u-boot.git/common/Kconfig, branch v2015.04

common/armflash: Support for ARM flash images

2015-04-10T15:54:08+00:00

The ARM reference designs all use a special flash image format
that stores a footer (two versions exist) at the end of the last
erase block of the image in flash memory.

Version one of the footer is indicated by the magic number
0xA0FFFF9F at 12 bytes before the end of the flash block and
version two is indicated by the magic number 0x464F4F54 0x464C5348
(ASCII for "FLSHFOOT") in the very last 8 bytes of the erase block.

This command driver implements support for both versions of the
AFS images (the name comes from the Linux driver in drivers/mtd/afs.c)
and makes it possible to list images and load an image by name into
the memory with these commands:

afs - lists flash contents
afs load  - loads image to address indicated in the image
afs load   - loads image to a specified address

This image scheme is used on the ARM Integrator family, ARM
Versatile family, ARM RealView family (not yet supported in U-Boot)
and ARM Versatile Express family up to and including the new
Juno board for 64 bit development.

Reviewed-by: Tom Rini 
Signed-off-by: Linus Walleij

kconfig: common: Fix memtest bool name

2015-03-05T14:23:39+00:00

Fix the name appearing in menuconfig for memtest command

Signed-off-by: Nikolaos Pasaloukos 
Cc: Masahiro Yamada

kconfig: remove unneeded dependency on !SPL_BUILD

2015-02-24T22:06:27+00:00

Now CONFIG_SPL_BUILD is not defined in Kconfig, so
"!depends on SPL_BUILD" and "if !SPL_BUILD" are redundant.

Signed-off-by: Masahiro Yamada

dm: Add CMD_DM and CMD_DEMO to Kconfig

2015-02-12T17:35:34+00:00

Add Kconfig settings for these two options.

Signed-off-by: Simon Glass 
Reviewed-by: Masahiro Yamada

commands: add more command entries in Kconfig

2014-11-23T11:49:03+00:00

This commit adds some of command entries (CONFIG_CMD_*) to
cover include/config_cmd_default.h and a little extra.

Because U-Boot supports lots of commands, they should be categorized
according to their usage.

Signed-off-by: Masahiro Yamada

hush: add CONFIG_HUSH_PARSER to Kconfig

2014-11-23T11:49:03+00:00

The README file states that the macros beginning with "CONFIG_SYS_"
depend on the hardware etc. and should not be meddled with if you do
not what you're doing.
We have already screwed up with this policy; we have given the prefix
"CONFIG_SYS_" to many user-selectable configurations.
Here, "CONFIG_SYS_HUSH_PARSER" is one of them.  Users can enable it
if they want to use a more powerful command line parser, or disable it
if they only need a simple one.

This commit attempts to rename CONFIG_SYS_HUSH_PARSER to
CONFIG_HUSH_PARSER and move it to Kconfig.

Every board maintainer is expected to enable CONFIG_HUSH_PARSER
(= add "CONFIG_HUSH_PARSER=y" to his defconfig file) and remove
"#define CONFIG_SYS_HUSH_PARSER" from his header file.

Signed-off-by: Masahiro Yamada

kconfig: move CONFIG_CMD_IMPORTENV to Kconfig

2014-09-24T22:30:29+00:00

Since CONFIG_CMD_IMPORTENV is defined in config_cmd_defaults.h,
it should be enabled for all the boards except bf506f-ezkit
that undefs it explicitely.

Signed-off-by: Masahiro Yamada 
Acked-by: Simon Glass 
Tested-by: Simon Glass

kconfig: move CONFIG_CMD_GO to Kconfig

2014-09-24T22:30:28+00:00

Since CONFIG_CMD_GO is defined in config_cmd_defaults.h
(and no board undefs it its own header), it can be moved to
Kconfig with the default value "y".

Signed-off-by: Masahiro Yamada 
Acked-by: Simon Glass 
Tested-by: Simon Glass

kconfig: move CONFIG_CMD_EXPORTENV to Kconfig

2014-09-24T22:30:28+00:00

Since CONFIG_CMD_EXPORTENV is defined in config_cmd_defaults.h,
it should be enabled for all the boards except bf506f-ezkit
that undefs it explicitely.

Signed-off-by: Masahiro Yamada 
Acked-by: Simon Glass 
Tested-by: Simon Glass

kconfig: move CONFIG_CMD_CRC32 to Kconfig

2014-09-24T22:30:28+00:00

Since CONFIG_CMD_CRC32 is defined in config_cmd_defaults.h,
it is enabled for all the boards except the ones undefining it
explicitly:
  kwb
  tseries_mmc
  tseries_nand
  tseries_spi
  vct_platinum_onenand_small
  vct_platinum_small
  vct_platinumavc_onenand_small
  vct_platinumavc_small
  vct_premium_onenand_small
  vct_premium_small

The default value of this config option should be "y" and
"# CONFIG_CMD_CRC32 is not set" should be added for those exceptions.

Signed-off-by: Masahiro Yamada 
Acked-by: Simon Glass