u-boot.git/cmd/Makefile, branch v2020.07 Unnamed repository; edit this file 'description' to name the repository. acpi: Add an acpi command 2020-04-30T09:16:12+00:00 Simon Glass sjg@chromium.org 2020-04-26T15:19:53+00:00 0b885bcfd9b06943bf3dc3102f95961826b04f18 It is useful to dump ACPI tables in U-Boot to see what has been generated. Add a command to handle this. To allow the command to find the tables, add a position into the global data. Support subcommands to list and dump the tables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> 
It is useful to dump ACPI tables in U-Boot to see what has been generated.
Add a command to handle this.

To allow the command to find the tables, add a position into the global
data.

Support subcommands to list and dump the tables.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
cmd: Add unlz4 command 2020-04-17T16:32:12+00:00 Yusuke Ashiduka ashiduka@fujitsu.com 2020-02-20T11:48:01+00:00 a17322329b3b1526b23f8e1f6573a5d4f737c573 This command is a new command called "unlz4" that decompresses from memory into memory. Used with the CONFIG_CMD_UNLZ4 optionenabled. Signed-off-by: Yusuke Ashiduka <ashiduka@fujitsu.com> [trini: Use %zd / %zX not %ld / %lX in printf] Signed-off-by: Tom Rini <trini@konsulko.com> 
This command is a new command called "unlz4" that decompresses from memory
into memory.
Used with the CONFIG_CMD_UNLZ4 optionenabled.

Signed-off-by: Yusuke Ashiduka <ashiduka@fujitsu.com>
[trini: Use %zd / %zX not %ld / %lX in printf]
Signed-off-by: Tom Rini <trini@konsulko.com>
cmd: abootimg: Add abootimg command 2020-02-04T03:37:24+00:00 Sam Protsenko joe.skb7@gmail.com 2020-01-24T15:53:42+00:00 94f6d0d1bd602ffa520e5676177e770fcfe8472f This command can be used to extract fields and image payloads from Android Boot Image. It can be used for example to implement boot flow where dtb is taken from boot.img (as v2 incorporated dtb inside of boot.img). Using this command, one can obtain needed dtb blob from boot.img in scripting manner, and then apply needed dtbo's (from "dtbo" partition) on top of that, providing then the resulting image to bootm command in order to boot the Android. Also right now this command has the sub-command to get an address and size of recovery dtbo from recovery image (for non-A/B devices only, see [1,2] for details). It can be tested like this: => mmc dev 1 => part start mmc 1 boot_a boot_start => part size mmc 1 boot_a boot_size => mmc read $loadaddr $boot_start $boot_size => abootimg get ver => abootimg dump dtb [1] https://source.android.com/devices/bootloader/boot-image-header [2] https://source.android.com/devices/architecture/dto/partitions Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> 
This command can be used to extract fields and image payloads from
Android Boot Image. It can be used for example to implement boot flow
where dtb is taken from boot.img (as v2 incorporated dtb inside of
boot.img). Using this command, one can obtain needed dtb blob from
boot.img in scripting manner, and then apply needed dtbo's (from "dtbo"
partition) on top of that, providing then the resulting image to bootm
command in order to boot the Android.

Also right now this command has the sub-command to get an address and
size of recovery dtbo from recovery image (for non-A/B devices only,
see [1,2] for details).

It can be tested like this:

    => mmc dev 1
    => part start mmc 1 boot_a boot_start
    => part size mmc 1 boot_a boot_size
    => mmc read $loadaddr $boot_start $boot_size
    => abootimg get ver
    => abootimg dump dtb

[1] https://source.android.com/devices/bootloader/boot-image-header
[2] https://source.android.com/devices/architecture/dto/partitions

Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
cmd: add tlv_eeprom command 2020-01-21T14:56:15+00:00 Baruch Siach baruch@tkos.co.il 2020-01-21T13:44:54+00:00 1c79f2ff883633d634c57a564428da3502e48b6d Add support for read/write of ONIE "Tlvinfo" EEPROM data format. TLV stands for Type-Length-Value. The data format is described here: https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html#board-eeprom-information-format Based on U-Boot patch from the Open Compute project: https://github.com/opencomputeproject/onie/blob/ec87e872d46b9805565d2c6124b2f701ef1c07b1/patches/u-boot/common/feature-sys-eeprom-tlv-common.patch Keep only I2C EEPROM support. Use the generic eeprom driver. Fix checkpatch issues. Add support for multiple EEPROM TLV stores on the same system. This is useful in case of SOM and carrier that both provide ID and hardware configuration information. Add option to enable for SPL. This allows selection of RAM configuration based on EEPROM stored board identification. Signed-off-by: Baruch Siach <baruch@tkos.co.il> 
Add support for read/write of ONIE "Tlvinfo" EEPROM data format. TLV
stands for Type-Length-Value. The data format is described here:

  https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html#board-eeprom-information-format

Based on U-Boot patch from the Open Compute project:

  https://github.com/opencomputeproject/onie/blob/ec87e872d46b9805565d2c6124b2f701ef1c07b1/patches/u-boot/common/feature-sys-eeprom-tlv-common.patch

Keep only I2C EEPROM support. Use the generic eeprom driver. Fix
checkpatch issues.

