<feed xmlns='http://www.w3.org/2005/Atom'>
<title>u-boot.git/cmd, branch v2016.07-rc2</title>
<subtitle>Unnamed repository; edit this file 'description' to name the repository.
</subtitle>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/'/>
<entry>
<title>autoboot: add CONFIG_AUTOBOOT to allow to not compile autoboot.c</title>
<updated>2016-06-20T09:19:09+00:00</updated>
<author>
<name>Masahiro Yamada</name>
<email>yamada.masahiro@socionext.com</email>
</author>
<published>2016-06-20T08:33:39+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=41598c82513672b1052c88ce816d98467345141f'/>
<id>41598c82513672b1052c88ce816d98467345141f</id>
<content type='text'>
Since commit bb597c0eeb7e ("common: bootdelay: move CONFIG_BOOTDELAY
into a Kconfig option"), CONFIG_BOOTDELAY is defined for all boards.

Prior to that commit, it was allowed to unset CONFIG_BOOTDELAY to
not compile common/autoboot.c, as described in common/Makefile:

  # This option is not just y/n - it can have a numeric value
  ifdef CONFIG_BOOTDELAY
  obj-y += autoboot.o
  endif

It was a bit odd to enable/disable code with an integer type option,
but it was how this option worked before that commit, and several
boards actually unset it to opt out of the autoboot feature.

This commit adds a new bool option, CONFIG_AUTOBOOT, and makes
CONFIG_BOOTDELAY depend on it.

I chose "default y" for this option because most boards use the
autoboot.  I added "# CONFIG_AUTOBOOT is not set" for the boards that
had not set CONFIG_BOOTDELAY prior to the bad commit.

Signed-off-by: Masahiro Yamada &lt;yamada.masahiro@socionext.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Since commit bb597c0eeb7e ("common: bootdelay: move CONFIG_BOOTDELAY
into a Kconfig option"), CONFIG_BOOTDELAY is defined for all boards.

Prior to that commit, it was allowed to unset CONFIG_BOOTDELAY to
not compile common/autoboot.c, as described in common/Makefile:

  # This option is not just y/n - it can have a numeric value
  ifdef CONFIG_BOOTDELAY
  obj-y += autoboot.o
  endif

It was a bit odd to enable/disable code with an integer type option,
but it was how this option worked before that commit, and several
boards actually unset it to opt out of the autoboot feature.

This commit adds a new bool option, CONFIG_AUTOBOOT, and makes
CONFIG_BOOTDELAY depend on it.

I chose "default y" for this option because most boards use the
autoboot.  I added "# CONFIG_AUTOBOOT is not set" for the boards that
had not set CONFIG_BOOTDELAY prior to the bad commit.

Signed-off-by: Masahiro Yamada &lt;yamada.masahiro@socionext.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge git://git.denx.de/u-boot-nand-flash</title>
<updated>2016-06-20T09:15:52+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2016-06-20T09:15:52+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=2313d48445e59f063ec9a3b4940fe8252737db76'/>
<id>2313d48445e59f063ec9a3b4940fe8252737db76</id>
<content type='text'>
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
</pre>
</div>
</content>
</entry>
<entry>
<title>nand: extend nand torture</title>
<updated>2016-06-20T00:25:12+00:00</updated>
<author>
<name>Max Krummenacher</name>
<email>max.oss.09@gmail.com</email>
</author>
<published>2016-06-13T08:15:48+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=1866be7d28ce807397e4aedd93f70564ac8bebc0'/>
<id>1866be7d28ce807397e4aedd93f70564ac8bebc0</id>
<content type='text'>
nand torture currently works on exactly one nand block which is specified
by giving the byteoffset to the beginning of the block.

Extend this by allowing for a second parameter specifying the byte size
to be tested.

e.g.
==&gt; nand torture 1000000

NAND torture: device 0 offset 0x1000000 size 0x20000 (block size 0x20000)
 Passed: 1, failed: 0

==&gt; nand torture 1000000 40000

NAND torture: device 0 offset 0x1000000 size 0x40000 (block size 0x20000)
 Passed: 2, failed: 0

Signed-off-by: Max Krummenacher &lt;max.krummenacher@toradex.com&gt;
Reviewed-by: Benoît Thébaudeau &lt;benoit.thebaudeau.dev@gmail.com&gt;
[scottwood: fix usage to show size as optional, and add misssing braces]
Signed-off-by: Scott Wood &lt;oss@buserror.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
nand torture currently works on exactly one nand block which is specified
by giving the byteoffset to the beginning of the block.

