u-boot.git/cmd/booti.c, branch v2020.04

image: Rename load_addr, save_addr, save_size

2020-01-17T19:02:35+00:00

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass

common: Move enable/disable_interrupts out of common.h

2019-12-02T23:25:01+00:00

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

cmd: booti: Store OS start and end info in images structure

2019-10-25T21:33:21+00:00

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla

RISCV: image: Add booti support

2019-05-09T08:47:52+00:00

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra 
Reviewed-by: Tom Rini 
Tested-by: Karsten Merker 
Reviewed-by: Marek Vasut

ARM: image: Add option for ignoring ep bit 3

2018-06-19T11:31:45+00:00

Add option to the booti_setup() which indicates to it that the caller
requires the image to be relocated to the beginning of the RAM and
that the information whether the image can be located anywhere in RAM
at 2 MiB aligned boundary or not is to be ignored. This is useful ie.
in case the Image is wrapped in another envelope, ie. fitImage and not
relocating it but moving it would corrupt the envelope.

Signed-off-by: Marek Vasut 
Cc: Bin Chen 
Cc: Masahiro Yamada 
Cc: Tom Rini 
Reviewed-By: Bin Chen

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR

2018-04-27T18:54:48+00:00

We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini

cmd: booti: fix invalid image address in debug message

2018-02-14T04:24:22+00:00

With commit 6808ef9ac2a6 ("move booti_setup to arch/arm/lig/image.c"),
images->ep has not been set at this point.

Fixes: 6808ef9ac2a6 ("move booti_setup to arch/arm/lig/image.c")
Signed-off-by: Masahiro Yamada 
Reviewed-by: Bin Chen

move booti_setup to arch/arm/lig/image.c

2018-02-08T03:06:11+00:00

Follow bootz's pattern by moving the booti_setup to arch/arm/lib.
This allows to use booti_setup in other paths, e.g booting
an Android image containing Image format.

Note that kernel relocation is move out of booti_setup and it is the
caller's responsibility to do it and allows them do it differently. say,
cmd/booti.c just do a manually, while in the bootm path, we can use
bootm_load_os(with some changes).

Signed-off-by: Bin Chen 
Reviewed-by: Tom Rini

arm64: booti: allow to place kernel image anywhere in physical memory

2017-03-15T00:40:23+00:00

At first, the ARM64 Linux booting requirement recommended that the
kernel image be placed text_offset bytes from 2MB aligned base near
the start of usable system RAM because memory below that base address
was unusable at that time.

This requirement was relaxed by Linux commit a7f8de168ace ("arm64:
allow kernel Image to be loaded anywhere in physical memory").
Since then, the bit 3 of the flags field indicates the tolerance
of the kernel physical placement.  If this bit is set, the 2MB
aligned base may be anywhere in physical memory.  For details, see
Documentation/arm64/booting.txt of Linux.

The booti command should be also relaxed.  If the bit 3 is set,
images->ep is respected, and the image is placed at the nearest
bootable location.  Otherwise, it is relocated to the start of the
system RAM to keep the original behavior.

Another wrinkle we need to take care of is the unknown endianness of
text_offset for a kernel older than commit a2c1d73b94ed (i.e. v3.16).
We can detect this based on the image_size field.  If the field is
zero, just use a fixed offset 0x80000.

Signed-off-by: Masahiro Yamada