u-boot.git/cmd, branch v2020.10-rc2

Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig

2020-08-08T15:03:52+00:00

This converts the following to Kconfig:
   CONFIG_SYS_MMC_ENV_DEV
   CONFIG_SYS_MMC_ENV_PART

Note that with this conversion we now have consistent behavior with
respect to ensuring that we have always selected the correct MMC
device and hardware partition.

Signed-off-by: Tom Rini

fs/squashfs: add filesystem commands

2020-08-08T02:31:32+00:00

Add 'ls' and 'load' commands.

Signed-off-by: Joao Marcos Costa

cmd: Update the memory-search command

2020-08-08T02:31:32+00:00

Add various fixes and improvements to this command that were missed in
the original version. Unfortunately I forgot to send v2.

- Fix Kconfig name
- Use a separate variable for the remaining search length
- Correct a minor bug
- Move into a separate test suite
- Add -q flag to the 'quiet' test to test operation when console is enabled
- Enable the feature for sandbox

Signed-off-by: Simon Glass

cmd: bdinfo: Move sram info prints to generic code

2020-08-06T18:26:35+00:00

bi_sramstart and bi_sramsize are generic members of the bd_info structure,
so move the m68k/powerpc-specific prints to generic code. Also, print them
only if SRAM support is enabled via CONFIG_SYS_HAS_SRAM.

Reviewed-by: Simon Glass 
Signed-off-by: Ovidiu Panait

mvebu: bubt: Drop dead code

2020-08-06T12:12:14+00:00

The code around CONFIG_SYS_MMC_ENV_PART has been untested since merge.
This can be seen by it referencing 'mmc->part_num' which was migrated
elsewhere prior to this code being merged.

Cc: Joel Johnson 
Cc: Stefan Roese 
Signed-off-by: Tom Rini 
Acked-by: Stefan Roese 
Reviewed-by: Stefan Roese

cmd: mvebu/bubt: Drop unused SPI_FLASH_PROTECTION

2020-08-06T12:12:14+00:00

SPI_FLASH_PROTECTION config item is never used in anywhere
in the U-Boot tree.

Drop it.

Signed-off-by: Jagan Teki 
Reviewed-by: Stefan Roese

cmd: bdinfo: cleanup phys_addr_t output

2020-08-05T12:18:34+00:00

We currently print the memory size with at least 8 hexadecimal digits.
This creates a ragged output on 64 bit boards, e.g. on a Kendryte K210:

DRAM bank   = 0x0000000000000002
-> start    = 0x0000000080600000
-> size     = 0x0000000000200000
memstart    = 0x0000000000000000
memsize     = 0x00000000
flashstart  = 0x0000000000000000
flashsize   = 0x0000000000000000
flashoffset = 0x0000000000000000

All other numbers are printed with the number of digits needed for the type
ulong. So use this value as minimum number of digits (precision) for
printing physical addresses.

Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Heiko Schocher 
Reviewed-by: Stefan Roese 
Reviewed-by: Simon Glass

cmd: bootz: fix device-tree overlap test

2020-08-05T12:18:34+00:00

The address of the kernel image is stored in images->ep. zi_start is the
offset of execution entry in the image, which is usually 0 for ARM
zImage.

Fixes boot error when ftd is stored near RAM address 0x0:

ERROR: FDT image overlaps OS image (OS=0x0..0x5fd608)

Fixes: fbde7589ce30 ("common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image")
Cc: Tero Kristo 
Signed-off-by: Baruch Siach

lmb/bdinfo: dump lmb info via bdinfo

2020-08-05T03:30:02+00:00

Dump lmb status from the bdinfo command. This is useful for seeing the
reserved memory regions from the u-boot cmdline.

Signed-off-by: Tero Kristo

cmd: add clone command

2020-08-05T03:29:59+00:00

This patch adds a feature for block device cloning similar to dd
command, this should be useful for boot-strapping a device where
usb gadget or networking is not available. For instance one can
clone a factory image into a blank emmc from an external sd card.

Signed-off-by: John Chau