u-boot.git/common/Makefile, branch v2017.09

Move environment files from common/ to env/

2017-08-15T12:18:45+00:00

About a quarter of the files in common/ relate to the environment. It
seems better to put these into their own subdirectory and remove the
prefix.

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds

2017-08-13T15:12:21+00:00

To allow for a finer-grained control of features for TPL and SPL
builds all modules/boot-methods/etc. need to be consistently selected
based on the $(SPL_TPL_) macros.

This allows splitting the associated config-options in Kconfig: we
don't split the Kconfig options here and now, as this should happen on
an as-needed basis, whenever someone needs a feature/boot-method/etc.
in their TPL.

Signed-off-by: Philipp Tomsich 
Reviewed-by: Simon Glass 
Reviewed-by: Tom Rini

spl: make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN

2017-07-27T12:59:03+00:00

Some platforms have very limited SRAM to run SPL code, so there may
not be the same amount space for a malloc pool before relocation in
the SPL stage as the normal U-Boot stage.

Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN,
so the size of pre-relocation malloc pool can be configured memory
space independently.

Signed-off-by: Andy Yan 
Reviewed-by: Tom Rini 
Acked-by: Philipp Tomsich 
Reviewed-by: Philipp Tomsich 
[fixed up commit-message:]
Signed-off-by: Philipp Tomsich

scsi: Move drivers into new drivers/scsi directory

2017-07-11T16:08:19+00:00

At present we have the SCSI drivers in the drivers/block and common/
directories. It is better to split them out into their own place. Use
drivers/scsi which is what Linux does.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

sata: Move drivers into new drivers/ata directory

2017-07-11T16:08:19+00:00

At present we have the SATA and PATA drivers mixed up in the drivers/block
directory. It is better to split them out into their own place. Use
drivers/ata which is what Linux does.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

Kconfig: Add CONFIG_SATA to enable SATA

2017-07-11T16:08:19+00:00

At present CONFIG_CMD_SATA enables the 'sata' command which also brings
in SATA support. Some boards may wish to enable SATA without the command.
Add a separate CONFIG to permit this.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

boot_fit: Create helper functions that can be used to select DTB out of FIT

2017-07-10T18:25:50+00:00

Some platforms may append a FIT image to the U-boot image. This function
aids in parsing the FIT image and selecting the correct DTB at runtime.

Signed-off-by: Franklin S Cooper Jr 
Reviewed-by: Tom Rini

spl: fit: Break out some functions into a common file

2017-07-10T18:24:39+00:00

Some of the functions within spl_fit will be used for non spl purposes.
Instead of duplicating functions simply break the functions to be reused
into its own file.

Signed-off-by: Franklin S Cooper Jr 
Reviewed-by: Tom Rini 
Reviewed-by: Simon Glass 
[trini: Only add the new define to image.h, otherwise we see breakage
due to massive include leakage into host tools in some cases]
Signed-off-by: Tom Rini

bootstage: Support SPL

2017-06-05T18:13:08+00:00

At present bootstage only supports U-Boot proper. But SPL can also consume
boot time so it is useful to have the record start there.

Add bootstage support to SPL. Also support stashing the timing information
when SPL finishes so that it can be picked up and reported by U-Boot
proper. This provides a full boot time record, excluding only the time
taken by the boot ROM.

Signed-off-by: Simon Glass

Kconfig: Add a CONFIG_IDE option

2017-05-22T16:45:27+00:00

At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate
CONFIG_IDE option so that IDE support can be enabled without requiring
the 'ide' command.

Update existing users and move the ide driver into drivers/block since
it should not be in common/.

Signed-off-by: Simon Glass