u-boot.git/board, branch v2020.01-rc2

Merge tag 'u-boot-rockchip-20191110' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip

2019-11-11T19:19:32Z

- Add support for rockchip pmic rk805,rk809, rk816, rk817 - Add rk3399 board Leez support - Fix bug in rk3328 ram driver - Adapt SPL to support ATF bl31 with entry at 0x40000 - Fix the u8 type comparision with '-1'. - Fix checkpatch warning for multi blank line and review signature.

Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq

2019-11-11T19:19:04Z

- Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC. - Few bug fixes and updates related to SPI, hwconfig, ethernet, fsl-layerscape, pci, icid, PSCI

rockchip: rk3399: Add Leez P710 support

2019-11-10T12:40:20Z

Specification - Rockchip RK3399 - LPDDR4 - TF sd scard slot - eMMC - M.2 B-Key for 4G LTE - AP6256 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 - TYPE-C Power supply Commit details of rk3399-leez-p710.dts sync from linus tree for Linux 5.4-rc1: "arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC" (sha1: fc702ed49a8668a17343811ee28214d845bfc5e6) Signed-off-by: Andy Yan Reviewed-by: Kever Yang

Merge branch '2019-11-07-master-imports'

2019-11-08T12:27:45Z

- Add Phytium Durian Board - Assorted bugfixes - Allow for make ERR_PTR/PTR_ERR architecture specific

freescale/powerpc: Rename the config CONFIG_SECURE_BOOT name

2019-11-08T11:02:08Z

Rename the CONFIG_SECURE_BOOT name to CONFIG_NXP_ESBC to avoid conflicts with UEFI secure boot. Signed-off-by: Udit Agarwal Signed-off-by: Priyanka Jain

freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name

2019-11-08T11:02:08Z

Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC to avoid conflict with UEFI secure boot. Signed-off-by: Udit Agarwal Signed-off-by: Priyanka Jain

armv8: lx2160a: add icid setup for platform devices

2019-11-08T05:43:38Z

Add ICID setup for the platform devices contained on this chip: usb, sata, sdhc, sec. Signed-off-by: Laurentiu Tudor Reviewed-by: Horia Geanta Reviewed-by: Priyanka Jain

armv8: ls2088a: add icid setup for platform devices

2019-11-08T05:43:38Z

Add ICID setup for the platform devices contained on this chip: usb, sata, sdhc, sec. Signed-off-by: Laurentiu Tudor Reviewed-by: Horia Geanta Reviewed-by: Priyanka Jain

Kconfig: ti: Make board detect EEPROM addresses depend BOARD_DETECT

2019-11-07T23:39:18Z

There is an option to enable the board detection for TI platforms. If this is option is not set, there is no reason to set the EEPROM bus address or chip address. This patch makes both EEPROM_BUS_ADDRESS and EEPROM_CHIP_ADDRESS depend on TI_I2C_BOARD_DETECT. Signed-off-by: Adam Ford

ARM: omap3_logic: Power on MMC when setting up PMIC

2019-11-07T23:39:18Z

The PMIC enables power to the MMC card by default, but depending on the state it was left when restarted, it's possible the MMC may be powered down. This patch patch explicitly tells the twl4030 to power the MMC. Signed-off-by: Adam Ford