u-boot.git/cmd/cpu.c, branch master

cmd: cpu: add release subcommand

2024-08-02T18:16:51+00:00

Add a new subcommand 'release' to bring up a core to run baremetal
and RTOS applications.

For example on i.MX8M Plus EVK, release the LAST core to run a RTOS
application, passing the sequence number of the CPU core to release,
here it is 3:
    u-boot=> cpu list
      0: cpu@0      NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 31C
      1: cpu@1      NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 30C
      2: cpu@2      NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 31C
      3: cpu@3      NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 31C

    u-boot=> load mmc 1:2 c0000000 /hello_world.bin
    66008 bytes read in 5 ms (12.6 MiB/s)
    u-boot=> dcache flush; icache flush
    u-boot=> cpu release 3 c0000000
    Released CPU core (mpidr: 0x3) to address 0xc0000000

Signed-off-by: Hou Zhiqiang 
Reviewed-by: Simon Glass

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

cmd: Remove and add needed includes

2024-05-06T21:05:04+00:00

Remove  from all "cmd/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini

cmd: Convert existing long help messages to the new macro

2023-10-16T14:24:58+00:00

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
  and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
  introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

Correct SPL uses of SYS_LONGHELP

2023-02-10T12:41:40+00:00

This converts 5 usages of this option to the non-SPL form, since there is
no SPL_SYS_LONGHELP defined in Kconfig

Signed-off-by: Simon Glass

common: Drop display_options.h from common header

2022-08-10T17:46:55+00:00

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass

cmd: cpu: migrate cpu command to U_BOOT_CMD_WITH_SUBCMDS()

2022-06-24T12:16:00+00:00

Migrate cpu command to use U_BOOT_CMD_WITH_SUBCMDS() helper macro, to
reduce duplicated code. This also fixes the cpu command on boards that
enable CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Ovidiu Panait 
Link: https://lore.kernel.org/r/20220531181435.3473549-1-ovpanait@gmail.com
Signed-off-by: Michal Simek

dm: Avoid accessing seq directly

2020-12-19T03:32:21+00:00

At present various drivers etc. access the device's 'seq' member directly.
This makes it harder to change the meaning of that member. Change access
to go through a function instead.

The drivers/i2c/lpc32xx_i2c.c file is left unchanged for now.

Signed-off-by: Simon Glass

dm: treewide: Rename ..._platdata variables to just ..._plat

2020-12-13T23:51:09+00:00

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass