u-boot.git/cmd/sata.c, branch next

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

cmd: Remove and add needed includes

2024-05-06T21:05:04+00:00

Remove  from all "cmd/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini

blk: Switch over to using uclass IDs

2022-09-16T15:05:16+00:00

We currently have an if_type (interface type) and a uclass id. These are
closely related and we don't need to have both.

Drop the if_type values and use the uclass ones instead.

Maintain the existing, subtle, one-way conversion between UCLASS_USB and
UCLASS_MASS_STORAGE for now, and add a comment.

Signed-off-by: Simon Glass

global: Convert simple_strtoul() with decimal to dectoul()

2021-08-02T17:32:14+00:00

It is a pain to have to specify the value 10 in each call. Add a new
dectoul() function and update the code to use it.

Signed-off-by: Simon Glass

command: Remove the cmd_tbl_t typedef

2020-05-18T22:36:55+00:00

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass

common: Drop part.h from common header

2020-05-18T21:33:33+00:00

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass

cmd: sata: Add block unbind device function

2020-01-28T00:54:20+00:00

If we didn't unbind the sata from block device, the same devices would
be added after sata remove,
This patch is to resolve this issue as below:

=> sata info
SATA#0:
	(3.0 Gbps)
SATA#1:
	(3.0 Gbps)
Device 0: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005PY30
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
Device 1: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005VX30
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
=> sata stop
=> sata info
SATA#0:
	(3.0 Gbps)
SATA#1:
	(3.0 Gbps)
Device 0: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005PY300
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
Device 1: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005VX300
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
Device 2: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005PY300
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
Device 3: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005VX300
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)

Signed-off-by: Peng Ma 
Reviewed-by: Simon Glass

cmd: sata: add null pointer check for dev

2019-02-09T12:51:00+00:00

Calling sata_scan() with a null pointer probably won't make much sense.

Signed-off-by: Marcel Ziswiler 
Reviewed-by: Simon Glass

blk: Call part_init() in the post_probe() method

2018-11-14T17:16:27+00:00

part_init() is currently called in every DM BLK driver, either
in its bind() or probe() method. However we can use the BLK
uclass driver's post_probe() method to do it automatically.

Update all DM BLK drivers to adopt this change.

Signed-off-by: Bin Meng 
Reviewed-by: Simon Glass