u-boot.git/cmd/Kconfig, branch v2018.03 Unnamed repository; edit this file 'description' to name the repository. Kconfig: cmd: Make networking command dependent on NET 2018-02-27T21:25:30+00:00 Michal Simek michal.simek@xilinx.com 2018-02-26T15:01:02+00:00 3b3ea2c56ec4bc5588281fd103c744e608f8b25c Enable networking command only when NET is enabled. And remove selecting NET for CMD_NET Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tom Rini <trini@konsulko.com> 
Enable networking command only when NET is enabled.
And remove selecting NET for CMD_NET

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig 2018-02-24T02:41:49+00:00 Adam Ford aford173@gmail.com 2018-02-06T13:58:59+00:00 d021e942107a1f7304a879cec99286ca462f7be3 This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-run the migration] Signed-off-by: Tom Rini <trini@konsulko.com> 
This converts the following to Kconfig:
   CONFIG_BOOTP_BOOTPATH
   CONFIG_BOOTP_DNS
   CONFIG_BOOTP_GATEWAY
   CONFIG_BOOTP_HOSTNAME
   CONFIG_BOOTP_PXE
   CONFIG_BOOTP_SUBNETMASK
   CONFIG_CMDLINE_EDITING
   CONFIG_AUTO_COMPLETE
   CONFIG_SYS_LONGHELP
   CONFIG_SUPPORT_RAW_INITRD
   CONFIG_ENV_VARS_UBOOT_CONFIG

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Re-run the migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
dfu: Fix up the Kconfig mess 2018-02-21T19:28:15+00:00 Marek Vasut marek.vasut@gmail.com 2018-02-16T15:41:17+00:00 0f44d33536a50ef65259c322fa2d4a058585caf9 Clean up the screaming mess of configuration options that DFU is. It was impossible to configure DFU such that TFTP is enabled and USB is not, this patch fixes that and assures that DFU TFTP and DFU USB can be enabled separatelly and that the correct pieces of code are compiled in. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Lukasz Majewski <lukma@denx.de> 
Clean up the screaming mess of configuration options that DFU is.
It was impossible to configure DFU such that TFTP is enabled and
USB is not, this patch fixes that and assures that DFU TFTP and
DFU USB can be enabled separatelly and that the correct pieces
of code are compiled in.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
cmd: scsi: move CMD_SCSI to device access commands 2018-02-14T17:14:16+00:00 Heinrich Schuchardt xypron.glpk@gmx.de 2018-02-14T07:05:44+00:00 0c3fecd0bf8e36af8e53f3213f141d98c2907455 Configuration option CMD_SCSI should be placed in the same submenu as CMD_SATA and CMD_MMC. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> 
Configuration option CMD_SCSI should be placed in the same submenu as
CMD_SATA and CMD_MMC.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
cmd: fitupd: Convert CONFIG_CMD_FITUPD 2018-02-14T01:34:07+00:00 Marek Vasut marek.vasut@gmail.com 2018-02-10T15:22:05+00:00 ac08432a4c24279e42d969ae1c2061bd8221fb56 Convert the CONFIG_CMD_FITUPD symbol to Kconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> 
Convert the CONFIG_CMD_FITUPD symbol to Kconfig.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig 2018-02-09T00:09:03+00:00 Adam Ford aford173@gmail.com 2018-02-06T18:43:56+00:00 1811a928c6c7604d6d05a84b4d552a7c31b4994e config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: Tom Rini <trini@konsulko.com> 
config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE
based on a list of enabled options.  Moving HAVE_BLOCK_DEVICE to
Kconfig allows us to drastically shrink the logic in
config_fallbacks.h

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE]
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert LIB_UUID to Kconfig 2018-02-09T00:08:39+00:00 Adam Ford aford173@gmail.com 2018-02-06T18:14:28+00:00 a451bc27c9afd1be537bb04946fb4cb1b2cf6280 config_fallback.h has some logic that checks a variety of options and selects LIB_UUID if it hasn't already been selected. This will all LIB_UUID in Kconfig and select this option for the list of options to allow us to remove the logic from fallbacks Signed-off-by: Adam Ford <aford173@gmail.com> 
config_fallback.h has some logic that checks a variety of options
and selects LIB_UUID if it hasn't already been selected.  This
will all LIB_UUID in Kconfig and select this option for the list
of options to allow us to remove the logic from fallbacks

Signed-off-by: Adam Ford <aford173@gmail.com>
cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA 2018-02-06T01:58:11+00:00 Tuomas Tynkkynen tuomas@tuxera.com 2018-01-27T18:28:40+00:00 a4fa8114632a008735142b12a29de1771a115209 cmd/Makefile has: ifdef CONFIG_FPGA obj-$(CONFIG_CMD_FPGA) += fpga.o endif which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently does nothing. Let's remove that Makefile conditional and instead express this equivalent dependency in Kconfig, so a lot of redundant # CONFIG_CMD_FPGA is not set can be removed from board defconfigs that don't actually have an FPGA. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> 
cmd/Makefile has:

ifdef CONFIG_FPGA
obj-$(CONFIG_CMD_FPGA) += fpga.o
endif

which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
does nothing. Let's remove that Makefile conditional and instead express
this equivalent dependency in Kconfig, so a lot of redundant

 # CONFIG_CMD_FPGA is not set

can be removed from board defconfigs that don't actually have an FPGA.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
usb: ums: Kconfig: Select USB_FUNCTION_MASS_STORAGE when enabling 'ums' command 2018-02-02T12:13:48+00:00 Lukasz Majewski lukma@denx.de 2018-01-29T18:28:02+00:00 e4d4604a7bf06fa24373e016edb465030901ad86 The CONFIG_USB_FUNCTION_MASS_STORAGE must be selected when one enables support for ums command. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> 
The CONFIG_USB_FUNCTION_MASS_STORAGE must be selected when one enables
support for ums command.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Merge git://git.denx.de/u-boot-sunxi 2018-01-26T18:22:40+00:00 Tom Rini trini@konsulko.com 2018-01-26T18:22:40+00:00 748277c415ff5bd74d6913928cab2a3da6a0b69f