u-boot.git/common/Makefile, branch v2016.05

common: env: support sata device

2016-04-18T16:29:14+00:00

Introduce env support for sata device.
1. Implement write_env/read_env/env_relocate_spec/saveenv/sata_get_env_dev
2. If want to enable this feature, define CONFIG_ENV_IS_IN_SATA, and
   define CONFIG_SYS_SATA_ENV_DEV or implement your own sata_get_ev_dev.

Signed-off-by: Peng Fan 
Cc: Simon Glass 
Cc: Joe Hershberger 
Cc: Bin Meng 
Cc: Stefan Roese 
Cc: Heiko Schocher 
Cc: Stuart Longland 
Cc: Maxime Ripard 
Cc: Tom Rini 
Reviewed-by: Tom Rini

Allow command-line files to be dropped

2016-03-22T16:16:11+00:00

These files do not need to be compiled when CONFIG_CMDLINE is disabled.
Update the Makefile to reflect this.

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

fdt: Allow libfdt to be used in SPL

2016-03-14T23:18:26+00:00

Add an option to enable libfdt in SPL. This can be useful when decoding
FIT files in SPL.

We need to make sure this option is not enabled in SPL by this change.
Also this option needs to be enabled in host builds. Si add a new
IMAGE_USE_LIBFDT #define which can be used in files that are built on the
host but must also build for U-Boot and SPL.

Signed-off-by: Simon Glass

Kconfig: Move CONFIG_FIT and related options to Kconfig

2016-03-14T23:18:07+00:00

There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass 
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini

common: Add support for environment file in EXT4.

2016-03-14T18:18:39+00:00

This is an enhancement that permits storing the environment file on an
EXT4 partition such as the root filesystem.  It is based on the existing
FAT environment file code.

Remove unused CONFIG_MODEM_SUPPORT option and associated dead code.

2016-02-08T15:22:44+00:00

Signed-off-by: David Müller

Move all command code into its own directory

2016-01-25T15:39:43+00:00

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng 
Reviewed-by: Heiko Schocher 
Acked-by: Stefan Roese 
Acked-by: Przemyslaw Marczak

dm: lcd: Avoid using the lcd.h header file with driver model

2016-01-21T02:10:15+00:00

The LCD functions and definitions are not used with the driver model video
uclass. When all boards are converted over we can remove the file. For now,
use #ifdef to omit the contents.

Signed-off-by: Simon Glass 
Acked-by: Anatolij Gustschin

common/Makefile: Compile fdt_support is enabled in SPL

2015-12-05T23:22:27+00:00

When CONFIG_SPL_OF_TRANSLATE is enabled fdt_support.c needs to get
compiled. Otherwise fdt_translate_address() is missing which is needed
in dev_get_addr().

Signed-off-by: Stefan Roese 
Cc: Simon Glass 
Acked-by: Simon Glass

sparse: Rename the file and header

2015-11-12T18:18:59+00:00

The Android sparse image format is currently supported through a file
called aboot, which isn't really such a great name, since the sparse image
format is only used for transferring data with fastboot.

Rename the file and header to a file called "sparse", which also makes it
consistent with the header defining the image structures.

Signed-off-by: Maxime Ripard 
Reviewed-by: Tom Rini