u-boot.git/cmd/Kconfig, branch master

w1: Correct dependencies for CMD_W1

2026-04-07T17:32:36+00:00

The CMD_W1 functionality can only work with both W1 and W1_EEPROM
enabled, so express this dependency in Kconfig.

Signed-off-by: Tom Rini

cmd: Correct dependencies for CMD_BOOTD

2026-04-07T17:32:32+00:00

The CMD_BOOTD functionality can only work with CMD_BOOTM enabled, so
express this dependency in Kconfig.

Signed-off-by: Tom Rini

env: remote: Disallow CMD_SAVEENV

2026-04-07T17:30:41+00:00

Looking at how the saveenv portion of this driver was implemented, it
does not appear that it could actually result in changes being saved on
the remote end. Update Kconfig to disallow CMD_SAVEENV for
ENV_IS_IN_REMOTE and then remove the relevant code.

Signed-off-by: Tom Rini

cmd: Add missing dependency to CMD_PMC

2026-04-03T19:42:49+00:00

We cannot build CMD_PMC without ACPI_PMC, so add that as a dependency.

Signed-off-by: Tom Rini

loads: Add LMB as a dependency

2026-04-03T19:42:49+00:00

As this command calls lmb_alloc_mem directly it must depend on LMB being
enabled.

Signed-off-by: Tom Rini

lmb: Correct dependency around CMD_BOOT[IMZ]

2026-04-03T19:42:49+00:00

The calls around lmb functions for these commands are not specific to
SYS_BOOT_RAMDISK_HIGH but rather part of the general loading portion of
the command itself currently. Move this dependency to the right spot.

Signed-off-by: Tom Rini

sata: Rework the CMD_SATA and SATA symbols

2026-04-03T18:06:14+00:00

Today we typically enable CMD_SATA in order to have the SATA
functionality itself enabled, despite there being a clean split between
the two symbols. This in turn leads to potential configuration problems.
Split things so that SATA continues to be separate and not CMD_SATA
instead depends, functionally, on AHCI being enabled.

To do all of this:
- Have X86 select AHCI directly rather than "default y" it later.
- Make CMD_SATA be a default y option, given the split of platforms that
  enabled SATA and did, or did not, enable CMD_SATA.
- Change "imply CMD_SATA" to "imply SATA"
- Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL
  without PCI (and in turn, SATA is needed for SATA_SIL).
- Update a number of defconfigs to have no functional change.

Signed-off-by: Tom Rini

Merge tag 'net-20260331' of https://source.denx.de/u-boot/custodians/u-boot-net into next

2026-03-31T19:06:00+00:00

Pull request net-20260331.

net:
- airoha_eth & pcs_airoha driver fixes
- Rework some symbol dependencies
- dwc_eth_xgmac: Move DMA reset and pad calibration after PHY init
- rtl8169: add support for RTL8125d
- rswitch: Avoid NULL pointer dereference during PHY access
- rswitch: Remap CPU to bus addresses using dev_phys_to_bus()
- phy: dp83867: reset PHY on init to ensure clean state

net-lwip:
- nfs: fix buffer overflow when using symlinks
- tftp: update image_load_addr after successful transfer

[trini: Add missing "if NET" to CMD_DHCP select's CMD_BOOTP]
Signed-off-by: Tom Rini

cmd: dhcp: Select CMD_BOOTP

2026-03-31T14:54:49+00:00

The DHCP command depends on bootp_reset() function, which is implemented
only if CMD_BOOTP is enabled. Select CMD_BOOTP to satisfy the dependency.

Signed-off-by: Marek Vasut 
Reviewed-by: Tom Rini 
Reviewed-by: Heiko Schocher 
Reviewed-by: Kory Maincent

net: cmd: Correct dependencies for CMD_PXE

2026-03-31T14:54:49+00:00

The CMD_PXE functionality can only build with CMD_TFTPBOOT enabled (or
we get undefined references to do_tftpb), so express this dependency in
Kconfig.

Signed-off-by: Tom Rini