Extend this by allowing for a second parameter specifying the byte size
to be tested.

e.g.
==&gt; nand torture 1000000

NAND torture: device 0 offset 0x1000000 size 0x20000 (block size 0x20000)
 Passed: 1, failed: 0

==&gt; nand torture 1000000 40000

NAND torture: device 0 offset 0x1000000 size 0x40000 (block size 0x20000)
 Passed: 2, failed: 0

Signed-off-by: Max Krummenacher &lt;max.krummenacher@toradex.com&gt;
Reviewed-by: Benoît Thébaudeau &lt;benoit.thebaudeau.dev@gmail.com&gt;
[scottwood: fix usage to show size as optional, and add misssing braces]
Signed-off-by: Scott Wood &lt;oss@buserror.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'master' of git://git.denx.de/u-boot-usb</title>
<updated>2016-06-19T03:46:21+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2016-06-19T03:46:21+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=a10a31ec91ad2ee514a42baea9314553aa972676'/>
<id>a10a31ec91ad2ee514a42baea9314553aa972676</id>
<content type='text'>
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;

Conflicts:
	arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;

Conflicts:
	arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
</pre>
</div>
</content>
</entry>
<entry>
<title>cmd: usb: check if_type before using this device</title>
<updated>2016-06-17T22:48:31+00:00</updated>
<author>
<name>Peng Fan</name>
<email>van.freenix@gmail.com</email>
</author>
<published>2016-06-17T06:18:11+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=7839f5f8092762f048076c6c7b010c10f2ee8a0b'/>
<id>7839f5f8092762f048076c6c7b010c10f2ee8a0b</id>
<content type='text'>
For legacy usb storage driver, USB_MAX_STOR_DEV is defined as 7.
If we only have one usb disk on board, `usb dev 0` is ok.
But if `usb dev 1`, still ok, then `usb read xxx` will trigger
system fault and reboot.

So check if_type before using this device.

Signed-off-by: Peng Fan &lt;peng.fan@nxp.com&gt;
Cc: Simon Glass &lt;sjg@chromium.org&gt;
Cc: Hans de Goede &lt;hdegoede@redhat.com&gt;
Cc: Bin Meng &lt;bmeng.cn@gmail.com&gt;
Cc: Marek Vasut &lt;marex@denx.de&gt;
Cc: Stefan Roese &lt;sr@denx.de&gt;
Cc: Marcel Ziswiler &lt;marcel.ziswiler@toradex.com&gt;
Cc: Peng Fan &lt;peng.fan@nxp.com&gt;
Cc: Stephen Warren &lt;swarren@nvidia.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
For legacy usb storage driver, USB_MAX_STOR_DEV is defined as 7.
If we only have one usb disk on board, `usb dev 0` is ok.
But if `usb dev 1`, still ok, then `usb read xxx` will trigger
system fault and reboot.

So check if_type before using this device.

Signed-off-by: Peng Fan &lt;peng.fan@nxp.com&gt;
Cc: Simon Glass &lt;sjg@chromium.org&gt;
Cc: Hans de Goede &lt;hdegoede@redhat.com&gt;
Cc: Bin Meng &lt;bmeng.cn@gmail.com&gt;
Cc: Marek Vasut &lt;marex@denx.de&gt;
Cc: Stefan Roese &lt;sr@denx.de&gt;
Cc: Marcel Ziswiler &lt;marcel.ziswiler@toradex.com&gt;
Cc: Peng Fan &lt;peng.fan@nxp.com&gt;
Cc: Stephen Warren &lt;swarren@nvidia.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>cmd: gpt: add - partition size parsing</title>
<updated>2016-06-12T17:14:57+00:00</updated>
<author>
<name>Michael Trimarchi</name>
<email>michael@amarulasolutions.com</email>
</author>
<published>2016-06-08T08:18:16+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=666362356e1ccc0df91c03b1d3f97939968b9c04'/>
<id>666362356e1ccc0df91c03b1d3f97939968b9c04</id>
<content type='text'>
This patch try to parse name=userdata,size=-,uuid=${uuid_gpt_userdata};

