u-boot.git/cmd/Kconfig, branch v2020.01-rc4

efi_loader: support building UEFI binaries on sandbox

2019-11-12T22:13:54Z

On the sandbox the UEFI binaries must match the host architectures. Adjust the Makefiles. Provide the PE/COFF header and relocation files. Allow building helloworld.efi on the sandbox. Signed-off-by: Heinrich Schuchardt

cmd: move down CONFIG_CMD_BOOTEFI after CONFIG_BOOTM_VXWORKS

2019-11-08T12:10:14Z

Due to the commit 4b0bcfa7c4ec ("Kconfig: Migrate CONFIG_BOOTM_* options") BOOTEFI and BOOTEFI_HELLO_COMPILE (and other BOOTEFI configs) are displayed in a long distance. This will make it difficult for us to understand that those configurations are closely related. Signed-off-by: AKASHI Takahiro Reviewed-by: Heinrich Schuchardt Reviewed-by: Tom Rini

cmd: mtdparts: Fix build with option ..._SHOW_NET_SIZES

2019-11-07T23:01:13Z

That option is currently not used by any defconfig and could not be set anymore since it became mandatory to used Kconfig when introducing new options with U-Boot v2016.11 or commit eed921d92348 ("Kconfig: Add a whitelist of ad-hoc CONFIG options") and commit 371244cb19f9 ("Makefile: Give a build error if ad-hoc CONFIG options are added"). It was also not considered when fixing build warnings in commit 39ac34473f3c ("cmd_mtdparts: use 64 bits for flash size, partition size & offset") and could probably not be compiled anyway after commit dfe64e2c8973 ("mtd: resync with Linux-3.7.1"), which renamed some members of struct mtd_info … so it was probably broken since then, which was U-Boot v2013.07-rc1. However it still seems to work, see example output below: U-Boot 2019.10-00035-g06a9b259ca-dirty (Oct 30 2019 - 14:03:44 +0100) CPU: SAMA5D27 1G bits DDR2 SDRAM Crystal frequency: 24 MHz CPU clock : 492 MHz Master clock : 164 MHz Model: *** DRAM: 128 MiB NAND: 256 MiB Loading Environment from NAND... OK In: serial@f8020000 Out: serial@f8020000 Err: serial@f8020000 Net: eth0: ethernet@f8008000 Hit keys 'tt' to stop autoboot (3 seconds). U-Boot> mtdparts device nand0 , # parts = 8 #: name size net size offset mask_flags 0: bootstrap 0x00040000 0x00040000 0x00000000 1 1: uboot 0x000c0000 0x000c0000 0x00040000 1 2: env1 0x00040000 0x00040000 0x00100000 0 3: env2 0x00040000 0x00040000 0x00140000 0 4: fpga_led 0x00040000 0x00040000 0x00180000 1 5: reserved 0x00040000 0x00040000 0x001c0000 1 6: rootfs_rec 0x03200000 0x03200000 0x00200000 1 7: filesystem 0x0cc00000 0x0cb80000 (!) 0x03400000 0 active partition: nand0,0 - (bootstrap) 0x00040000 @ 0x00000000 defaults: mtdids : nand0=atmel_nand mtdparts: mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env1),256k(env2),256k(fpga_led)ro,256k(reserved)ro,50M(rootfs_rec)ro,-(filesystem) Signed-off-by: Alexander Dahl

cmd: thor: select DFU subsystem also for 'thor' download tool

2019-10-31T11:12:31Z

'THOR' download command requires DFU infrastructure to properly flash board images. It can be used without enabling DFU command, so add such dependency to Kconfig. Signed-off-by: Marek Szyprowski Acked-by: Lukasz Majewski

cmd: sf: Mark it default if DM_SPI_FLASH enabled

2019-10-24T19:18:31Z

If DM_SPI_FLASH enabled that means it is using sf command for flash interface to access. SPI_FLASH can be used via sf command and board/driver functions to call spi flash ops, so mark it default only for DM_SPI_FLASH. This would prevent explicit adding of CONFIG_CMD_SF when DM_SPI_FLASH being enabled. Cc: Tom Rini Acked-by: Vignesh Raghavendra Signed-off-by: Jagan Teki

cmd: Add Support for UFS commands

2019-10-24T00:47:12Z

Add Support for commands to initialize and configure UFS devices. TODO: Add Support for commands to resize and reconfigure LUNs Signed-off-by: Faiz Abbas

Merge tag 'xilinx-for-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

2019-10-09T20:22:03Z

Xilinx/FPGA changes for v2020.01 FPGA: - Enable fpga loading on Versal - Minor fix Microblaze: - Fix LMB configurations to support initrds - Some other cleanups Zynq: - Minor config/dt changes - Add distro boot support for usb1 and mmc1 - Remove Xilinx private boot commands and use only distro boot ZynqMP: - Kconfig cleanups, defconfig updates - Update some dt files - Add firmware driver for talking to PMUFW - Extend distro boot support for jtag - Add new IDs - Add system controller configurations - Convert code to talk firmware via mailbox or SMCs Versal: - Add board_late_init() - Add run time DT memory setup - Add DFU support - Extend distro boot support for jtag and dfu - Add clock driver - Tune mini configurations Xilinx: - Improve documentation (boot scripts, dt binding) - Enable run time initrd_high calculation - Define default SYS_PROMPT - Add zynq/zynqmp virtual defconfig Drivers: - Add Xilinx mailbox driver for talking to firmware - Clean zynq_gem for Versal - Move ZYNQ_HISPD_BROKEN to Kconfig - Wire genphy_init() in phy.c - Add Xilinx gii2rgmii bridge - Cleanup zynq_sdhci - dwc3 fix - zynq_gpio fix - axi_emac fix Others: - apalis-tk1 - clean config file

arm64: zynqmp: Define default SYS_PROMPT

2019-10-08T07:55:11Z

All boards are using the same prompt that's why add it as default value to Kconfig to simplify defconfigs. Signed-off-by: Michal Simek Reviewed-by: Luca Ceresoli

ARM: zynq: Define default SYS_PROMPT

2019-10-08T07:55:11Z

All boards are using the same prompt that's why add it as default value to Kconfig to simplify defconfigs. Signed-off-by: Michal Simek

cmd: disable CMD_NVEDIT_EFI by default

2019-10-06T14:02:37Z

The growth of the UEFI sub-system leads to build failures for systems with strict limits on the U-Boot image size. CMD_NVEDIT_EFI supports displaying and editing of UEFI variables. The setting is not needed for booting. Disabling it by default reduces the size of the U-Boot image by 2 KiB. Signed-off-by: Heinrich Schuchardt