u-boot.git/cmd/Kconfig, branch v2023.04

efi_loader: enable eficonfig command by default

2023-02-10T12:05:40Z

The eficonfig command is required to set boot options. Signed-off-by: Heinrich Schuchardt

cmd: CONFIG_CMD_EFICONFIG requires CONFIG_MENU

2023-02-10T12:05:39Z

The eficonfig command invokes functions implemented in common/menu.c like * menu_default_set() * menu_get_choice() * menu_destroy() * menu_item_add() Fixes: 87d791423ac6 ("eficonfig: menu-driven addition of UEFI boot option") Signed-off-by: Heinrich Schuchardt Reviewed-by: Simon Glass Reviewed-by: Ilias Apalodimas

cmd: Add an option to enable the ini command

2023-02-07T19:33:48Z

This command has no Kconfig option at present, but seems useful enough to keep around. Add one. Signed-off-by: Simon Glass

cmd: Add a SEAMA image load command

2023-02-06T22:10:15Z

Add a command to load SEAMA (Seattle Image), a NAND flash on-flash storage format. This type of flash image is found in some D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79 (MIPS), Broadcom BCM53xx, and RAMIPS platforms. This U-Boot command will read and decode a SEAMA image from raw NAND flash on any platform. As it is always using big endian format for the data decoding is always necessary on platforms such as ARM. The command is needed to read a SEAMA-encoded boot image on the D-Link DIR-890L router for boot from NAND flash in an upcoming port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx) architecture. A basic test and documentation is added as well. The test must be run on a target with NAND flash support and at least one resident SEAMA image in flash. Cc: Rafał Miłecki Signed-off-by: Linus Walleij

Merge tag 'u-boot-amlogic-20230131' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

2023-01-31T15:15:39Z

- jethub j100: add rescue boot from microSD - move meson sm command to cmd/meson and add efusedump sub-command - switch dwc2 otg to DM for G12A, GXL & AXG - Add new boards: - Odroid Go Ultra - Odroid-N2L

event: Correct dependencies on the EVENT framework

2023-01-18T17:46:13Z

The event framework is just that, a framework. Enabling it by itself does nothing, so we shouldn't ask the user about it. Reword (and correct typos) around this the option and help text. This also applies to DM_EVENT and EVENT_DYNAMIC. Only EVENT_DEBUG and CMD_EVENT should be visible to the user to select, when EVENT is selected. With this, it's time to address the larger problems. When functionality uses events, typically via EVENT_SPY, the appropriate framework then must be select'd and NOT imply'd. As the functionality will cease to work (and so, platforms will fail to boot) this is non-optional and where select is appropriate. Audit the current users of EVENT_SPY to have a more fine-grained approach to select'ing the framework where used. Also ensure the current users of event_register and also select EVENT_DYNAMIC. Cc: AKASHI Takahiro Cc: Heinrich Schuchardt Reported-by: Oliver Graute Reported-by: Francesco Dolcini Fixes: 7fe32b3442f0 ("event: Convert arch_cpu_init_dm() to use events") Fixes: 42fdcebf859f ("event: Convert misc_init_f() to use events") Fixes: c5ef2025579e ("dm: fix DM_EVENT dependencies") Signed-off-by: Tom Rini Tested-by: Simon Glass Reviewed-by: Simon Glass Reviewed-by: Fabio Estevam

cmd: mtdparts: add SYS_MTDPARTS_RUNTIME dependency on CONFIG_MTDIDS/MTDPARTS_DEFAULT

2023-01-11T16:54:50Z

The two configuration CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT are not needed with mtd configuration CONFIG_SYS_MTDPARTS_RUNTIME which allows the MTDIDS and MTDPARTS to be configured at runtime. This patch has no defconfig impacts because CONFIG_SYS_MTDPARTS_RUNTIME is only used by two platforms (stm32mp and igep00x0) which don't define CONFIG_MTDIDS_DEFAULT or CONFIG_MTDPARTS_DEFAULT. This patch solves an UBI environment load issue for NAND boot for stm32mp15 platform. In mtd_uboot.c, when GD_FLG_ENV_READY is not set, env_get_f() return a EMPTY string, define in default_environment[] because CONFIG_MTDIDS_DEFAULT="" and CONFIG_MTDPARTS_DEFAULT="", but a NULL pointer is expected to allow call of board_mtdparts_default. Without mtdparts, the env partition [CONFIG_ENV_UBI_PART="UBI"] is not found in env/ubi.c [CONFIG_ENV_IS_IN_UBI]. It is not a problem when env becomes ready, as these empty variables are removed form U-Boot environment in env_import() / himport_r(). Fixes: a331017c237c ("Complete migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT, include in environment") Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard

arm/mach-meson: move smc commands in cmd/meson

2023-01-10T14:27:17Z

It is incorrect to keep commands in the arch/ folder. Signed-off-by: Alexey Romanov Reviewed-by: Mattijs Korpershoek Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20230110105650.54580-3-avromanov@sberdevices.ru [narmstrong: moved after cmd/sound in index.rst] Signed-off-by: Neil Armstrong

Merge branch 'next'

2023-01-09T16:30:08Z

Signed-off-by: Tom Rini

cmd: net: wget: fix Kconfig dependency

2022-12-29T14:50:53Z

The wget command uses TCP, but fails to select PROT_TCP in Kconfig. Instead it selects the non-existing symbol TCP. Fix the typo. Signed-off-by: Michael Walle