u-boot.git/cmd/ti, branch next

cmd: ti: Add DDRSS Inline ECC Error Injection command

2025-10-15T21:08:27+00:00

Introduce a new version of the Keystone-II "ddr" command for testing the
inline ECC support in the DDRSS bridge available on K3 devices. The ECC
hardware support in K3's DDRSS and the test method differ substantially
from what we support in the K2 variant of the command. This K3 DDRSS
command currently supports only single controller testing.

The ECC error injection procedure follows these steps:
1) Flush and disable the data cache.
2) Disable the protected ECC Rx range.
3) Flip a bit in the address.
4) Restore the range to original.
5) Read the modified value (corrected).
6) Re-enable the data cache.

This will cause the 1-bit ECC error count to increase while the read
will return the corrected value.

The K3 version of the command extends the syntax for the "ecc_err"
argument by also introducing an argument for range which specifies which
range (0, 1, 2) the address is located in.

Multi-bit ECC errors are uncorrectable and will lead to a synchronous
abort.

Signed-off-by: Georgi Vlaev 
Signed-off-by: Santhosh Kumar K 
[n-francis@ti.com: Add J7 and multiple-region support, simplify logic]
Signed-off-by: Neha Malcom Francis 
Reviewed-by: Udit Kumar

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

cmd: Remove and add needed includes

2024-05-06T21:05:04+00:00

Remove  from all "cmd/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini

tree-wide: Replace http:// link with https:// link for ti.com

2023-11-10T16:01:50+00:00

Replace instances of http://www.ti.com with https://www.ti.com

Signed-off-by: Nishanth Menon

cmd/ti: Update Kconfig logic and Makefile recursion logic

2023-10-16T14:25:02+00:00

- Add some dependencies to CMD_DDR3 as this is only valid on some
  platforms (which tend to select it as well).
- The proper gate for going in to cmd/ti is not
  CONFIG_TI_COMMON_CMD_OPTIONS as nothing under there is controlled by
  that symbol but the general TI architecture options.

Signed-off-by: Tom Rini

cmd: Convert existing long help messages to the new macro

2023-10-16T14:24:58+00:00

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
  and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
  introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

Correct SPL uses of SYS_LONGHELP

2023-02-10T12:41:40+00:00

This converts 5 usages of this option to the non-SPL form, since there is
no SPL_SYS_LONGHELP defined in Kconfig

Signed-off-by: Simon Glass

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

2022-12-05T21:06:07+00:00

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

cmd: ti: ddr3: correct minor spelling mistake in Ti DDR3

2022-07-25T17:01:48+00:00

Just a spelling mistake.

Signed-off-by: Ramin Zaghi