u-boot.git/cmd/dfu.c, branch master

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

cmd: Remove and add needed includes

2024-05-06T21:05:04+00:00

Remove  from all "cmd/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini

cmd/dfu: Enable 'dfu list' command without DFU_OVER_USB

2022-02-11T16:29:23+00:00

Since dfu is not only used for USB, and some platform only
supports DFU_OVER_TFTP or EFI capsule update, dfu_alt_info
is defined on such platforms too.

For such platform, 'dfu list' command is useful to check
how the current dfu_alt_info setting is parsed.

Signed-off-by: Masami Hiramatsu

cmd: dfu: Propagate error if dfu gadget fails

2021-04-23T06:45:55+00:00

On systems without usb gadget dfu core fails which was reported by error
but command itself returns pass which breaks any usage in a script.
That's why propagate error from run_usb_dnl_gadget().

Fixes: 16297cfb2a20 ("usb: new board-specific USB init interface")
Signed-off-by: Michal Simek

dfu: add support for the dfu_alt_info reintialization from the flashed script

2021-01-31T13:08:56+00:00

Reinitialize DFU USB gadget after flashing the 'SCRIPT' entity to ensure
that the potential changes to the 'dfu_alt_info' environment variable are
applied.

Signed-off-by: Marek Szyprowski 
[lukma - I've moved the bool retry to avoid build (CI) errors]

command: Remove the cmd_tbl_t typedef

2020-05-18T22:36:55+00:00

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass

dfu: Add optional timeout parameter

2020-01-07T13:37:50+00:00

When the `dfu` command is called from the U-Boot environment,
it now accepts an optional parameter that specifies a timeout (in seconds).
If a DFU connection is not made within that time the `dfu` command exits
(as it would if Ctrl+C was pressed). If the timeout is left empty or being
zero the `dfu` command behaves as it does now.

This is useful for allowing U-Boot to check to see if anything wants to
upload new firmware before continuing to boot.

The patch is based on the commit
https://github.com/01org/edison-u-boot/commit/5e966ccc3c65c18c9783741fa04e0c45e021780c
by Sebastien Colleur, which has been heavily reworked due to U-Boot changes
in the past.

Signed-off-by: Brad Campbell 
Signed-off-by: Andy Shevchenko

dfu: Refactor do_dfu() to handle optional argument

2020-01-07T13:37:50+00:00

In the future we may utilize optional argument in 'dfu' command line.
As a preparation for this, refactor do_dfu().

Signed-off-by: Andy Shevchenko 
Acked-by: Lukasz Majewski

dfu: allow to manage DFU on several devices

2019-10-31T11:12:31+00:00

Add support of DFU for several interface/device
with one command.

The format for "dfu_alt_info" in this case is :
-  '='alternate list (';' separated)
- each interface is separated by '&'

The previous behavior is always supported.

One example for NOR (bootloaders) + NAND (rootfs in UBI):

U-Boot> env set dfu_alt_info \
"sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \
u-boot-env part 0 3&nand 0=UBI partubi 0,3"

U-Boot> dfu 0 list

DFU alt settings list:
dev: SF alt: 0 name: spl layout: RAW_ADDR
dev: SF alt: 1 name: ssbl layout: RAW_ADDR
dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR
dev: NAND alt: 3 name: UBI layout: RAW_ADDR

U-Boot> dfu 0

$> dfu-util -l

Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=3, name="UBI", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=1, name="u-boot", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=0, name="spl", serial="002700333338511934383330"

Signed-off-by: Patrick Delaunay