository. pico-imx7d: Update the README file 2018-09-06T13:19:13+00:00 Fabio Estevam festevam@gmail.com 2018-09-04T13:23:12+00:00 4cdeda511f8037015b568396e6dcc3d8fb41e8c0 Update the README file to take into accound the switch to SPL. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> 
Update the README file to take into accound the switch to SPL.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
ARM: qemu-arm: Fix qemu_arm64_defconfig for QEMU 3.0 2018-09-06T02:14:37+00:00 Tuomas Tynkkynen tuomas.tynkkynen@iki.fi 2018-09-04T15:16:52+00:00 861b85c482b3aec5bbb8cdcc364aa6f15aebeba5 QEMU 3.0 introduced additional memory-mapped regions for PCI-E ECAM and MMIO. Thus we need to add them to our MMU map or U-Boot will crash with a Synchronous Abort during PCI-E probing when it tries to access the unmapped ECAM memory area. Reported-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Tested-by: Jonathan Gray <jsg@jsg.id.au> 
QEMU 3.0 introduced additional memory-mapped regions for PCI-E ECAM and
MMIO. Thus we need to add them to our MMU map or U-Boot will crash with
a Synchronous Abort during PCI-E probing when it tries to access the
unmapped ECAM memory area.

Reported-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Tested-by: Jonathan Gray <jsg@jsg.id.au>
amlogic: board p212: Fix Ethernet PHY init 2018-09-05T20:02:34+00:00 Jasper kcoding jasperkcoding@gmail.com 2018-09-03T20:14:53+00:00 a92e52137d3cdad60d5984936330ad0fca1b4a2b Without this patch the Ethernet PHY on the p212 board does not get fully configured. When this happens Ethernet does not function. The similar libretech-cc and khadas-vim boards have this code already. That's why the Ethernet on these boards do work. Signed-off-by: Jasper Kcoding <jasperkcoding@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> 
Without this patch the Ethernet PHY on the p212 board does not get
fully configured.
When this happens Ethernet does not function.

The similar libretech-cc and khadas-vim boards have this code already.
That's why the Ethernet on these boards do work.

Signed-off-by: Jasper Kcoding <jasperkcoding@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Merge branch 'master' of git://git.denx.de/u-boot-imx 2018-09-04T21:45:53+00:00 Tom Rini trini@konsulko.com 2018-09-04T21:45:53+00:00 b2f90c461e999a1b1a03c7f9f79069b5440b2306 






mx7dsabresd: Add the qspi target to the list of supported defconfigs
2018-09-04T06:47:23+00:00

Fabio Estevam
fabio.estevam@nxp.com

2018-09-01T17:24:56+00:00

c1d1543ebc6e1fb026d0d7ac96d865faa7567555

Add an entry for mx7dsabresd_qspi_defconfig to avoid the following
warnings:

WARNING: no status info for 'mx7dsabresd_qspi'
WARNING: no maintainers for 'mx7dsabresd_qspi'

Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>





Add an entry for mx7dsabresd_qspi_defconfig to avoid the following
warnings:

WARNING: no status info for 'mx7dsabresd_qspi'
WARNING: no maintainers for 'mx7dsabresd_qspi'

Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>







colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support
2018-09-04T06:47:23+00:00

Stefan Agner
stefan.agner@toradex.com

2018-08-06T07:19:19+00:00

a62c60610f514063ac71f8835b47d413972256b8

This commit adds support for the Toradex Colibri iMX7D 1GB Computer
on Module. The module is very similar to the Colibri iMX7D 512MB
but uses eMMC instead of raw NAND. This patch introduces a new
board specific Kconfig symbol to select between the two flash
options.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>





This commit adds support for the Toradex Colibri iMX7D 1GB Computer
on Module. The module is very similar to the Colibri iMX7D 512MB
but uses eMMC instead of raw NAND. This patch introduces a new
board specific Kconfig symbol to select between the two flash
options.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>







board: toradex: common: fail gracefully on missing NAND chip
2018-09-04T06:47:23+00:00

Stefan Agner
stefan.agner@toradex.com

2018-08-06T07:19:18+00:00

bc53fb19fef1afbd7b328ea72de5be313016f585

If the NAND chip is missing get_nand_dev_by_index() returns NULL. Fail
gracefully in this case.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>





If the NAND chip is missing get_nand_dev_by_index() returns NULL. Fail
gracefully in this case.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>







imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot
2018-09-04T06:47:23+00:00

Ye Li
ye.li@nxp.com

2018-06-28T03:23:17+00:00

1a8c01995fa7a5086a51f3cf0d11e54ef07beefe

Convert the codes and configurations to enable DM drivers in u-boot for
modules: i2c, PMIC, regulator, USB, Ethernet, SD/MMC, GPIO and QSPI

This patch does not change SPL, so it still uses non-DM driver for
UART, GPIO and SD/MMC.

Signed-off-by: Ye Li <ye.li@nxp.com>





Convert the codes and configurations to enable DM drivers in u-boot for
modules: i2c, PMIC, regulator, USB, Ethernet, SD/MMC, GPIO and QSPI

This patch does not change SPL, so it still uses non-DM driver for
UART, GPIO and SD/MMC.

Signed-off-by: Ye Li <ye.li@nxp.com>







imx: imx7d-sdb: Add DM QSPI support
2018-09-04T06:47:23+00:00

Ye Li
ye.li@nxp.com

2018-06-28T02:30:53+00:00

3b82335015cc695b760c90f904ea85bae53c0597

On iMX7D SabreSD board, the QSPI has pins conflict with EPDC (default).
To use QSPI, users have to rework the board (de-populate R388-R391, R396-R399
populate R392-R395, R299, R300). So we add new DTS file and new defconfig
dedicated for QSPI.

Other changes to support the DM QSPI:
 - Add QSPI node and alias spi0.
 - Modify spi4 (spi-gpio) node and add alias spi5 for it to avoid req
   conflict
 - Add EPDC node in imx7d.dtsi and disable it in imx7d-sdb-qspi.dts to
   align with kernel and also present the conflict.
 - Add -u-boot.dtsi to modify compatible string of mx25l51245g@0 to
   "spi-flash"
 - Remove iomux settings of qspi in board codes which is not needed
   for DM driver.

Signed-off-by: Ye Li <ye.li@nxp.com>





On iMX7D SabreSD board, the QSPI has pins conflict with EPDC (default).
To use QSPI, users have to rework the board (de-populate R388-R391, R396-R399
populate R392-R395, R299, R300). So we add new DTS file and new defconfig
dedicated for QSPI.

Other changes to support the DM QSPI:
 - Add QSPI node and alias spi0.
 - Modify spi4 (spi-gpio) node and add alias spi5 for it to avoid req
   conflict
 - Add EPDC node in imx7d.dtsi and disable it in imx7d-sdb-qspi.dts to
   align with kernel and also present the conflict.
 - Add -u-boot.dtsi to modify compatible string of mx25l51245g@0 to
   "spi-flash"
 - Remove iomux settings of qspi in board codes which is not needed
   for DM driver.

Signed-off-by: Ye Li <ye.li@nxp.com>







imx: imx6sx-sabreauto: convert to use DM QSPI driver
2018-09-04T06:47:23+00:00

Ye Li
ye.li@nxp.com

2018-06-28T02:27:00+00:00

0925ee21851287d48279bb43e4a0876b2005a5f2

To support DM QSPI driver:
 - Add -u-boot.dtsi to modify n25q256a@0 and n25q256a@1 compatible string
   to "spi-flash" and add "num-cs" property.
 - Enable DM SPI and DM SPI FLASH configurations
 - Remove iomux settings of qspi1 in board codes which is not needed
   for DM driver.

Signed-off-by: Ye Li <ye.li@nxp.com>





To support DM QSPI driver:
 - Add -u-boot.dtsi to modify n25q256a@0 and n25q256a@1 compatible string
   to "spi-flash" and add "num-cs" property.
 - Enable DM SPI and DM SPI FLASH configurations
 - Remove iomux settings of qspi1 in board codes which is not needed
   for DM driver.

Signed-off-by: Ye Li <ye.li@nxp.com>