u-boot.git/cmd/Kconfig, branch v2020.01

cmd: mdio/mii: add Kconfig help and allow break dependency

2019-12-09T15:47:42+00:00

* Add Kconfig help describing the purpose of each command.
* Add CONFIG_CMD_MDIO so it could be selected individually, as
  it doesn't depend on the mii command.
* Add Kconfig imply to mii to automatically select the mdio
  command.

Signed-off-by: Ramon Fried 
Acked-by: Joe Hershberger

rtc: move date.c from drivers/rtc/ to lib/

2019-12-06T21:44:19+00:00

In the next commit, rtc_mktime(), for compatibility with linux, will be
implemented using rtc_mktime(), which is no longer drivers/rtc specific.
So move this file under lib/.

Signed-off-by: AKASHI Takahiro

cmd: sysboot: Create a sysboot command dedicated file

2019-12-06T21:44:18+00:00

Extract all sysboot command related code from pxe.c to new sysboot.c
Update Kconfig to insure that DISTRO_DEFAULT select new CMD_SYSBOOT
command.

Signed-off-by: Patrice Chotard

cmd: make MTD commands depend on MTD

2019-12-04T22:10:51+00:00

Defconfigs have been fixed, now we can add proper dependencies in
Kconfig. SPI FLASH is still not dependent on MTD (deeper rework needed).

Signed-off-by: Miquel Raynal

cmd: mtdparts: Kconfig: join mtdparts command entry with its options

2019-12-04T22:10:51+00:00

Move the Kconfig entry of the option right after the entry of the
mtdparts command.

Signed-off-by: Miquel Raynal

mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD

2019-12-04T04:04:10+00:00

Like in Linux, just use CONFIG_MTD to compile the MTD stack.

Signed-off-by: Miquel Raynal 
Reviewed-by: Boris Brezillon

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

2019-12-04T04:04:10+00:00

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal 
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini 
Reviewed-by: Boris Brezillon

efi_loader: support building UEFI binaries on sandbox

2019-11-12T22:13:54+00:00

On the sandbox the UEFI binaries must match the host architectures.

Adjust the Makefiles. Provide the PE/COFF header and relocation files.

Allow building helloworld.efi on the sandbox.

Signed-off-by: Heinrich Schuchardt

cmd: move down CONFIG_CMD_BOOTEFI after CONFIG_BOOTM_VXWORKS

2019-11-08T12:10:14+00:00

Due to the commit 4b0bcfa7c4ec ("Kconfig: Migrate CONFIG_BOOTM_* options")
BOOTEFI and BOOTEFI_HELLO_COMPILE (and other BOOTEFI configs) are
displayed in a long distance. This will make it difficult for us to
understand that those configurations are closely related.

Signed-off-by: AKASHI Takahiro 
Reviewed-by: Heinrich Schuchardt 
Reviewed-by: Tom Rini

cmd: mtdparts: Fix build with option ..._SHOW_NET_SIZES

2019-11-07T23:01:13+00:00

That option is currently not used by any defconfig and could not be set
anymore since it became mandatory to used Kconfig when introducing new
options with U-Boot v2016.11 or commit eed921d92348 ("Kconfig: Add a
whitelist of ad-hoc CONFIG options") and commit 371244cb19f9 ("Makefile:
Give a build error if ad-hoc CONFIG options are added").

It was also not considered when fixing build warnings in
commit 39ac34473f3c ("cmd_mtdparts: use 64 bits for flash size,
partition size & offset") and could probably not be compiled anyway
after commit dfe64e2c8973 ("mtd: resync with Linux-3.7.1"), which
renamed some members of struct mtd_info … so it was probably broken
since then, which was U-Boot v2013.07-rc1.

However it still seems to work, see example output below:

U-Boot 2019.10-00035-g06a9b259ca-dirty (Oct 30 2019 - 14:03:44 +0100)

CPU: SAMA5D27 1G bits DDR2 SDRAM
Crystal frequency:       24 MHz
CPU clock        :      492 MHz
Master clock     :      164 MHz
Model: ***
DRAM:  128 MiB
NAND:  256 MiB
Loading Environment from NAND... OK
In:    serial@f8020000
Out:   serial@f8020000
Err:   serial@f8020000
Net:   eth0: ethernet@f8008000
Hit keys 'tt' to stop autoboot (3 seconds).
U-Boot> mtdparts

device nand0 , # parts = 8
 #: name                size            net size        offset          mask_flags
 0: bootstrap           0x00040000      0x00040000      0x00000000      1
 1: uboot               0x000c0000      0x000c0000      0x00040000      1
 2: env1                0x00040000      0x00040000      0x00100000      0
 3: env2                0x00040000      0x00040000      0x00140000      0
 4: fpga_led            0x00040000      0x00040000      0x00180000      1
 5: reserved            0x00040000      0x00040000      0x001c0000      1
 6: rootfs_rec          0x03200000      0x03200000      0x00200000      1
 7: filesystem          0x0cc00000      0x0cb80000 (!)  0x03400000      0

active partition: nand0,0 - (bootstrap) 0x00040000 @ 0x00000000

defaults:
mtdids  : nand0=atmel_nand
mtdparts: mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env1),256k(env2),256k(fpga_led)ro,256k(reserved)ro,50M(rootfs_rec)ro,-(filesystem)

Signed-off-by: Alexander Dahl