This adds several commands to add, list, and remove log filters. Due to the complexity of adding a filter, `log filter-list` uses options instead of positional arguments. These commands have been added as subcommands to log by using a dash to join the subcommand and subsubcommand. This is stylistic, and they could be converted to proper subsubcommands if it is wished. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
- Bug fixes and updates on vid, ls1088a lx2160a and other layerscape platforms. - Add optee_rpmb support for LX2 & Kontron sl28 support
This command lets the user list, select, and deselect mux controllers
introduced with the mux framework on the fly. It has 3 subcommands:
list, select, and deselect.
List: Lists all the mux present on the system. The muxes are listed for
each chip. The chip is identified by its device name. Each chip can have
a number of mux controllers. Each is listed in sequence and is assigned
a sequential ID based on its position in the mux chip. It lists details
like ID, whether the mux is currently selected or not, the current
state, the idle state, and the number of states.
A sample output would look something like:
=> mux list
a-mux-controller:
ID Selected Current State Idle State Num States
0 no unknown as-is 0x4
1 no 0x2 0x2 0x10
2 no 0x73 0x73 0x100
another-mux-controller:
ID Selected Current State Idle State Num States
0 no 0x1 0x1 0x4
1 no 0x2 0x2 0x4
Select: Selects a given mux and puts it in the specified state. This
subcommand takes 3 arguments: mux chip, mux ID, state to set
the mux in. The arguments mux chip and mux ID are used to identify which
mux needs to be selected, and then it is selected to the given state.
The mux needs to be deselected before it can be selected again in
another state. The state should be a hexadecimal number.
For example:
=> mux list
a-mux-controller:
ID Selected Current State Idle State Num States
0 no 0x1 0x1 0x4
1 no 0x1 0x1 0x4
=> mux select a-mux-controller 0 0x3
=> mux list
a-mux-controller:
ID Selected Current State Idle State Num States
0 yes 0x3 0x1 0x4
1 no 0x1 0x1 0x4
Deselect: Deselects a given mux and puts it in its idle state. This
subcommand takes 2 arguments: the mux chip and mux ID to identify which
mux needs to be deselected. So in the above example, we can deselect mux
0 using:
=> mux deselect a-mux-controller 0
=> mux list
a-mux-controller:
ID Selected Current State Idle State Num States
0 no 0x1 0x1 0x4
1 no 0x1 0x1 0x4
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Enable the command "misc" for accessing miscellaneous devices with a MISC uclass driver. The command provides listing all MISC devices as well as read and write functionalities via their drivers. Signed-off-by: Bin Meng <bin.meng@windriver.com>
The "cmd/Kconfig" has a TODO description for CMD_MISC that it should really be named as CMD_SLEEP. Change it in the whole source tree. Signed-off-by: Bin Meng <bin.meng@windriver.com>
Enable "optee_rpmb" command to write/read named persistent values created on RPMB by opening session with OPTEE AVB TA. This provides easy test for establishing a session with OPTEE TA and storage of persistent data in MMC RPMB. It includes following subcommands: optee_rpmb read_pvalue:read persistent values on rpmb via OPTEE AVB TA optee_rpmb write_pvalue:write persistent values on rpmb via OPTEE AVB TA Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
This patch adds a new pstore command allowing to display or save ramoops logs (oops, panic, console, ftrace and user) generated by a previous kernel crash. PStore parameters can be set in U-Boot configuration file, or at run-time using "pstore set" command. Records size should be the same as the ones used by kernel, and should be a power of 2. This command allows: - to display uncompressed logs - to save compressed or uncompressed logs, compressed logs are saved as a compressed stream, it may need some work to be able to decompress it, e.g. adding a fake header: "printf "\x1f\x8b\x08\x00\x00\x00\x00\x00\x00\x00" | cat - dmesg-ramoops-0.enc.z | gzip -dc" - ECC part is not used to check memory corruption - only 1st FTrace log is displayed or saved Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> [trini: Minor updates for current design, correct spacing in rST] Signed-off-by: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
At present the autoboot options are in cmd/Kconfig but they don't really relate to commands. They relate to booting, so move this menu under the boot menu. Signed-off-by: Simon Glass <sjg@chromium.org>
It is helpful to be able to see basic statistics about the bloblist and also to list its contents. Add a 'bloblist' command to handle this. Put the display functions in the bloblist modules rather than in the command code itself. That allows showing a list from SPL, where commands are not available. Also make bloblist_first/next_blob() static as they are not used outside this file. Signed-off-by: Simon Glass <sjg@chromium.org>
This commits update the support of sntp to use the framework udp. This change allows to remove all the reference to sntp in the main network file net/net.c. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>