u-boot.git/board, branch v2023.07

colibri-imx7: Call fdt_increase_size()

2023-07-05T15:27:52Z

For changing the USB OTG node status from "okay" to "disabled" more space is needed, so call fdt_increase_size() to avoid the following error: ``` U-Boot 2023.07-rc5-0.0.0-devel+git.580eb31199be (Jun 27 2023 - 13:39:58 +0000) CPU: Freescale i.MX7S rev1.2 800 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 30C Reset cause: POR DRAM: initcall sequence 8786eafc failed at call 8781b351 (err=-3) ### ERROR ### Please RESET the board ### ``` Ideally, fdt_status_disabled() should call fdt_increase_size() internally, so that there would be no need for manually calling it in board code. Do it manually for now to fix the regression. Based on the code from board/CZ.NIC/turris_omnia/turris_omnia.c. Reported-by: Francesco Dolcini Signed-off-by: Fabio Estevam Reviewed-by: Francesco Dolcini Tested-by: Francesco Dolcini # Toradex Colibri iMX7S

smegw01: Fix wrong symbol override

2023-06-29T13:55:50Z

board_mmc_get_env_part() is not called as the default implementation of mmc_get_env_part() is used. Fix this problem by directly calling mmc_get_env_part() instead. Signed-off-by: Eduard Strehlau Signed-off-by: Fabio Estevam

pinephone-pro: Fix I/O port voltage (GPIO3D4A is 1.8V)

2023-06-29T10:32:17Z

This fixes access to camera sensor over I2C during probe time in the kernel. (Kernel will fix I/0 port voltage by itself, but the timing depends on probe order of the drivers, so the fix can come after the camera sensor driver already failed to probe.) Signed-off-by: Ondrej Jirman Cc: Kever Yang Reviewed-by: Kever Yang Reviewed-by: Peter Robinson Tested-by: Peter Robinson

MAINTAINERS: update SiFive HiFive Unmatched maintainers

2023-06-27T02:09:46Z

Email account pragnesh.patel@sifive.com does not exist anymore. Signed-off-by: Heinrich Schuchardt

board: starfive: Fixed errors reported when executing get_maintainer.pl

2023-06-27T02:09:41Z

Fixed errors reported when executing 'scripts/get_maintainer.pl -f configs/starfive_visionfive2_defconfig'. Invalid MAINTAINERS address: 'startfive' Signed-off-by: Yanhong Wang Reviewed-by: Leo Yu-Chi Liang

smegw01: Fix duplicate bootcmd

2023-06-26T15:30:22Z

Two conflicting bootcmds were included in the environment. Streamline to defining the bootcmd only in the env file. Signed-off-by: Eduard Strehlau Signed-off-by: Fabio Estevam

board: pm9g45: add missing gpio_request()

2023-06-16T09:02:02Z

This fixes the following run time error message: set_dir_flags: error: gpio PIOD3 not reserved set_dir_flags: error: gpio PIOC14 not reserved Signed-off-by: Ilko Iliev

renesas: rcar: Apply ATF overlay for reserved-memory

2023-06-10T15:06:38Z

The function fdtdec_board_setup() is called early and adds the overlay from ATF to the u-boot device tree. That is necessary so that u-boot doesn't use reserved memory. Linux also needs to know about that reserved memory so the overlay from ATF needs to be aplied on the linux device tree as well. This commit makes sure that the ATF overlay is applied to both device trees. Signed-off-by: Detlev Casanova Reviewed-by: Marek Vasut Reviewed-by: Adam Ford

imx9: imx93_evk: update ddr timing file

2023-05-21T14:54:41Z

Update DDR timing file generated by DDR Config Tool 1. Dynamic refresh rate is set by default 2. The 3rd freq will be 625MTS based on power and performance better than 100MTS. Signed-off-by: Ye Li Signed-off-by: Peng Fan

imx9: imx93_evk: add low drive mode support on 11x11 EVK

2023-05-21T14:54:41Z

Add a static u-boot config for i.MX93 low drive mode support. When low drive mode is enabled, VDD_SOC is set to 0.75V. Bus clocks, A55 core clock (900Mhz), DDR clock (1866MTS), and some peripherals clocks (USDHC/FLEXSPI/PDM/DISP_PIX/CAM_PIX) must decrease to meet max frequencies in low drive mode. Also set standby voltage for buck1 Signed-off-by: Ye Li Signed-off-by: Peng Fan