u-boot.git/cmd, branch v2023.07-rc2 Unnamed repository; edit this file 'description' to name the repository. cmd: tlv_eeprom: enable 'dev' subcommand before 'read' 2023-05-08T08:47:13+00:00 Josua Mayer josua@solid-run.com 2023-05-05T08:20:49+00:00 fa0af90a0ebd3557490640798ea4f5fad211d382 Move the handler for "tlv_eeprom dev X" command to the beginning of do_tlv_eeprom, to allow using it before issuing a "read" command for currently selected eeprom. Also remove the check if eeprom exists, since that can only work after the first execution of read_eeprom triggered device lookup. Instead accept values up to the defined array size (MAX_TLV_DEVICES). Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> 
Move the handler for "tlv_eeprom dev X" command to the beginning of
do_tlv_eeprom, to allow using it before issuing a "read" command for
currently selected eeprom.

Also remove the check if eeprom exists, since that can only work after
the first execution of read_eeprom triggered device lookup.
Instead accept values up to the defined array size (MAX_TLV_DEVICES).

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
cmd: tlv_eeprom: handle -ENODEV error from read_eeprom function 2023-05-08T08:47:11+00:00 Josua Mayer josua@solid-run.com 2023-05-05T08:20:48+00:00 f6eff35b8c19dba52519fa0bbd0977787a9dbe8b When tlv eeprom does not exist, return error code instead of quietly making up tlv structure in memory. Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> 
When tlv eeprom does not exist, return error code instead of quietly
making up tlv structure in memory.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
cmd: tlv_eeprom: remove use of global variable has_been_read 2023-05-08T08:47:08+00:00 Josua Mayer josua@solid-run.com 2023-05-05T08:20:47+00:00 425d963dac7b5c54046774d836b5153574f7b9ba has_been_read is only used as an optimization for do_tlv_eeprom. Explicitly use and set inside this function, thus making read_eeprom stateless. Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> 
has_been_read is only used as an optimization for do_tlv_eeprom.
Explicitly use and set inside this function, thus making read_eeprom
stateless.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
cmd: tlv_eeprom: remove use of global variable current_dev 2023-05-08T08:47:05+00:00 Josua Mayer josua@solid-run.com 2023-05-05T08:20:46+00:00 dfda0c0140483260ccfc40f5f412238ee0bb90c5 Make tlv_eeprom command device selection an explicit parameter of all function calls. Signed-off-by: Josua Mayer <josua@solid-run.com> Cc: Stefan Roese <sr@denx.de> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> 
Make tlv_eeprom command device selection an explicit parameter of all
function calls.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
net: ipv6: Add support for default gateway discovery. 2023-05-05T21:58:52+00:00 Ehsan Mohandesi emohandesi@linux.microsoft.com 2023-04-22T00:08:21+00:00 6de98b60ba89fb96a3adada11a5b5406f3b3786b In IPv6, the default gateway and prefix length are determined by receiving a router advertisement as defined in - https://www.rfc-editor.org/rfc/rfc4861. Add support for sending router solicitation (RS) and processing router advertisements (RA). If the RA has prefix info option and following conditions are met, then gatewayip6 and net_prefix_length of ip6addr env variables are initialized. These are later consumed by IPv6 code for non-local destination IP. - "Router Lifetime" != 0 - Prefix is NOT link-local prefix (0xfe80::/10) - L flag is 1 - "Valid Lifetime" != 0 Timing Parameters: - MAX_RTR_SOLICITATION_DELAY (0-1s) - RTR_SOLICITATION_INTERVAL (4s) (min retransmit delay) - MAX_RTR_SOLICITATIONS (3 RS transmissions) The functionality is enabled by CONFIG_IPV6_ROUTER_DISCOVERY and invoked automatically from net_init_loop(). Signed-off-by: Ehsan Mohandesi <emohandesi@linux.microsoft.com> Tested-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>Reviewed-by: Tested-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Tested-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Sergei Antonov <saproj@gmail.com> 
In IPv6, the default gateway and prefix length are determined by receiving
a router advertisement as defined in -
https://www.rfc-editor.org/rfc/rfc4861.

Add support for sending router solicitation (RS) and processing router
advertisements (RA).

If the RA has prefix info option and following conditions are met, then
gatewayip6 and net_prefix_length of ip6addr env variables are initialized.
These are later consumed by IPv6 code for non-local destination IP.

