u-boot.git/common/Makefile, branch v2017.07 Unnamed repository; edit this file 'description' to name the repository. bootstage: Support SPL 2017-06-05T18:13:08+00:00 Simon Glass sjg@chromium.org 2017-05-22T11:05:35+00:00 824bb1b45371efcb10561456e894d7c2fa1a4b88 At present bootstage only supports U-Boot proper. But SPL can also consume boot time so it is useful to have the record start there. Add bootstage support to SPL. Also support stashing the timing information when SPL finishes so that it can be picked up and reported by U-Boot proper. This provides a full boot time record, excluding only the time taken by the boot ROM. Signed-off-by: Simon Glass <sjg@chromium.org> 
At present bootstage only supports U-Boot proper. But SPL can also consume
boot time so it is useful to have the record start there.

Add bootstage support to SPL. Also support stashing the timing information
when SPL finishes so that it can be picked up and reported by U-Boot
proper. This provides a full boot time record, excluding only the time
taken by the boot ROM.

Signed-off-by: Simon Glass <sjg@chromium.org>
Kconfig: Add a CONFIG_IDE option 2017-05-22T16:45:27+00:00 Simon Glass sjg@chromium.org 2017-05-17T09:25:30+00:00 fc843a02acad62e231a3e779cebd1712688146fc At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate CONFIG_IDE option so that IDE support can be enabled without requiring the 'ide' command. Update existing users and move the ide driver into drivers/block since it should not be in common/. Signed-off-by: Simon Glass <sjg@chromium.org> 
At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate
CONFIG_IDE option so that IDE support can be enabled without requiring
the 'ide' command.

Update existing users and move the ide driver into drivers/block since
it should not be in common/.

Signed-off-by: Simon Glass <sjg@chromium.org>
Kconfig: Add CONFIG_HASH to enable hashing API 2017-05-22T16:38:22+00:00 Simon Glass sjg@chromium.org 2017-05-17T15:05:34+00:00 d70f919e49c9105c49427786a1731feae322cb7a At present CONFIG_CMD_HASH enables the 'hash' command which also brings in the hashing API. Some boards may wish to enable the API without the command. Add a separate CONFIG to permit this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> 
At present CONFIG_CMD_HASH enables the 'hash' command which also brings
in the hashing API. Some boards may wish to enable the API without the
command. Add a separate CONFIG to permit this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
common: Only build cli_readline.o for CMDLINE on non-SPL 2017-05-12T12:37:33+00:00 Tom Rini trini@konsulko.com 2017-05-09T02:14:34+00:00 82b9dc63db41ab7601a4caa31922ac58bf1160ef With gcc-6 and later we may get a warning such as: .../common/cli_readline.c:20:21: warning: ‘tab_seq’ defined but not used [-Wunused-const-variable=] static const char tab_seq[] = " "; /* used to expand TABs */ ^~~~~~~ .../common/cli_readline.c:19:19: warning: ‘erase_seq’ defined but not used [-Wunused-const-variable=] static const char erase_seq[] = "\b \b"; /* erase sequence */ ^~~~~~~~~ Because in SPL we're normally not doing interactive commands anyhow, so lets just not compile this at all in SPL. This also means that we need to correct the logic (and comment) about what the drivers/ddr/fsl/ and CONFIG_FSL_DDR_INTERACTIVE requires and this will be included in SPL there. Signed-off-by: Tom Rini <trini@konsulko.com> 
With gcc-6 and later we may get a warning such as:
.../common/cli_readline.c:20:21: warning: ‘tab_seq’ defined but not used [-Wunused-const-variable=]
 static const char   tab_seq[] = "        "; /* used to expand TABs */
                     ^~~~~~~
.../common/cli_readline.c:19:19: warning: ‘erase_seq’ defined but not used [-Wunused-const-variable=]
 static const char erase_seq[] = "\b \b"; /* erase sequence */
                   ^~~~~~~~~

Because in SPL we're normally not doing interactive commands anyhow, so
lets just not compile this at all in SPL.  This also means that we need
to correct the logic (and comment) about what the drivers/ddr/fsl/ and
CONFIG_FSL_DDR_INTERACTIVE requires and this will be included in SPL
there.

Signed-off-by: Tom Rini <trini@konsulko.com>
spl: fdt: support for fdt fixup for falcon boot 2017-05-12T02:04:26+00:00 B, Ravi ravibabu@ti.com 2017-04-18T11:57:26+00:00 984a3c8777071700a5935758d0d542e7b3f97bb0 Adding support for fdt fixup to update the memory node in device tree for falcon boot. This is needed for single stage or falcon bootmode, to pass memory configuration to kernel through DT memory node. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> 
Adding support for fdt fixup to update the
memory node in device tree for falcon boot.