gpt mmc write 0 $partitions
gpt mmc verify 0 $partitions

Signed-off-by: Michael Trimarchi &lt;michael@amarulasolutions.com&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This patch try to parse name=userdata,size=-,uuid=${uuid_gpt_userdata};

gpt mmc write 0 $partitions
gpt mmc verify 0 $partitions

Signed-off-by: Michael Trimarchi &lt;michael@amarulasolutions.com&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ubi: add new ubi command "ubi detach"</title>
<updated>2016-06-09T17:53:11+00:00</updated>
<author>
<name>Heiko Schocher</name>
<email>hs@denx.de</email>
</author>
<published>2016-06-07T06:55:40+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=cddfc97d1fc892353d6616cd4287c34c454941e6'/>
<id>cddfc97d1fc892353d6616cd4287c34c454941e6</id>
<content type='text'>
simple detachs ubi from the mtd partition.

Signed-off-by: Heiko Schocher &lt;hs@denx.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
simple detachs ubi from the mtd partition.

Signed-off-by: Heiko Schocher &lt;hs@denx.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>efi_loader: Move to normal debug infrastructure</title>
<updated>2016-06-06T17:39:16+00:00</updated>
<author>
<name>Alexander Graf</name>
<email>agraf@suse.de</email>
</author>
<published>2016-06-02T09:38:27+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=edcef3ba1d2d5beb92fcd7df253e196e77ba174d'/>
<id>edcef3ba1d2d5beb92fcd7df253e196e77ba174d</id>
<content type='text'>
We introduced special "DEBUG_EFI" defines when the efi loader
support was new. After giving it a bit of thought, turns out
we really didn't have to - the normal #define DEBUG infrastructure
works well enough for efi loader as well.

So this patch switches to the common debug() and #define DEBUG
way of printing debug information.

Signed-off-by: Alexander Graf &lt;agraf@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
We introduced special "DEBUG_EFI" defines when the efi loader
support was new. After giving it a bit of thought, turns out
we really didn't have to - the normal #define DEBUG infrastructure
works well enough for efi loader as well.

So this patch switches to the common debug() and #define DEBUG
way of printing debug information.

Signed-off-by: Alexander Graf &lt;agraf@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>efi_loader: Add exit support</title>
<updated>2016-06-06T17:39:15+00:00</updated>
<author>
<name>Alexander Graf</name>
<email>agraf@suse.de</email>
</author>
<published>2016-05-20T21:28:23+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=a86aeaf228da739bce6bc40927949efc33672050'/>
<id>a86aeaf228da739bce6bc40927949efc33672050</id>
<content type='text'>
Some times you may want to exit an EFI payload again, for example
to default boot into a PXE installation and decide that you would
rather want to boot from the local disk instead.

This patch adds exit functionality to the EFI implementation, allowing
EFI payloads to exit.

Signed-off-by: Alexander Graf &lt;agraf@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Some times you may want to exit an EFI payload again, for example
to default boot into a PXE installation and decide that you would
rather want to boot from the local disk instead.

This patch adds exit functionality to the EFI implementation, allowing
EFI payloads to exit.

Signed-off-by: Alexander Graf &lt;agraf@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_data</title>
<updated>2016-06-04T01:27:48+00:00</updated>
<author>
<name>Scott Wood</name>
<email>oss@buserror.net</email>
</author>
<published>2016-05-30T18:57:56+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=17cb4b8f327eb983cef7c510fcf77f1635a00e48'/>
<id>17cb4b8f327eb983cef7c510fcf77f1635a00e48</id>
<content type='text'>
These functions are part of the Linux 4.6 sync.  They are being added
before the main sync patch in order to make it easier to address the
issue across all NAND drivers (many/most of which do not closely track
their Linux counterparts) separately from other merge issues.

Signed-off-by: Scott Wood &lt;oss@buserror.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
These functions are part of the Linux 4.6 sync.  They are being added
before the main sync patch in order to make it easier to address the
issue across all NAND drivers (many/most of which do not closely track
their Linux counterparts) separately from other merge issues.

Signed-off-by: Scott Wood &lt;oss@buserror.net&gt;
</pre>
</div>
</content>
</entry>
</feed>
