u-boot.git/cmd/Makefile, branch v2023.04

Drop dataflash_mmc_mux command

2023-02-07T19:33:48+00:00

This is not used. Drop it.

Signed-off-by: Simon Glass 
Reviewed-by: Jaehoon Chung

cmd: Drop mfsl command

2023-02-07T19:33:48+00:00

This is not used anywhere. Drop it.

Signed-off-by: Simon Glass

cmd: Add a SEAMA image load command

2023-02-06T22:10:15+00:00

Add a command to load SEAMA (Seattle Image), a NAND flash
on-flash storage format.

This type of flash image is found in some D-Link routers such
as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and
DCH-M225, as well as in WD and NEC routers on the ath79
(MIPS), Broadcom BCM53xx, and RAMIPS platforms.

This U-Boot command will read and decode a SEAMA image from
raw NAND flash on any platform. As it is always using big endian
format for the data decoding is always necessary on platforms
such as ARM.

The command is needed to read a SEAMA-encoded boot image on the
D-Link DIR-890L router for boot from NAND flash in an upcoming
port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx)
architecture.

A basic test and documentation is added as well. The test must
be run on a target with NAND flash support and at least one
resident SEAMA image in flash.

Cc: Rafał Miłecki 
Signed-off-by: Linus Walleij

arm/mach-meson: move smc commands in cmd/meson

2023-01-10T14:27:17+00:00

It is incorrect to keep commands in the arch/ folder.

Signed-off-by: Alexey Romanov 
Reviewed-by: Mattijs Korpershoek 
Reviewed-by: Neil Armstrong 
Link: https://lore.kernel.org/r/20230110105650.54580-3-avromanov@sberdevices.ru
[narmstrong: moved after cmd/sound in index.rst]
Signed-off-by: Neil Armstrong

eficonfig: add UEFI Secure Boot Key enrollment interface

2022-11-22T11:00:45+00:00

This commit adds the menu-driven UEFI Secure Boot Key
enrollment interface. User can enroll PK, KEK, db
and dbx by selecting file.
Only the signed EFI Signature List(s) with an authenticated
header, typically '.auth' file, is accepted.

To clear the PK, KEK, db and dbx, user needs to enroll the null key
signed by PK or KEK.

Signed-off-by: Masahisa Kojima 
Reviewed-by: Ilias Apalodimas

FWU: cmd: Add a command to read FWU metadata

2022-10-31T18:47:33+00:00

Add a command to read the metadata as specified in the FWU
specification and print the fields of the metadata.

Signed-off-by: Sughosh Ganu 
Reviewed-by: Ilias Apalodimas 
Reviewed-by: Etienne Carriere

video: Add commands to list and change fonts

2022-10-30T19:01:40+00:00

Add a new 'font' command which allows the fonts to be listed as well as
selecting a different font and size.

Allow the test to run on sandbox, where multiple font/size combinations
are supported, as well as sandbox_flattree, where they are not.

Signed-off-by: Simon Glass

video: Move the console commands to cmd/

2022-10-30T18:55:22+00:00

Move these commands and the implementation to the cmd/ directory, which is
where most commands are kept.

Signed-off-by: Simon Glass 
Acked-by: Ilias Apalodimas 
[agust: keep vidconsole_position_cursor() in vidconsole uclass]
Signed-off-by: Anatolij Gustschin

cmd: add temperature command

2022-10-11T19:40:48+00:00

Currently, there is no way for users to check the readings from thermal
sensors from U-boot console, only some boards print it during boot.

So, lets add a simple "temperature" command that allows listing thermal
uclass devices and getting their value.

Note that the thermal devices are intenionally probed if list is used as
almost always they will not get probed otherwise and there is no way for
users to manually call probe on a certain device from console.

Assumption is made that temperature is returned in degrees C and not
milidegrees like in Linux as this is what most drivers seem to return.

Signed-off-by: Robert Marko 
Reviewed-by: Simon Glass

cmd: xxd: add new command

2022-10-11T19:40:48+00:00

Add xxd command to print file content as hexdump to standard out

Reviewed-by: Simon Glass 
Signed-off-by: Roger Knecht