u-boot.git/common/bootm.c, branch v2017.01

bootm: fix passing argc to standalone apps

2016-10-02T00:04:37+00:00

This bug appears in b6396403 which makes u-boot unable to pass
arguments via bootm to a standalone application without this patch.

Steps to reproduce.

Compile a u-boot. Use mkimage to package the standalone hello_world.bin
file.

e.g. For the MIPS Boston platform

mkimage -n "hello" -A mips -O u-boot -C none -T standalone \
     -a 0xffffffff80200000 -d hello_world.bin \
     -ep 0xffffffff80200000 hello_out

Then tftp hello_out and run it using

boston # dhcp 192.168.154.45:hello_out
...
boston # bootm $loadaddr 123 321

Without the patch the following output is observed.

boston # bootm $loadaddr 123 321
   Image Name:   hello
   Image Type:   MIPS U-Boot Standalone Program (uncompressed)
   Data Size:    1240 Bytes = 1.2 KiB
   Load Address: 80200000
   Entry Point:  80200000
   Verifying Checksum ... OK
   Loading Standalone Program ... OK
Example expects ABI version 8
Actual U-Boot ABI version 8
Hello World
argc = 0
argv[0] = "0xffffffff88000000"

With the patch, you see the following.

boston # bootm $loadaddr 123 321
   Image Name:   hello
   Image Type:   MIPS U-Boot Standalone Program (uncompressed)
   Data Size:    1240 Bytes = 1.2 KiB
   Load Address: 80200000
   Entry Point:  80200000
   Verifying Checksum ... OK
   Loading Standalone Program ... OK
Example expects ABI version 8
Actual U-Boot ABI version 8
Hello World
argc = 3
argv[0] = "0xffffffff88000000"
argv[1] = "123"
argv[2] = "321"
argv[3] = ""

Without the patch, the go command at the entry point seems to work.

boston # go 0xffffffff80200000 123 321
Example expects ABI version 8
Actual U-Boot ABI version 8
Hello World
argc = 3
argv[0] = "0xffffffff80200000"
argv[1] = "123"
argv[2] = "321"
argv[3] = ""
Hit any key to exit ...

Signed-off-by: Zubair Lutfullah Kakakhel 
Reviewed-by: Simon Glass

cmd: Split 'bootz' and 'booti' out from 'bootm'

2016-08-20T15:35:07+00:00

The bootz and booti commands rely on common functionality that is found
in common/bootm.c and common/bootm_os.c.  They do not however rely on
the rest of cmd/bootm.c to be implemented so split them into their own
files.  Have various Makefiles include the required infrastructure for
CONFIG_CMD_BOOT[IZ] as well as CONFIG_CMD_BOOTM.  Move the declaration
of 'images' over to common/bootm.c.

Cc: Masahiro Yamada 
Signed-off-by: Tom Rini

bootm: fixup silent Linux out of BOOTM_STATE_LOADOS state

2016-07-14T22:22:44+00:00

The function fixup_silent_linux() is called in status BOOTM_STATE_LOADOS
to silence Linux if variable 'silent' is set.
Currently only the 'bootm' command state machine contains
BOOTM_STATE_LOADOS, but others like 'booti' or 'bootz' commands do not.
This means silent Linux does not work with these commands.

This patch moves the fixup_silent_linux() call out of the
BOOTM_STATE_LOADOS state and into BOOTM_STATE_OS_PREP, to silence Linux
independently of the used command (booti, bootm or bootz).

Signed-off-by: Hector Palacios

bootm: Align cache flush end address correctly

2016-06-12T21:49:38+00:00

Flushing part of the cache should be done on cache boundaries. Trying to
flush part of a cache line is not supported and the request may be ignored
or print warnings.

Adjust the bootm code to align the end address to prevent this problem.

Signed-off-by: Simon Glass 
Reviewed-by: Heiko Schocher 
Tested-on: smartweb, corvus, taurus, axm
Tested-by: Heiko Schocher 
Reviewed-by: Joe Hershberger 
Reviewed-by: Andreas Bießmann

image: Add boot_get_fpga() to load fpga with bootm

2016-05-24T11:17:59+00:00

Add function boot_get_fpga() which find and load bitstream to
programmable logic if fpga entry is present.
Function is supported on Xilinx devices for full and partial bitstreams
in BIN and BIT format.

Signed-off-by: Michal Simek 
Remove additional blankline in image.h

fdt: Allow libfdt to be used in SPL

2016-03-14T23:18:26+00:00

Add an option to enable libfdt in SPL. This can be useful when decoding
FIT files in SPL.

We need to make sure this option is not enabled in SPL by this change.
Also this option needs to be enabled in host builds. Si add a new
IMAGE_USE_LIBFDT #define which can be used in files that are built on the
host but must also build for U-Boot and SPL.

Signed-off-by: Simon Glass

Kconfig: Move CONFIG_FIT and related options to Kconfig

2016-03-14T23:18:07+00:00

There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass 
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini

image: Correct the OS location code to work on sandbox

2016-02-26T15:53:10+00:00

A recent change broke the 'bootm' command on sandbox. The root cause is
using a pointer as an address. Conversion from pointer to address needs to
use map_to_sysmem() so that sandbox can do the right thing. The problem was
pre-existing but uncovered by a recent commit.

Fix this. Also move fit_get_end() to the C file to avoid needing to include
mapmem.h (and thus asm/io.h) everywhere.

Fixes: 1fec3c5d (common/image.c: Make boot_get_ramdisk() perform a check for Android images)

Signed-off-by: Simon Glass

bootm: fix size arg of flush_cache() in bootm_load_os().

2016-01-25T15:39:45+00:00

Variable _load_end_ points to end address of uncompressed buffer
(*not* uncomress_buffer_end / sizeof(ulong)), so multipling uncompressed
size with sizeof(ulong) is grossly incorrect in flush_cache().
It might lead to access of address beyond valid memory range and hang the CPU.

Tested on MIPS architecture by using compressed(gzip, lzma)
and uncompressed uImage.

Signed-off-by: Purna Chandra Mandal 
Reviewed-by: Simon Glass 
Reviewed-by: Daniel Schwierzeck

Add support for LZ4 decompression algorithm

2015-10-11T21:12:10+00:00

This patch adds support for LZ4-compressed FIT image contents. This
algorithm has a slightly worse compression ration than LZO while being
nearly twice as fast to decompress. When loading images from a fast
storage medium this usually results in a boot time win.

Sandbox-tested only since I don't have a U-Boot development system set
up right now. The code was imported unchanged from coreboot where it's
proven to work, though. I'm mostly interested in getting this recognized
by mkImage for use in a downstream project.

Signed-off-by: Julius Werner 
Acked-by: Simon Glass