We say we have an XIP (in this case, image loaded at desired execution
address) when the image header has been offset in the load.  It's
possible that in some cases executing the header is non-fatal but that's
not true in many other cases.

Signed-off-by: Tom Rini <trini@ti.com>

This patch adds support for the Android boot-image format. The header
file is from the Android project and got slightly alterted so the struct +
its defines are not generic but have something like a namespace. The
header file is from bootloader/legacy/include/boot/bootimg.h. The header
parsing has been written from scratch and I looked at
bootloader/legacy/usbloader/usbloader.c for some details.
The image contains the physical address (load address) of the kernel and
ramdisk. This address is considered only for the kernel image.
The "second image" defined in the image header is currently not
supported. I haven't found anything that is creating this.

v3 (Rob Herring):
This is based on http://patchwork.ozlabs.org/patch/126797/ with the
following changes:
- Rebased to current mainline
- Moved android image handling to separate functions in
  common/image-android.c
- s/u8/char/ in header to fix string function warnings
- Use SPDX identifiers for licenses
- Cleaned-up file source information:
  android_image.h is from file include/boot/bootimg.h in repository:
  https://android.googlesource.com/platform/bootable/bootloader/legacy
  The git commit hash is 4205b865141ff2e255fe1d3bd16de18e217ef06a
  usbloader.c would be from the same commit, but it does not appear
  to have been used for any actual code.
v4:
- s/andriod/android/
- Use a separate flag ep_found to track if the entry point has been set
rather than using a magic value.

Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tom Rini <trini@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

The LZO decompressor wasn't initializing the maximum output size, which
meant it would fail to decompress most of the time.

Reported-by: Matthias Weißer <weisserm@arcor.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Matthias Weißer <weisserm@arcor.de>
Acked-by: Simon Glass <sjg@chromium.org>

do_bootm_standanlone() calls ntohl(images->ep) which is wrong because
endianess conversion has already been done:

do_bootm()
\-do_bootm_states()
  +-bootm_find_os()
  | \-images.ep = image_get_ep();
  |   \-uimage_to_cpu(hdr->ih_ep);
  \-boot_selected_os()
    \-do_bootm_standanlone()

Without this conversion the code works correctly at least on AT91SAM9G45.
On big endian systems there should be no difference after applying this
patch because uimage_to_cpu(x) and ntohl(x) both expand to 'x'.

Signed-off-by: Christian Eggers <ceggers@gmx.de>

For standalone images, bootm had a special case where the OS boot function
was NULL but did actually exist. It was just called manually.

This was removed by commit 35fc84fa which checks for the non-existence of
this function before the special case is examined.

There is no obvious reason why standalone is handled with a special case.
Adjust the code so that standalone has a normal OS boot function. We still
need a special case for when the function returns, but at least we can
avoid the main problem.

This is intended to fix the reported:

    ERROR: booting os 'U-Boot' (17) is not supported

but needs testing.

Signed-off-by: Simon Glass <sjg@chromium.org>

The next version VxWorks adopts device tree (for PowerPC and ARM) as its hardware
description mechanism. For PowerPC, the boot interface conforms to
the ePAPR standard, which is:

   void (*kernel_entry)(ulong fdt_addr,
          ulong r4 /* 0 */,
          ulong r5 /* 0 */,
          ulong r6 /* EPAPR_MAGIC */, ulong r7 /* IMA size */,
          ulong r8 /* 0 */, ulong r9 /* 0 */)

For ARM, the boot interface is:

   void (*kernel_entry)(void *fdt_addr)

Signed-off-by: Miao Yan <miao.yan@windriver.com>
[trini: Fix build error when !CONFIG_OF_FDT is set, typo on PowerPC,
missing extern ft_fixup_num_cores]
Signed-off-by: Tom Rini <trini@ti.com>

do_bootm_vxworks now is available under the configuration option
CONFIG_BOOTM_VXWORKS, thus aligned with other operating systems
that supported by bootm command. The bootvx command still depneds
on CONFIG_CMD_ELF.

Signed-off-by: Miao Yan <miao.yan@windriver.com>

The documentation suggested the arguments where passed over r3-r6
while the code below simply does that over r0-r3.

Cc: Kumar Gala <galak@kernel.crashing.org>

In commit "5c427e4: use BOOTM_STATE_OS_CMDLINE flag for plain bootm"
and "3d187b3: Only pass BOOTM_STATE_OS_CMDLINE on PowerPC/MIPS",
BOOTM_STATE_OS_CMDLINE was added to do_bootm for PowerPC and MIPS. This
breaks other OSes (vxworks, netbsd, plan9,...) that don't support
subcommand processing, e.g. they all contain the following code in their
do_bootm_xxx():

    if (flag & BOOTM_STATE_OS_PREP)
            return 0;
    if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
            return 1;

which will result a "subcommand not supported" error.
This patch changes the above logic to:

    /* if not go command, pretend everything to be OK */
    if (flag != BOOTM_STATE_OS_GO)
         return 0;

Signed-off-by: Miao Yan <miao.yan@windriver.com>