u-boot.git/common/Makefile, branch v2018.03

dfu: Rename _FUNCTION_DFU to DFU_OVER_

2018-02-21T19:28:15+00:00

Do the following to make the symbol names less confusing.

sed -i "s/\([TU][^_]\+\)_FUNCTION_DFU/DFU_OVER_\1/g" \
	`git grep _FUNCTION_DFU | cut -d ":" -f 1 | sort -u`

Signed-off-by: Marek Vasut 
Cc: Lukasz Majewski

dfu: Fix up the Kconfig mess

2018-02-21T19:28:15+00:00

Clean up the screaming mess of configuration options that DFU is.
It was impossible to configure DFU such that TFTP is enabled and
USB is not, this patch fixes that and assures that DFU TFTP and
DFU USB can be enabled separatelly and that the correct pieces
of code are compiled in.

Signed-off-by: Marek Vasut 
Cc: Lukasz Majewski

common: do not compile common fastboot code when building the SPL

2018-01-12T09:11:23+00:00

This is not required as fastboot can't be started from SPL.

Signed-off-by: Jean-Jacques Hiblot

log: Add a console driver

2017-12-07T20:17:00+00:00

It is useful to display log messages on the console. Add a simple driver
to handle this.

Note that this driver outputs to the console, which may be serial or
video. It does not specifically select serial output.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

log: Add an implementation of logging

2017-12-07T20:17:00+00:00

Add the logging header file and implementation with some configuration
options to control it.

Signed-off-by: Simon Glass

dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig

2017-10-06T01:31:04+00:00

CONFIG_FIT_EMBED might be confused with CONFIG_OF_EMBED, rename it
MULTI_DTB_FIT as it is able to get a DTB from a FIT image containing
multiple DTBs. Also move the option to the Kconfig dedicated to the DTS
options and create a README for this feature.

Signed-off-by: Jean-Jacques Hiblot 
Reviewed-by: Tom Rini 
Reviewed-by: Simon Glass

bootstage: adjust Makefile to allow including bootstage in SPL, but not in TPL

2017-09-18T18:40:33+00:00

For timing our bootstages on the RK3368, which has a minimal TPL
(and where we consequently don't want to time the bootstages) and a
full-featured SPL (where we can bootstage recording), we need to
adjust the Makefile.

Use the $(SPL_TPL_) macro in the Makefile for bootstage.o

Signed-off-by: Philipp Tomsich 
Reviewed-by: Simon Glass 
Acked-by: Philipp Tomsich

Move environment files from common/ to env/

2017-08-15T12:18:45+00:00

About a quarter of the files in common/ relate to the environment. It
seems better to put these into their own subdirectory and remove the
prefix.

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds

2017-08-13T15:12:21+00:00

To allow for a finer-grained control of features for TPL and SPL
builds all modules/boot-methods/etc. need to be consistently selected
based on the $(SPL_TPL_) macros.

This allows splitting the associated config-options in Kconfig: we
don't split the Kconfig options here and now, as this should happen on
an as-needed basis, whenever someone needs a feature/boot-method/etc.
in their TPL.

Signed-off-by: Philipp Tomsich 
Reviewed-by: Simon Glass 
Reviewed-by: Tom Rini

spl: make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN

2017-07-27T12:59:03+00:00

Some platforms have very limited SRAM to run SPL code, so there may
not be the same amount space for a malloc pool before relocation in
the SPL stage as the normal U-Boot stage.

Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN,
so the size of pre-relocation malloc pool can be configured memory
space independently.

Signed-off-by: Andy Yan 
Reviewed-by: Tom Rini 
Acked-by: Philipp Tomsich 
Reviewed-by: Philipp Tomsich 
[fixed up commit-message:]
Signed-off-by: Philipp Tomsich