- "Router Lifetime" != 0
- Prefix is NOT link-local prefix (0xfe80::/10)
- L flag is 1
- "Valid Lifetime" != 0

Timing Parameters:
- MAX_RTR_SOLICITATION_DELAY (0-1s)
- RTR_SOLICITATION_INTERVAL (4s) (min retransmit delay)
- MAX_RTR_SOLICITATIONS (3 RS transmissions)

The functionality is enabled by CONFIG_IPV6_ROUTER_DISCOVERY and invoked
automatically from net_init_loop().

Signed-off-by: Ehsan Mohandesi <emohandesi@linux.microsoft.com>
Tested-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>Reviewed-by:
Tested-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Tested-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Sergei Antonov <saproj@gmail.com>
net: add fastboot TCP support 2023-05-05T21:48:44+00:00 Dmitrii Merkurev dimorinny@google.com 2023-04-12T18:49:30+00:00 443d319180a68156ca152d164f446e6789004c1d Known limitations are 1. fastboot reboot doesn't work (answering OK but not rebooting) 2. flashing isn't supported (TCP transport only limitation) The command syntax is fastboot tcp Signed-off-by: Dmitrii Merkurev <dimorinny@google.com> Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Simon Glass <sjg@chromium.org> Сс: Joe Hershberger <joe.hershberger@ni.com> Сс: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
Known limitations are
1. fastboot reboot doesn't work (answering OK but not rebooting)
2. flashing isn't supported (TCP transport only limitation)

The command syntax is
fastboot tcp

Signed-off-by: Dmitrii Merkurev <dimorinny@google.com>
Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Сс: Joe Hershberger <joe.hershberger@ni.com>
Сс: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
net: dhcp6: pxe: Add DHCP/PXE commands for IPv6 2023-05-05T21:48:44+00:00 Sean Edmond seanedmond@microsoft.com 2023-04-11T17:48:47+00:00 7d0188927bcf4f6ce74ccfca43f0f081a39ade00 Adds commands to support DHCP and PXE with IPv6. New configs added: - CMD_DHCP6 - DHCP6_PXE_CLIENTARCH - DHCP6_PXE_DHCP_OPTION - DHCP6_ENTERPRISE_ID New commands added (when IPv6 is enabled): - dhcp6 - pxe get -ipv6 - pxe boot -ipv6 Signed-off-by: Sean Edmond <seanedmond@microsoft.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> 
Adds commands to support DHCP and PXE with IPv6.

New configs added:
- CMD_DHCP6
- DHCP6_PXE_CLIENTARCH
- DHCP6_PXE_DHCP_OPTION
- DHCP6_ENTERPRISE_ID

New commands added (when IPv6 is enabled):
- dhcp6
- pxe get -ipv6
- pxe boot -ipv6

Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
net: ipv6: IPv6 environment variable cleanup 2023-05-05T17:41:55+00:00 Sean Edmond seanedmond@microsoft.com 2023-02-16T04:38:36+00:00 5e541c48a7d34e6b6e426bf5b50d7111d7e680f6 Fix "setenv gatewayip6". Synchronize IPv6 local variables with environment variables in netboot_update_env() Signed-off-by: Sean Edmond <seanedmond@microsoft.com> 
Fix "setenv gatewayip6".

Synchronize IPv6 local variables with environment variables
in netboot_update_env()

Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
Merge tag 'video-for-v2023.07-rc2' of https://source.denx.de/u-boot/custodians/u-boot-video 2023-05-05T13:36:08+00:00 Tom Rini trini@konsulko.com 2023-05-05T13:36:08+00:00 ab75996ba49c140c529f14b5c40d0d16430feefb - enable video support in SPL - support splash screen for TI am62x - replace #ifdef and #if with if's in bmp/splash - add lm3533 backlight driver - add Solomon SSD2825 DSI/LVDS bridge driver - add Renesas R61307 and R69328 MIPI DSI panel drivers - add tegra DC based PWM backlight driver - add generic endeavoru (HTC One X) panel driver 
 - enable video support in SPL
 - support splash screen for TI am62x
 - replace #ifdef and #if with if's in bmp/splash
 - add lm3533 backlight driver
 - add Solomon SSD2825 DSI/LVDS bridge driver
 - add Renesas R61307 and R69328 MIPI DSI panel drivers
 - add tegra DC based PWM backlight driver
 - add generic endeavoru (HTC One X) panel driver
cmd: bdinfo: Print ethaddr of current MAC 2023-05-03T22:30:46+00:00 Marek Vasut marek.vasut+renesas@mailbox.org 2023-04-22T13:01:33+00:00 a76315052b93e73444c4703b610660ccbd38deda Instead of always printing ethaddr of MAC 0, print eth%daddr of the current MAC. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org> 
Instead of always printing ethaddr of MAC 0, print eth%daddr of the current MAC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>