Add support for multiple EEPROM TLV stores on the same system. This is
useful in case of SOM and carrier that both provide ID and hardware
configuration information.

Add option to enable for SPL. This allows selection of RAM configuration
based on EEPROM stored board identification.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
common: Drop floppy disk support 2020-01-17T18:26:50+00:00 Simon Glass sjg@chromium.org 2019-12-28T17:44:47+00:00 015e3348fc3f0f20fd9286bf245e26212568ec93 This seems pretty old now. It has not been converted to driver model and is not used by any boards. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> 
This seems pretty old now. It has not been converted to driver model and
is not used by any boards.

Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
dtimg/am57xx_evm_defconfig: Rename dtimg to adtimg 2020-01-10T19:18:26+00:00 Eugeniu Rosca roscaeugeniu@gmail.com 2019-12-24T16:51:06+00:00 b84acf10565af1578e68c533a36e629fe8b8e84a Rename the existing 'dtimg' command to 'adtimg', in order to: - Suggest the Android origins and scope - Be consistent with the upcoming 'abootimg' command (naming suggested by Simon [*]) The change in _not_ backward compatible, but its benefits outweigh its downsides, given that we don't expect active users of 'dtimg' today. Perform the rename in several steps: 1. Rename *.c file and Kconfig symbol. This should allow 'git log --follow' to properly track the history of 'adtimg.c' 2. 's/dtimg/adtimg/g' in the internal namespace of 'adtimg.c' ELF comparison [**] before and after shows no functional change. [*] https://patchwork.ozlabs.org/patch/1182212/#2291600 [**] diff -u <(objdump -d cmd/dtimg.o) <(objdump -d cmd/adtimg.o) Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Simon Glass<sjg@chromium.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> 
Rename the existing 'dtimg' command to 'adtimg', in order to:
 - Suggest the Android origins and scope
 - Be consistent with the upcoming 'abootimg' command (naming
   suggested by Simon [*])

The change in _not_ backward compatible, but its benefits outweigh its
downsides, given that we don't expect active users of 'dtimg' today.

Perform the rename in several steps:
 1. Rename *.c file and Kconfig symbol. This should allow
    'git log --follow' to properly track the history of 'adtimg.c'
 2. 's/dtimg/adtimg/g' in the internal namespace of 'adtimg.c'

ELF comparison [**] before and after shows no functional change.

[*] https://patchwork.ozlabs.org/patch/1182212/#2291600
[**] diff -u <(objdump -d cmd/dtimg.o) <(objdump -d cmd/adtimg.o)

Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Simon Glass<sjg@chromium.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
cmd: add rng command 2020-01-07T17:08:21+00:00 Heinrich Schuchardt xypron.glpk@gmx.de 2019-12-24T21:17:37+00:00 4f24ac08afccd5f51f0b4c7023fc8cf45efe8163 For the RNG uclass we currently only have a test working on the sandbox. Provide a command to test the hardware random number generator on non-sandbox systems. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> 
For the RNG uclass we currently only have a test working on the sandbox.

Provide a command to test the hardware random number generator on
non-sandbox systems.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
x86: sandbox: Add a PMC emulator and test 2019-12-15T03:44:11+00:00 Simon Glass sjg@chromium.org 2019-12-07T04:41:54+00:00 3b65ee34b908ce0c495c25987f5feb37ac163eab Add a simple PMC for sandbox to permit tests to run. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
Add a simple PMC for sandbox to permit tests to run.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
cmd: mdio/mii: add Kconfig help and allow break dependency 2019-12-09T15:47:42+00:00 Ramon Fried rfried.dev@gmail.com 2019-09-13T15:25:03+00:00 7d9701db40895ff5271220ae852d3631b4500219 * Add Kconfig help describing the purpose of each command. * Add CONFIG_CMD_MDIO so it could be selected individually, as it doesn't depend on the mii command. * Add Kconfig imply to mii to automatically select the mdio command. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
* Add Kconfig help describing the purpose of each command.
* Add CONFIG_CMD_MDIO so it could be selected individually, as
  it doesn't depend on the mii command.
* Add Kconfig imply to mii to automatically select the mdio
  command.

Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
cmd: sysboot: Create a sysboot command dedicated file 2019-12-06T21:44:18+00:00 Patrice Chotard patrice.chotard@st.com 2019-11-25T08:07:38+00:00 993c912d304d0aee0cd2f71ca4ff274741bf218c Extract all sysboot command related code from pxe.c to new sysboot.c Update Kconfig to insure that DISTRO_DEFAULT select new CMD_SYSBOOT command. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> 
Extract all sysboot command related code from pxe.c to new sysboot.c
Update Kconfig to insure that DISTRO_DEFAULT select new CMD_SYSBOOT
command.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>