This is needed for single stage or falcon
bootmode, to pass memory configuration to
kernel through DT memory node.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
flash: compile common/flash.c iif CONFIG_MTD_NO_FLASH is enabled 2017-02-12T19:30:31+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2017-02-11T13:43:55+00:00 554c73c0256c9e22af1b89e842a310b73b5eb657 The whole of common/flash.c is guarded by #if defined() ... #endif. Move the conditional to common/Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 
The whole of common/flash.c is guarded by #if defined() ... #endif.
Move the conditional to common/Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
common: dfu: saperate the dfu common functionality 2016-09-27T21:30:18+00:00 B, Ravi ravibabu@ti.com 2016-07-28T12:09:15+00:00 05341a87646aceac90a63624fbd5fa620f8dc263 The cmd_dfu functionality is been used by both SPL and u-boot, saperating the core dfu functionality moving it to common/dfu.c. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> 
The cmd_dfu functionality is been used by both SPL and
u-boot, saperating the core dfu functionality moving
it to common/dfu.c.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
spl: dfu: add dfu support in SPL 2016-09-27T21:30:17+00:00 B, Ravi ravibabu@ti.com 2016-07-28T12:09:14+00:00 bc5dbcb91813a429d168de58b37cb5b291d7be75 Traditionally the DFU support is available only as part 2nd stage boot loader(u-boot) and DFU is not supported in SPL. The SPL-DFU feature is useful for boards which does not have MMC/SD, ethernet boot mechanism to boot the board and only has USB inteface. This patch add DFU support in SPL with RAM memory device support to load and execute u-boot. And then leverage full functionality DFU in u-boot to flash boot inital binary images to factory or bare-metal boards to memory devices like SPI, eMMC, MMC/SD card using USB interface. This SPL-DFU support can be enabled through Menuconfig->Boot Images->Enable SPL-DFU support Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> 
Traditionally the DFU support is available only
as part 2nd stage boot loader(u-boot) and DFU
is not supported in SPL.

The SPL-DFU feature is useful for boards which
does not have MMC/SD, ethernet boot mechanism
to boot the board and only has USB inteface.

This patch add DFU support in SPL with RAM
memory device support to load and execute u-boot.
And then leverage full functionality DFU in
u-boot to flash boot inital binary images to
factory or bare-metal boards to memory devices
like SPI, eMMC, MMC/SD card using USB interface.

This SPL-DFU support can be enabled through
Menuconfig->Boot Images->Enable SPL-DFU support

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Use separate options for TPL support 2016-09-16T21:03:39+00:00 Simon Glass sjg@chromium.org 2016-09-13T05:18:25+00:00 76f1f38816d8763b51e5f1d6ca099a88aa1fd077 At present TPL uses the same options as SPL support. In a few cases the board config enables or disables the SPL options depending on whether CONFIG_TPL_BUILD is defined. With the move to Kconfig, options are determined for the whole build and (without a hack like an #undef in a header file) cannot be controlled in this way. Create new TPL options for these and update users. This will allow Kconfig conversion to proceed for these boards. Signed-off-by: Simon Glass <sjg@chromium.org> 
At present TPL uses the same options as SPL support. In a few cases the board
config enables or disables the SPL options depending on whether
CONFIG_TPL_BUILD is defined.

With the move to Kconfig, options are determined for the whole build and
(without a hack like an #undef in a header file) cannot be controlled in this
way.

Create new TPL options for these and update users. This will allow Kconfig
conversion to proceed for these boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
cmd: Split 'bootz' and 'booti' out from 'bootm' 2016-08-20T15:35:07+00:00 Tom Rini trini@konsulko.com 2016-08-12T12:31:15+00:00 5db28905c952560843212236963e9f711341cad5 The bootz and booti commands rely on common functionality that is found in common/bootm.c and common/bootm_os.c. They do not however rely on the rest of cmd/bootm.c to be implemented so split them into their own files. Have various Makefiles include the required infrastructure for CONFIG_CMD_BOOT[IZ] as well as CONFIG_CMD_BOOTM. Move the declaration of 'images' over to common/bootm.c. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com> 
The bootz and booti commands rely on common functionality that is found
in common/bootm.c and common/bootm_os.c.  They do not however rely on
the rest of cmd/bootm.c to be implemented so split them into their own
files.  Have various Makefiles include the required infrastructure for
CONFIG_CMD_BOOT[IZ] as well as CONFIG_CMD_BOOTM.  Move the declaration
of 'images' over to common/bootm.c.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Tom Rini <trini@konsulko.com>