This adds a new command 'addrmap' to display the address map for
non-identity virtual-physical memory mappings.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

Add the command "pwm" for controlling the pwm channels. This
command provides pwm invert/config/enable/disable functionalities
via PWM uclass drivers

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Add a 'mbr' command to let users create or verify MBR partition layout
based on the provided text description. The partition layout is
alternatively read from the 'mbr_parts' environment variable. This can be
used in scripts to help system image flashing tools to ensure proper
partition layout.

The syntax of the text description of the partition list is similar to
the one used by the 'gpt' command. Supported parameters are: name
(currently ignored), start (partition start offset in bytes), size (in
bytes or '-' to expand it to the whole free area), bootable (boolean
flag) and id (MBR partition type). If one wants to create more than 4
partitions, an 'Extended' primary partition (with 0x05 ID) has to be
explicitely provided as a one of the first 4 entries.

Here is an example how to create a 6 partitions (3 on the 'extended
volume'), some of the predefined sizes:

> setenv mbr_parts 'name=boot,start=4M,size=128M,bootable,id=0x0e;
  name=rootfs,size=3072M,id=0x83;
  name=system-data,size=512M,id=0x83;
  name=[ext],size=-,id=0x05;
  name=user,size=-,id=0x83;
  name=modules,size=100M,id=0x83;
  name=ramdisk,size=8M,id=0x83'
> mbr write mmc 0

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Implement the commands

* exception undefined - execute an illegal instruction
* exception sigsegv - cause a segment violation

Here is a possible output:

    => exception undefined
    Illegal instruction
    pc = 0x55eb8d0a7575, pc_reloc = 0x57575
    Resetting ...

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

- Bug fixes and updates on vid, ls1088a lx2160a and other layerscape
  platforms.
- Add optee_rpmb support for LX2 & Kontron sl28 support

This command lets the user list, select, and deselect mux controllers
introduced with the mux framework on the fly. It has 3 subcommands:
list, select, and deselect.

List: Lists all the mux present on the system. The muxes are listed for
each chip. The chip is identified by its device name. Each chip can have
a number of mux controllers. Each is listed in sequence and is assigned
a sequential ID based on its position in the mux chip. It lists details
like ID, whether the mux is currently selected or not, the current
state, the idle state, and the number of states.

A sample output would look something like:

=> mux list
a-mux-controller:
	ID	Selected	Current State	Idle State	Num States
	0	no        	unknown   	as-is     	0x4
	1	no        	0x2       	0x2       	0x10
	2	no        	0x73      	0x73      	0x100

another-mux-controller:
	ID	Selected	Current State	Idle State	Num States
        0       no              0x1             0x1             0x4
        1       no              0x2             0x2             0x4

Select: Selects a given mux and puts it in the specified state. This
subcommand takes 3 arguments: mux chip, mux ID, state to set
the mux in. The arguments mux chip and mux ID are used to identify which
mux needs to be selected, and then it is selected to the given state.
The mux needs to be deselected before it can be selected again in
another state. The state should be a hexadecimal number.

For example:
=> mux list
a-mux-controller:
        ID      Selected        Current State   Idle State      Num States
        0       no              0x1             0x1             0x4
        1       no              0x1             0x1             0x4
=> mux select a-mux-controller 0 0x3
=> mux list
a-mux-controller:
        ID      Selected        Current State   Idle State      Num States
        0       yes             0x3             0x1             0x4
        1       no              0x1             0x1             0x4

Deselect: Deselects a given mux and puts it in its idle state. This
subcommand takes 2 arguments: the mux chip and mux ID to identify which
mux needs to be deselected. So in the above example, we can deselect mux
0 using:

=> mux deselect a-mux-controller 0
=> mux list
a-mux-controller:
        ID      Selected        Current State   Idle State      Num States
        0       no              0x1             0x1             0x4
        1       no              0x1             0x1             0x4

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Enable the command "misc" for accessing miscellaneous devices with
a MISC uclass driver. The command provides listing all MISC devices
as well as read and write functionalities via their drivers.

Signed-off-by: Bin Meng <bin.meng@windriver.com>

CONFIG_CMD_TIMER merits a single file instead of co-exist in the
sleep command file.

Signed-off-by: Bin Meng <bin.meng@windriver.com>

The "cmd/Kconfig" has a TODO description for CMD_MISC that it should
really be named as CMD_SLEEP. Change it in the whole source tree.

Signed-off-by: Bin Meng <bin.meng@windriver.com>

Enable "optee_rpmb" command to write/read named persistent values
created on RPMB by opening session with OPTEE AVB TA.
This provides easy test for establishing a session with OPTEE
TA and storage of persistent data in MMC RPMB.

It includes following subcommands:

optee_rpmb read_pvalue:read persistent values on rpmb via OPTEE AVB TA
optee_rpmb write_pvalue:write persistent values on rpmb via OPTEE AVB
TA

Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>