u-boot.git/common/Kconfig, branch v2020.04 Unnamed repository; edit this file 'description' to name the repository. rockchip: Enable pre console for rk3399 2020-04-02T13:49:16+00:00 Jagan Teki jagan@amarulasolutions.com 2020-04-02T11:41:23+00:00 61853a7ac7e167d90899ec4e99d2e07db7bc72c1 Enable pre console buffer for rk3399 platform. This would help to capture the console messages prior to the console being initialised. Enabling this would help to capture all the console messages on video output source like HDMI. So we can find the full console messages of U-Boot proper on HDMI display when enabled it for RK3399 platform boards. Buffer address used for pre console is 0x0f200000 which is ram base plus 240MiB. right now the Allwinner SoC is using similar computation. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> 
Enable pre console buffer for rk3399 platform.

This would help to capture the console messages prior to
the console being initialised. Enabling this would help
to capture all the console messages on video output source
like HDMI. So we can find the full console messages of
U-Boot proper on HDMI display when enabled it for RK3399
platform boards.

Buffer address used for pre console is 0x0f200000 which is
ram base plus 240MiB. right now the Allwinner SoC is using
similar computation.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
rockchip: rk3288: Enable pre console buffer 2020-02-19T08:45:38+00:00 Jagan Teki jagan@amarulasolutions.com 2020-01-23T14:12:19+00:00 38070170b8b991230297ddce317ace11e1606629 Enable pre console buffer for rk3288 platform. This would help to capture the console messages prior to the console being initialised. Enabling this would help to capture all the console messages on video output source like HDMI. So we can find the full console messages of U-Boot proper on HDMI display when enabled it for RK3288 platform boards. Buffer address used for pre console is 0x0f000000 which is ram base plus 240MiB. right now the Allwinner SoC is using similar computation. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> 
Enable pre console buffer for rk3288 platform.

This would help to capture the console messages prior to
the console being initialised. Enabling this would help
to capture all the console messages on video output source
like HDMI. So we can find the full console messages of
U-Boot proper on HDMI display when enabled it for RK3288
platform boards.

Buffer address used for pre console is 0x0f000000 which is
ram base plus 240MiB. right now the Allwinner SoC is using
similar computation.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Kconfig: update LOGLEVEL range 2020-02-11T03:14:18+00:00 Marek Bykowski marek.bykowski@gmail.com 2020-02-03T10:43:32+00:00 2aa69c9b9d4511d35b372715d6ea4ccebb75a526 As LOGLEVEL ranges form 0 to 9 set the limit to 10. Signed-off-by: Marek Bykowski <marek.bykowski@gmail.com> 
As LOGLEVEL ranges form 0 to 9 set the limit to 10.

Signed-off-by: Marek Bykowski <marek.bykowski@gmail.com>
mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND 2019-12-04T04:04:10+00:00 Miquel Raynal miquel.raynal@bootlin.com 2019-10-03T17:50:03+00:00 88718be3001055fa2801a44ab10570279b3f2cb7 Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> 
Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
common: Kconfig: Fix typo in TPL_LOG_CONSOLE description 2019-10-31T11:22:53+00:00 Simon South simon@simonsouth.net 2019-10-02T14:55:06+00:00 54b6abae3ae9dd181044ddd52429b4df5505872f Signed-off-by: Simon South <simon@simonsouth.net> 
Signed-off-by: Simon South <simon@simonsouth.net>
Convert CONFIG_SHOW_BOOT_PROGRESS to Kconfig 2019-08-02T15:17:58+00:00 Simon Glass sjg@chromium.org 2019-07-21T02:51:12+00:00 9f53146f396d9def8013e29e105729c1f42ae037 This converts the following to Kconfig: CONFIG_SHOW_BOOT_PROGRESS Signed-off-by: Simon Glass <sjg@chromium.org> 
This converts the following to Kconfig:
   CONFIG_SHOW_BOOT_PROGRESS

Signed-off-by: Simon Glass <sjg@chromium.org>
common: Implement A/B metadata 2019-07-24T17:16:29+00:00 Ruslan Trofymenko ruslan.trofymenko@linaro.org 2019-07-05T12:37:32+00:00 d65e8da92ee7d594226aeee04eb0bef5d60f8bda This patch determines the A/B-specific bootloader message structure that is the basis for implementation of recovery and A/B update functions. A/B metadata is stored in this structure and used to decide which slot should we use to boot the device. Also some basic functions for A/B metadata manipulation are implemented (like slot selection). The patch was extracted from commits [1], [2] with some coding style fixes. [1] https://android-review.googlesource.com/c/platform/external/u-boot/+/729878/2 [2] https://android-review.googlesource.com/c/platform/external/u-boot/+/729880/2 Signed-off-by: Ruslan Trofymenko <ruslan.trofymenko@linaro.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> 
This patch determines the A/B-specific bootloader message structure
that is the basis for implementation of recovery and A/B update
functions. A/B metadata is stored in this structure and used to decide
which slot should we use to boot the device. Also some basic functions
for A/B metadata manipulation are implemented (like slot selection).

The patch was extracted from commits [1], [2] with some coding style
fixes.

[1] https://android-review.googlesource.com/c/platform/external/u-boot/+/729878/2
[2] https://android-review.googlesource.com/c/platform/external/u-boot/+/729880/2

Signed-off-by: Ruslan Trofymenko <ruslan.trofymenko@linaro.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
bootstage: Add support for TPL record count 2019-07-10T22:52:58+00:00 Simon Glass sjg@chromium.org 2019-05-18T17:59:52+00:00 59d0452df36c92015eb68163519f1581e68d6392 If bootstage is enabled in TPL it lacks a record count and so does not build. Fix this by adding a new Kconfig option. Signed-off-by: Simon Glass <sjg@chromium.org> 
If bootstage is enabled in TPL it lacks a record count and so does not
build. Fix this by adding a new Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
common: Fix a typo abnove -> above 2019-06-14T20:10:48+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2019-06-12T12:35:24+00:00 69264f499305bb40d1a3eda6428b96651bfc05db Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> 
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
stm32mp1: migrate PREBOOT to Kconfig 2019-05-23T09:36:46+00:00 Patrick Delaunay patrick.delaunay@st.com 2019-04-18T15:32:38+00:00 ce3772ca8d337c071c1028b8cae16765c098bca9 Use Kconfig to activate CONFIG_PREBOOT (empty by default). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 
Use Kconfig to activate CONFIG_PREBOOT (empty by default).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>