u-boot.git/common/Kconfig, branch v2015.07

common: Add CMD_SF Kconfig entry

2015-07-01T15:45:04+00:00

Added Kconfig entry for CMD_SF.

Signed-off-by: Jagan Teki

Move defaults from config_cmd_default.h to Kconfig

2015-06-26T02:18:34+00:00

This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.

Signed-off-by: Joe Hershberger 
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini

common: Add the CMD_ENV_EXISTS config to Kconfig

2015-06-25T21:04:51+00:00

This command needs to exist in the Kconfig so that it can be moved from
the config_cmd_default.h.

Signed-off-by: Joe Hershberger

common: Fix comment for saveenv in Kconfig

2015-06-25T21:04:47+00:00

The help for this was simply copied from another command.

Update it to reflect the command.

Signed-off-by: Joe Hershberger

autoboot.c: Add feature to stop autobooting via SHA256 encrypted password

2015-06-08T21:32:40+00:00

This patch adds the feature to only stop the autobooting, and therefor
boot into the U-Boot prompt, when the input string / password matches
a values that is encypted via a SHA256 hash and saved in the environment.

This feature is enabled by defined these config options:
     CONFIG_AUTOBOOT_KEYED
     CONFIG_AUTOBOOT_STOP_STR_SHA256

Signed-off-by: Stefan Roese 
Reviewed-by: Simon Glass

autoboot.c: Move config options to Kconfig

2015-06-08T21:32:16+00:00

This patch moves the following config options to Kconfig:

CONFIG_AUTOBOOT_KEYED
CONFIG_AUTOBOOT_PROMPT
CONFIG_AUTOBOOT_DELAY_STR
CONFIG_AUTOBOOT_STOP_STR
AUTOBOOT_KEYED_CTRLC

Signed-off-by: Stefan Roese 
Reviewed-by: Simon Glass 
[trini: Drop ip04 and pm9263 configs/ additions, those boards previously
 set CONFIG_AUTOBOOT_PROMPT but never used it, re-run savedefconfig over
 all boards that did change. Make digsy_mtc_* string include seconds to
 match others and not warn. ]
Signed-off-by: Tom Rini 
Cc: Masahiro Yamada

net: Move the CMD_NET config to defconfigs

2015-06-01T14:40:15+00:00

This also selects CONFIG_NET for any CONFIG_CMD_NET board.

Remove the imx default for CONFIG_NET.

This moves the config that was defined by 60296a8 (commands: add more
command entries in Kconfig).

Signed-off-by: Joe Hershberger

Move setexpr to Kconfig

2015-06-01T14:39:29+00:00

Another shell scripting command that has not been moved.

Moved using tools/moveconfig.py using these settings:

CMD_SETEXPR bool n y

Signed-off-by: Joe Hershberger 
Cc: Masahiro Yamada

dm: regulator: add regulator command

2015-05-15T00:49:37+00:00

This command is based on driver model regulator's API.
The user interface provides:
- list UCLASS regulator devices
- show or [set] operating regulator device
- print constraints info
- print operating status
- print/[set] voltage value [uV] (force)
- print/[set] current value [uA]
- print/[set] operating mode id
- enable the regulator output
- disable the regulator output

The 'force' option can be used for setting the value which exceeds
the constraints min/max limits.

Signed-off-by: Przemyslaw Marczak 
Acked-by: Simon Glass

dm: pmic: add pmic command

2015-05-15T00:49:37+00:00

This is new command for the PMIC devices based on driver model PMIC API.
Command features are unchanged:
- list UCLASS pmic devices
- show or [set] operating pmic device (NEW)
- dump registers
- read byte of register at address
- write byte to register at address

The only one change for this command is 'dev' subcommand.

Signed-off-by: Przemyslaw Marczak 
Acked-by: Simon Glass