u-boot.git/common/bootm.c, branch v2018.05

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

bootm: Align cache flush begin address

2018-04-17T21:45:08+00:00

commit b4d956f6bc0f ("bootm: Align cache flush end address correctly")
aligns the end address of the cache flush operation to a cache-line size to
ensure lower-layers in the code accept the range provided and flush.

A similar action should be taken for the begin address of a cache flush
operation. The load address may not be aligned to a cache-line boundary, so
ensure the passed address is aligned.

Signed-off-by: Bryan O'Donoghue 
Reported-by: Breno Matheus Lima 
Suggested-by: Tom Rini 
Cc: Simon Glass 
Tested-by: Breno Lima 
Reviewed-by: Simon Glass

fpga: allow programming fpga from FIT image for all FPGA drivers

2017-12-14T15:09:39+00:00

This drops the limit that fpga is only loaded from FIT images for Xilinx.
This is done by moving the 'partial' check from 'common/image.c' to
'drivers/fpga/xilinx.c' (the only driver supporting partial images yet)
and supplies a weak default implementation in 'drivers/fpga/fpga.c'.

Signed-off-by: Simon Goldschmidt 
Tested-by: Michal Simek  (On zcu102)
Signed-off-by: Michal Simek

common: Remove genimg_get_image()

2017-10-16T13:42:51+00:00

Removal of the legacy DataFlash code turned genimg_get_image() into a
no-op. Drop all calls to it and the function itself.

Signed-off-by: Tuomas Tynkkynen

env: Rename some other getenv()-related functions

2017-08-16T12:31:11+00:00

We are now using an env_ prefix for environment functions. Rename these
other functions as well, for consistency:

   getenv_vlan()
   getenv_bootm_size()
   getenv_bootm_low()
   getenv_bootm_mapsize()
   env_get_default()

Suggested-by: Wolfgang Denk 
Signed-off-by: Simon Glass

env: Rename getenv_hex(), getenv_yesno(), getenv_ulong()

2017-08-16T12:30:32+00:00

We are now using an env_ prefix for environment functions. Rename these
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk 
Signed-off-by: Simon Glass

env: Rename getenv/_f() to env_get()

2017-08-16T12:30:24+00:00

We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk 
Signed-off-by: Simon Glass

env: Rename common functions related to setenv()

2017-08-16T12:23:32+00:00

We are now using an env_ prefix for environment functions. Rename these
commonly used functions, for consistency. Also add function comments in
common.h.

Suggested-by: Wolfgang Denk 
Signed-off-by: Simon Glass

env: Rename setenv() to env_set()

2017-08-16T12:22:18+00:00

We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk 
Signed-off-by: Simon Glass

bootm: fix passing argc to standalone apps

2016-10-02T00:04:37+00:00

This bug appears in b6396403 which makes u-boot unable to pass
arguments via bootm to a standalone application without this patch.

Steps to reproduce.

Compile a u-boot. Use mkimage to package the standalone hello_world.bin
file.

e.g. For the MIPS Boston platform

mkimage -n "hello" -A mips -O u-boot -C none -T standalone \
     -a 0xffffffff80200000 -d hello_world.bin \
     -ep 0xffffffff80200000 hello_out

Then tftp hello_out and run it using

boston # dhcp 192.168.154.45:hello_out
...
boston # bootm $loadaddr 123 321

Without the patch the following output is observed.

boston # bootm $loadaddr 123 321
   Image Name:   hello
   Image Type:   MIPS U-Boot Standalone Program (uncompressed)
   Data Size:    1240 Bytes = 1.2 KiB
   Load Address: 80200000
   Entry Point:  80200000
   Verifying Checksum ... OK
   Loading Standalone Program ... OK
Example expects ABI version 8
Actual U-Boot ABI version 8
Hello World
argc = 0
argv[0] = "0xffffffff88000000"

With the patch, you see the following.

boston # bootm $loadaddr 123 321
   Image Name:   hello
   Image Type:   MIPS U-Boot Standalone Program (uncompressed)
   Data Size:    1240 Bytes = 1.2 KiB
   Load Address: 80200000
   Entry Point:  80200000
   Verifying Checksum ... OK
   Loading Standalone Program ... OK
Example expects ABI version 8
Actual U-Boot ABI version 8
Hello World
argc = 3
argv[0] = "0xffffffff88000000"
argv[1] = "123"
argv[2] = "321"
argv[3] = ""

Without the patch, the go command at the entry point seems to work.

boston # go 0xffffffff80200000 123 321
Example expects ABI version 8
Actual U-Boot ABI version 8
Hello World
argc = 3
argv[0] = "0xffffffff80200000"
argv[1] = "123"
argv[2] = "321"
argv[3] = ""
Hit any key to exit ...

Signed-off-by: Zubair Lutfullah Kakakhel 
Reviewed-by: Simon Glass