u-boot.git/cmd/ti, branch master

Kconfig: cmd: restyle

2026-06-25T20:13:34Z

Restyle all Kconfigs for "cmd": Menu entries : no space left Menu attributes: 1 TAB Help text : 1 TAB + 2 spaces Replace '---help---' by 'help' Signed-off-by: Johan Jonker

treewide: move bi_dram[] from bd to gd

2026-06-25T00:13:24Z

Currently, the bi_dram[] information is stored in the board info structure (bd). Because bd is only valid after reserve_board(), dram_init_banksize() must be called late in the initialization process. This limitation is problematic, as it forces us to rely on a variety of bespoke functions to determine board RAM, bank memory sizes, and other early setup requirements. By moving bi_dram[] into the global data (gd), we can run it earlier. This is particularly convenient since boards define their own dram_init_banksize() routines, which do not always rely on parsing Device Tree (DT) memory nodes. Additionally, U-Boot defaults to relocating to the top of the first memory bank. While boards currently use custom functions to override this behavior, having the DRAM bank information available earlier in gd makes relocating to a different bank trivial and standardizes the process. Reviewed-by: Anshul Dalal Tested-by: Michal Simek # Versal Gen 2 Vek385 Tested-by: Anshul Dalal Reviewed-by: Simon Glass Signed-off-by: Ilias Apalodimas Tested-by: Christophe Leroy (CS GROUP)

cmd: ti: Add DDRSS Inline ECC Error Injection command

2025-10-15T21:08:27Z

Introduce a new version of the Keystone-II "ddr" command for testing the inline ECC support in the DDRSS bridge available on K3 devices. The ECC hardware support in K3's DDRSS and the test method differ substantially from what we support in the K2 variant of the command. This K3 DDRSS command currently supports only single controller testing. The ECC error injection procedure follows these steps: 1) Flush and disable the data cache. 2) Disable the protected ECC Rx range. 3) Flip a bit in the address. 4) Restore the range to original. 5) Read the modified value (corrected). 6) Re-enable the data cache. This will cause the 1-bit ECC error count to increase while the read will return the corrected value. The K3 version of the command extends the syntax for the "ecc_err" argument by also introducing an argument for range which specifies which range (0, 1, 2) the address is located in. Multi-bit ECC errors are uncorrectable and will lead to a synchronous abort. Signed-off-by: Georgi Vlaev Signed-off-by: Santhosh Kumar K [n-francis@ti.com: Add J7 and multiple-region support, simplify logic] Signed-off-by: Neha Malcom Francis Reviewed-by: Udit Kumar

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03Z

As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36Z

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

cmd: Remove and add needed includes

2024-05-06T21:05:04Z

Remove from all "cmd/" files and when needed add missing include files directly. Signed-off-by: Tom Rini

tree-wide: Replace http:// link with https:// link for ti.com

2023-11-10T16:01:50Z

Replace instances of http://www.ti.com with https://www.ti.com Signed-off-by: Nishanth Menon

cmd/ti: Update Kconfig logic and Makefile recursion logic

2023-10-16T14:25:02Z

- Add some dependencies to CMD_DDR3 as this is only valid on some platforms (which tend to select it as well). - The proper gate for going in to cmd/ti is not CONFIG_TI_COMMON_CMD_OPTIONS as nothing under there is controlled by that symbol but the general TI architecture options. Signed-off-by: Tom Rini

cmd: Convert existing long help messages to the new macro

2023-10-16T14:24:58Z

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines and use U_BOOT_LONGHELP to declare the same variable name as before - In a few places, either rename the variable to follow convention or introduce the variable as it was being done inline before. Signed-off-by: Tom Rini Reviewed-by: Simon Glass

Correct SPL uses of SYS_LONGHELP

2023-02-10T12:41:40Z

This converts 5 usages of this option to the non-SPL form, since there is no SPL_SYS_LONGHELP defined in Kconfig Signed-off-by: Simon Glass